PROVISION OF HARD STANDING AND CHANGING ROOM NEAR CULVERTS AT LEKAWADA

Amount

SCHEDULE 'A'

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed.

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 m depth for foundation etc. Or for shafts , wells manholes, pier holes etc. N exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

all as per item No. 2.0 above but exc 1.5 m but n exc 3.0m depth complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified

Removing excavated material n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Earth filling under floors including spreading , levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas,exc 1.5 m but n.exc 3.0 m deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, n exc 3.0 but nexc 4.5 m deep and getting out in soft /loose soil complete all as specified and directed.

M&L for RCC M-30 grade in Walls, Retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for hardcore of broken stone or boulders , gauge not 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and directed.

M&L for Plain Cement concrete1:4:8 (type D-2) ( using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with Fly Ash bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-30(Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as directed.

M&L RCC M-30(Design Mix) using 20mm graded stone aggregates in Columns, pillars, piers, posts and struts complete all as directed.

M&L RCC M-30 (Design Mix) slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for rough finish formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed

M&L for rough finished formwork to sides and soffits of floor or rooof beams, beam haunching, girder s , lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work : not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no 23.00 above but 6mm to 8mm dia as in stirrups complete all as specified and directed

M&L for screed bed or bedding layer or mortar 15 mm thick over roof finishes in CM 1:6 finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3.5 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application all as directed.

M&L for preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete as directed.

Supply only integral waterproofing compound ISI marked complete all as specified and directed.

Rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) including finished even and smooth without using extra cemnet complete all as specified and directed.

Rendering 15 mm thick cement plaster in CM 1:4 on other faces on brick masonry (External surface) complete all as specified and directed

Rendering 5mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of OBD on newly plastered surfaces over a coat of primer over a coats of wall care putty 1 mm thick including preparing the new wall surfaces complete all as specified and directed.

Preparing new plastered surfaces and applying three coat of white wash on Ceiling complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

M&L preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F stainless steel grating doom 100 mm dia all as directed

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed complete all as specified and directed

S&F angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore complete all as specified and directed

S&F Toilet Roll Holder with flap, Make : Jaquar (Cat Pat No AQN-7753) or equivalent as approved by GE. complete all as specified and as directed by Engr-in-Charge

S&F 5 mm thick glass looking mirror with chamfered edges of minimum size 600mm x 500mm fixed with minimum 4 Nos stud at each corner of mirror complete all as specified and directed

S&F Soap Dish Polycarbide, Make : Jaquar (Cat Pat No AQN-7733) or equivalent as approved by GE. complete all as specified and as directed .

Supply & fix Hand Shower (health faucet) 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hok with NRV (Back Flow Preventer) as approved by the GE. Make- Jaquar (Cat Pat No- ALD-CHR-579) or equivalent. complete all as specified and as directed by Engr-in-Charge

S&F fancy type CP Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified

S&F viterous China table top wash hand basin white size 160mm x 495mm x 365mm as per Jaquar Cat Part SLS-WHT-0558 complete all as specified and directed.

S&F 32mm dia PVC (flexible) waste pipe, 800mm long for WHB complete all as specified and directed.

S&F EWC bowl for extended wall hung-WC with soft closing seat cover, size 635 x 365 x 770 including cistern with cistern fittings Make - Jaquar (Cat pat No - CNS-WHT-353S) complete all as specified and directed by GE.complete all as specified and as directed .

S&F 15mm brass CP Central Hole Basin Mixer quarter turn with Popup waste system with 450 mm long braided hoses etc. Make : Jaquar (Cat pat No CQT-CHR-23169B or equivalent as approved by the GE as per the list of makes. complete all as specified and directed

S&F Tubular towel rail CP Brass, 60cm long between flanges complete all as specified and as directed .

S&F towel ring PTMT fiexd with Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed

S&F 15mm brass CP Wall Mixer quarter Turn with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges , Make : Jaquar (Cat pat No CQT-CHR-23273UPR or equivalent as approved by the GE as per the list of makes complete all as specified and directed.

S&F Brass chromium plated swivel shower rose 450mm size including shower arm 450mm Make : Jaquar (Cat Pat No OHS-1989 and SHA-479L600) or equivalent as approved by GE. complete all as specified and as directed .

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and as directed

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified and as directed

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and as directed.

PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls110 mm bore complete all as specified and as directed

PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed

Salt-glazed stoneware gully traps, square or round mouthed, type `P' size 150mmx150 mm complete all as specified and as directed.

PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm complete all as specified and as directed

PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm complete all as specified and as directed

S&F Rotatinal moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 500 litre complete all as specified and as directed

PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and as directed

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for Virified Ceramic tiles double charged dark shade10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set with CM(1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per item no 71 above but 10mm thick CM 1:4 on vertical surfaces/skirting complete all as specified and as directed by Engr-in-Charge

M&L for 25 mm Thick PCC 1:2:4 type B0 under floor tiles finished even and smooth without using extra cement

M&L for 75 mm thick PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection/ Paths etc finished even & fair complete all as specified

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed .

Rounding to edges of stone slabs one edges such as in steps, cooking platform, shelves and other similar situations complete all as specified and directed.

M&L for Medium density fibre board interior grade 18 mm thick solid construction type, fixed in CBs door shutters on timber frame work with screws /nails complete all as specified.

M&L for 0.9 mm thick Decorative laminate type-1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F butt hinges type B-12 or (overlay/ self / auto closing hinges ) for cupboard / shelves shutters of size 125 mm complete all as specified

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions .

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions .

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engr-in-Charge

S&F Butt hinges, 100 mm medium weight, cold rolled mild steel complete all as specified and as directed by Engr-in-Charge

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm complete all as specified and as directed by Engr-in-Charge

S&F Aluminium, anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F Morticelock aluminium anodised vertical type 04 levers 100mm size with keys complete all as specified and as directed .

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge

S&F SS handle 100 mm long ,complete all as specified and as directed.

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0M X 4.5M

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete( Fe 410 -W (GdeE- 250)

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

RCC pipes 150 mm class NP-2 laid and jointed complete with collars complete all as specified

M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc including necessary form work complete all as specified and as directed

M&L for Glossy finished pre polished coloured machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658-2006 of 80 mm thickness , M-40 grade with grey cement and pigments complete all as specified

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for PCC 1:2:4 tyep B-1 ( using 20 mm graded stone aggregate) as in kerbs or mud stops , rounded or chamfered on edges complete all as specified.

S&F in 75 mm bore PVC (SWR) pipes as in wheep holes complete all as specified

M&L for using Graded coarse aggregate 20 mm as in invert filter complete all as specified

M&L for using Graded coarse aggregate 63- 40 mm as in invert filter complete all as specified

M&L for sand filling as in invert filter , and back filling etc. including watering and consolidation complete all as specified

M&L for Brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified

M&L for Reinforced cement concrete pipes, class NP-2 ,600 mm bore of pipe, laid and jointed complete with collars etc complete all as specified

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified.

M&L applying two coats of cement based paint over a coat of primer including preparation of new plastered surfaces of wall complete all as directed

M&L for 200-250 mm thick stone boulder pitching with dressed edge stones, laid and grouted with cement and sand mortar 1:6 on area complete all as specified .

M&L for Cement concrete 1:2:4 type B-2 ( using 20 mm graded crushed stone aggregate) as in coping over walls /drains etc complete all as specified

M&L for 50 mm Cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in flooring / sub base etc complete all as specified

M&L for Cement concrete 1:2:4 type B-2, ( using 20 mm graded crushed stone aggregate) as in surface channel and drains etc complete all as specified

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through and including stove enamelled steel concealed conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site ,complete all as directed for the following.

(a) One light point controlled by one switch.

(b) One light point controlled by two, two way switches.

(c) One fan point controlled by one switch.

(d) One bell point controlled by one switch.

(e) –do- but one 3 Pin socket out let 5 Amps on the same board.

(f) -ditto- but one 3 pin socket out let 5 Amps on the independent board.

All as per item No 2 above but 2.5 sq mm wire for 15 amps power socket point.

S&F Modular metal flush box 1/2 module

S&F Modular metal flush box 3 module

S&F Modular metal flush box 4 module

S&F Modular metal flush box 6/8 module

S & F white cover plate with frame , 1 module

S & F white cover plate with frame , 2 module

S & F white cover plate with frame , 3 module

S & F white cover plate with frame , 4 module

S & F white cover plate with frame , 6 module

Supply & Fix modular switch one way 6A,1 Module,

Supply & Fix modular switch one way 16A,1 Module,

Supply & Fix modular bell push 6A,1 Module,

Supply & Fix modular socket 6/10A-2/3 pin combined 2 Module

Supply & Fix modular socket 16/15A-2/3 pin combined 2 Module

Supply & Fix modular step type fan regulator 120W 2 Module

S&F Supply only ceiling rose 3 Terminal/polycarbonate,isolated body

Supply & Fix lamp holder, insulated body with back plate for battern fitting.

S&F Bell Multi Music type

M&L for Sub main wiring with two runs of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including steel surface / recessed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

M&L for Sub main wiring with two runs of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including steel surface / recessed conduit heavy duty grade ISI marked 25mm dia (external) including conduit accessories like bends, tees, junction boxes etc including 4.0 Sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED tube light fitting 1x20 watt 220 volts AC, decorative type with driver, holder and LED Tube including ceonnecting with three core flexible copper conductor cable of suitable size from ceiling rose complete

S&F in repair decorative wall light, gold finish fixture with white glass diffuser suitable for and including 7.5 W LED filament lamp E27 base as per cat part No LHFOAKD1TZ1D060 of Havells or equivalent Philips/Bajaj/Orient

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 6 litre, BEE 5 Star rated complete with all acessories such as safety valve, thermostate,NRV, connection piece etc. of Make-Havells Cat Part No-GHWGFLSW006 or equivalent

Supply and fix exhaust fan made of sturdy Engineering plastic complete withlouv ers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm sweep

Supply and Fix wall mounting Fan 400 mm sweep, single phase Make-Havells Platina or equivalent Make of Bajaj/Orient

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 8 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge.

S&F MCB SP 6 to 32 Amps, 'C' Series 10 KA.

S&F MCB SPN 230 volts 32 Amps 10 KA, 'C' Series.

S&F in repair to replacement single pole and neutral enclosure with two pin and earth plug and socket with steel enclosure complete with one single pole MCB 20 Amps

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core

Material and Labour for DWC pipe laying in trenches/ under floor/on walls for protection of UG cables of size 50 mm OD, complete with coupler and connected accessories all as specified and directed by Engr-in-Charge. Note: (i) Cutting of floor/ road and making good with PCC deemed to be included in item rate Make: Rex/Poly/Geminie

ALBA AC AND REF SERVICES

Ramdev and Sons

Shree Builders

divyarsh entrprise

Shreeganesh Construction

DMA PROJECTS

GIRNAR CONSTRUCTION

ARTI CONSTRUCTION