Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹10.5 L+₹30,296.87 (2.97%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Marjan V K L1 | SUNEER V N L2 |
|---|---|---|---|---|---|
| 1.00Building renovation | |||||
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 31.28 | kg | 550 ₹17,205.65 | 537.56 ₹16,816.49 Lowest |
| 1.00 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 50.43 | kg | 550 ₹27,736.5 Lowest | 651.11 ₹32,835.48 |
| 1.00 | OD543536/2025-2026:Providing and fixing 3 mm thick hylam fabric sheet in panelling fixed in aluminium door shutters and partition frames with CP brass/stainless steel screws etc complete as per architectural drawings and directions of Engineer in charge decorative hylam sheet on both sides | 6.8 | sqm | 1,200 ₹8,164.8 Lowest | 1,413.67 ₹9,618.61 |
| 1.00 | OD545769/2025-2026:Providing and fixing steel piano hinges/soft close clip including all charges | 52 | each | 50 ₹2,600 Lowest | 241.89 ₹12,578.28 |
| 1.00 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet | 102 | sqm | 60 ₹6,120 Lowest | 73.52 ₹7,499.04 |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,513.67 | kg | 220 ₹3,33,006.52 | 212.3 ₹3,21,351.29 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 484.8 | kg | 160 ₹77,568 Lowest | 171.96 ₹83,366.21 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 106.38 | sqm | 160 ₹17,020.48 | 151.56 ₹16,122.65 Lowest |
| 1.01 | OD543341/2025-2026:Providing and fixing 30 mm overall thick Insulated Roofing sheet consisting PU form having density of 40 kg/m3 sandwiched between two pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm thick (+0.05%) on face #1 and , and 0.35 mm thick on Face #2 total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-
18 Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x100mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.. OD BASED OF 112.50 of DAR 2018 | 247.5 | sqm | 2,100 ₹5,19,750 Lowest | 2,187.02 ₹5,41,287.45 |
Tender Value
₹10.7 L
EMD Value
₹26,677
Closing Date
26 Sept 2026, 3:00 pmClosed
Assistant Engineer
LID and EW Sub Division Kalliasseri Block Panchayath
New construction
2026_LSGD_869518_1
AEE/KLSY/PROJ NO 35/26RETEN1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kalliasseri
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹26,677
Yes
9 Oct 2026
19 Sept 2026
28 Sept 2026
19 Sept 2026
26 Sept 2026
19 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Building renovation | |||||
| 1.001 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 31.28 | kg | - | - |
| 1.002 | 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 50.43 | kg | - | - |
| 1.003 | OD543536/2025-2026:Providing and fixing 3 mm thick hylam fabric sheet in panelling fixed in aluminium door shutters and partition frames with CP brass/stainless steel screws etc complete as per architectural drawings and directions of Engineer in charge decorative hylam sheet on both sides | 6.8 | sqm | - | - |
| 1.004 | OD545769/2025-2026:Providing and fixing steel piano hinges/soft close clip including all charges | 52 | each | - | - |
| 1.005 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet | 102 | sqm | - | - |
| 1.006 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,513.67 | kg | - | - |
| 1.007 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 484.8 | kg | - | - |
| 1.008 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 106.38 | sqm | - | - |
| 1.009 | OD543341/2025-2026:Providing and fixing 30 mm overall thick Insulated Roofing sheet consisting PU form having density of 40 kg/m3 sandwiched between two pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm thick (+0.05%) on face #1 and , and 0.35 mm thick on Face #2 total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-
18 Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x100mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.. OD BASED OF 112.50 of DAR 2018 | 247.5 | sqm | - | - |
stage.html
html • 0.02 MB
finance_1473381.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
PRELIMINARYAGREEMENT.pdf
Tender Documents • 0.34 MB
EPAY.pdf
Tender Documents • 0.24 MB
INTEGRITY.pdf
Tender Documents • 0.24 MB
AFFIDAVIT.pdf
Tender Documents • 0.16 MB
FORMOFTENDER.pdf
Tender Documents • 0.20 MB
BOQ_1473381.xls
BOQ • 0.31 MB
SBD.pdf
Tender Documents • 1.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .