Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC NIL | L1 | Accepted-AOC Being L-1 | |
| 2 | L2₹20.5 L+₹6,876.92 (0.34%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI WEST BENGAL PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹21.7 L+₹1.2 L (6.07%)Rejected-Finance VILL DURGA NAGAR CHECK POST PO ETHELBARI DIST ALIPURDUAR PIN 735204 WB | ALIPURDUAR | WEST BENGAL | 735204 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹21.7 L+₹1.2 L (6.11%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹22.5 L+₹2.1 L (10.1%)Rejected-Finance 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L5 | Rejected-Finance L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Binnaguri
Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
WELCOME MAINTENANCE TO OFFICERS MD ACCN AT CENTRAL ZONE UNDER GE NORTH BINNAGURI
2023_MES_573693_1
NIT No . 8701/ 55/ 2022-2023 / 02 / E8
Open Tender
Civil Works
Item Rate
270 days
Binnaguri
Category D class a(i)
8 documents required · 8 mandatory
₹500
Yes
GE North Binnaguri
₹60,000
Yes
15 Mar 2023
7 Jan 2023
6 Feb 2023
7 Jan 2023
4 Feb 2023
21 Jan 2023
Amount
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm each etc including removing material from work site complete all as specified and directed.
Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.
Supply and fixed rolled mild steel in framed work as in doors frame work or gates of angle or other section with gusset plates, rails, braces,etc., complete, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening .grade Fe-410-W ( Gde-E-250) quality -A including complete all as specified. (door fittings like hinges , tower bolt etc shall be measured and paid separately)
Supply and fixed 30 mm thick factory made door Flush shutters , solid core construction, with particle board core and plywood face panels, commercial type on both sides including for the provision of suitable blocks for mortice locks, latches or other fittings etc complete all as specified and directed.
Supply and fixing of 35mm thick factory made 2nd class hard wood gauged and skeleton shutter open rebated and prepared to receive glass , gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.
Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.
Supply and fixing 150 mm size Extruded aluminium alloy handles, fabricated type, anodized complete all as specified.
Supply and fixed of 125 mm long medium weight cold rolled mild steel butt hinges complete all as specified and directed.
Supply and fixing 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.
Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1 st quality) with a coat of pink primer all as specified and directed.
Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar dovetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.
Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar dovetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.
Supply and fixing in repair factory made steel windows or ventilators, top hung type including hinges, steel peg stay, fixing lugs etc with or without glazing bars complete all as specified.
Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enameled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.
Supply and fixed stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , figured glass, pin head type and glazing with oil putty in squares n exc 0.50 sq.m. in each pane complete all as specified.
Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade including wall putty/white cement wherever required to fill the wall cracks/holes complete all as specified and as directed. complete all as specified.
Material and labour for complete removal of old decorated wall concrete surface and by applying Wall care white ( Putty) and sand papering surfaces to achieve smooth surfaces and applying two coats, of acrylic distemper white or tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified ..
Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all droppings etc. all as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as specified.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.
Material and Labour for rendering 15 mm thick on other than fair faces of brick or concrete surfaces finishing surfaces fair and even without using extra cement in Cement mortar 1:6 all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying a coat of wall care white putty and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for rendering 5mm thick on concrete surfaces in ceiling, soffit of slab, chajjas, columns and beams etc. in cement and sand mortar 1:3 complete all as specified
Material and labour for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each etc including removing material from work site complete all as specified and directed.
Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, paneling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.
Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.
Supply and fixed of 100 mm long stainless steel butt hinges complete all as specified and directed.
Supply and fixing in repairs 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.
Supply and fixing in repair 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.
S& F in repairs for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
Supply and fixing in repairs CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges with bracket complete all as specified.
Supply and fixed in repair, pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.
Supply and fixed in repairs cast brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.
Supply and fixed in repairs of grating doom 125 mm dia of PTMT (Minimum weight 40gms) with waste hole complete all as specified.
S&F in repairs Bib taps fancy type brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed. (Make : ESSCO/Marc/jaquar).
Supply and fixed brass CP angular stop cock one way with flange long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified
Supply and fixed in repairs stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets embedded in wall with suitable size PCC (1:3:6) type C-1 blocks , or fixed over drawf walls ,connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 355 mm x 165 mm complete all as specified and as directed.
Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but including providing brackets, waste pipe & CP waste coupling , PVC connection 450 mm long complete all as specified and as directed.
Supply and fixed in repairs low level flushing cistern , 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including inlet ball valve float and handle including fixing brackets including PVC connection pipe 450 mm long, and flush pipe of required length , and connection to pipe etc complete all as specified and directed.
Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.
Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device,including making all necessary connections complete all as specified and as directed.
Supply and fixed in repairs plastic water closet seat cover white closed pattern /anglo Indian type with flat bottom and cover including aluminium hinging devices complete all as specified.
Supply and fixing in repairs chromium plated health faucet 25 mm dia with 1.5m flexible tube and wall hook fixed in position complete all as directed.
Supply and fixed in repairs PVC connections 15 mm size with check nuts with washers of length 450 mm complete all as specified.
Supply & fixed in repair, 32mm bore flexible pipe of PVC fixed to WHB/ urinals / kitchen sink as waste pipe ( not less than 1000 mm) complete all as specified.
S&F in repair 20mm dia , Stain less steel, Curtain rod complete as specified and as directed.
S&F in repair stainless steel curtain rod holding brackets heavy duty fixed to wall with stainless steel screws complete all as specified and as directed.
S&F in repair stainless steel final of approved shape and size suitable for 20mm dia curtain rod complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,20 mm bore dia all as directed.
Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed complete all as specified.
Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15 mm thick screeding in CM 1:6 complete all as specified ( screed bed shall not be measured and paid separately).
Material and labour for glazed ceramic coloured / digital printed of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. ( screed bed shall also deemed to be included in the quoted rate by the contractor ).
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.bedded and pointed in any mortar including removing of demolished material from work site complete all as specified and directed.
Material and labour 18 to 20 mm thick Granite, (table rubbed and polished) in decorative shelves, steps, pillar, jambs, cocking platform including bedded and jointed in cement mortar ( 1:4) including cutting and polishing, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screeding in CM 1:6 complete all as specified.( Note Screed bed shall not be measured and paid separately).
Supply and fixed in repairs 18/19 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet shutter/ cupboard wall paneling including 6 mm thick wooden beading complete all as specified.
Supply and fixing 75 mm size Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22 complete all as specified.
Supply and fixing 100 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.
Supply and fixing 100 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.
Supply and fixed for 75mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
Supply and fixed in repair, CP stop valve ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified
Hacking out old broken glass ( any thickness , size , quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm and providing 3mm thick sheet glass fixed with oil putty in square n.exe 0.5 sqm in each complete all as specified.
Supply and fixed in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Dismantling existing PVC water tanks and setting aside exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified and as directed.
Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylindrical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified incluidng taking down old broken / damaged water tank including removing to store including all fittings complete all as directed.
Supply and fixed in 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. (Make: PRAYAG/Leader/Kirloskar/Zoloto).
INTERNAL ELECTRIFICATION Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.
Material & Labour for concealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including pressed steel terminal switch boxes, 3mm thick bakelite sheet top cover (ISI marked) fixed by means of brass machine screw and cap washer including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust fan/ bell point complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.
All as per item No.75 here-in-before but for one 3 pin 5/6 Amps switch socket out let point controlled by one switch on the independent board
All as per item No.75 above but One 3 pin 5/6 Amps switch socket out let point controlled by one switch on the same board complete all as specified.
All as per item No. 75 above but One light point controlled by two way switch 5/6 amps.
Material and labour for point wiring 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLS earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.
Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.
Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified.
Supply and fixed socket outlet 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.
Supply and fixed socket outlet 2 in 1, 5 Pin, 5/15 amps, white ivory finish flash type complete all as specified and as directed.
Supply and fixed switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.
Supply and fixed switch socket combination 2 and 3 pin , 5/6 Amps, multipurpose flush non shutter , non inter locking type white/ ivory finish complete all as specified and as directed.
Supply and fixed switch socket combination 2 in 1, 5 pin 5/6 amps and 15/16 amps multipurpose, white / ivory flush non shuttered non inter locking type complete all as specified.
Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
Supply and fixed in repair switch piano flush type, single pole , 6 Amps, one way complete all as specified.
Supply and fixed in repair switch socket combination 2 and 3 pin , 5/6 Amps, multipurpose flush non shutter , non inter locking type white/ ivory finish complete all as specified and as directed.
Supply and fixed in repair switch socket combination 2 in 1, 5 pin 5/6 amps and 15/16 amps multipurpose, white / ivory flush non shuttered non inter locking type complete all as specified.
Supply & fix in repairs modular switch 1 way 6/10A,1 module, 230 Volts, including necessary connection complete all as specified.
Supply & fix in repairs modular switch 1 way 16/20A,1 module, 230 Volts, including necessary connection complete all as specified.
Supply & fix in repairs modular socket, 6A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified.
Supply & fix in repairs modular socket, 6A/16A-2/3 pin combined 2 module, 230 Volts AC including necessary connection complete all as specified.
Supply and fixed in repairs stepped type electronic fan regulator 120 watts 230 volts 50 Hz , 2 modules , 230 Volts AC including necessary connection complete all as specified.
Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified.
Supply & fixed in replacement LED white glass Lamp 1 x 09 Watts, 230V Base-22 complete all as directed.
Supply & fixed call bell / bell ding dong suitable to work on 230 volts AC, 50 Hz, 230 volts AC supply incluidng taking down old unserviceable one complete all as specified and as directed.
Supply & fixed in deluxe fan electronic regulator 120/180 volts AC 50 Hz rotary steps white/ivory finish ISI marked complete all as specified .
S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaries efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.
S&F of Bulk head luminaries with B22 base holder suitable for 9 Watt LED inverter type bulb light IP66 grade, with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified.
Supply and fixed in repairs building security light fitting with 25 watts LED made up of pressure die cast aluminium housing with PC cover having top opening including separate driver comportment with IP 66 protection & impart resistance of IKO7 with operating voltage range of 140V to 270 V complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to ceiling rose including GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting all as directed by Engineer-in-Charge complete all as specified.
S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified. Make: Havells/Crompton/Surya/Philips.
S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaries efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.
S & F Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down the old unserviceable fitting, complete all as directed by Engineer-in-charge. Make: Havells/Philips/Bajaj/CG.)
S & F Recess round shape LED ceiling light 12 Watt fitting (6'' outer dia) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection including taking down the old unserviceable fitting, complete all as directed by Engineer-in-charge.
M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit with and including taking down unserviceable sub main, complete all as specified and as directed.(NOTE : (i)Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length)
M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side open able with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc including taking down the old unserviceable fitting complete all as specified and as directed.
Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed. Make :- Legrand / C&S/L&T.
Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down the old unserviceable one complete all as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including removal of old unserviceable sheet metal enclosure all as specified.
S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed. Make :L & T ,Cat No: BB40630C,& Eqv to Legrand/ Hager/ABB/C&S.
S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one as specified and as directed.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one as specified and as directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection including taking down old one complete all as specified and as directed.
S K GUHA
SHRI ARABINDA GHOSH
M/S MOHAN KUMAR BANSAL
M/S SINHA ENTERPRISE
M/s. MD IRSHAD
L. B. SHARMA
M/S S.K.DAS
BBKundu
M/S RELIABLE CONSTRUCTION CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .