SPL REPAIRS TO BLDG NO MH-20/01 AND MH-20/02 (OFFRS MD ACCN) AT THILLARY LINE AND PROVN OF WATER SUPPLY LINE AND CONNECTED WORK FROM WL-20 TO MAIN PUMP HOUSE AT KANNUR UNDER GE (ARMY) TRIVANDRUM

Amount

Demolition of ridges and hip tiles any thickness complete all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in unframed work, in any position complete all as specified and directed.

M&L for second class hardwood in scantlings, clean sawn, timber framed, as in rafters and purlins, etc without finish complete all as specified and directed.

S&F rolled mild steel structural work in rectangular/tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work of grid size 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions in ceiling flat or sloping in joint less finish with jointing compound and jointing tape complete all as specified and directed.

M&L for preparation of newly ceiling surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/ dense soil complete all as specified and as directed.

M&L for PCC 1:3:6, Type C2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete or similar works, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 1.60 mm thickness mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth with applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and directed.

S&F rolled mild steel works for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling water tanks exceeding 500 Ltr not exceeding 1000 ltrs capacity and removing to store complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks 1000 Ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves valve all as specified in SSR Part I as directed by Engineer in charge complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks 500 Ltr capacity, white (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves valve all as specified in SSR Part I as directed by Engineer in charge complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L Reinforced cement concrete (nominal mix) type B1, 1:2:4 (using 20 mm graded aggregate) as in slab including necessary form work complete all as specified and as directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, and removing the debris from the premises upto 1 KM from the defence area complete all as specified and directed.

M&L for providing pre-cast cement concrete block masonry with solid blocks, exceeding 10cm in width with PCC (1:3:6), type C1, using 20mm graded stone aggregate and set in cement mortar (1:6) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick cement mortar on stone surface as backing coat in CM 1:4 finished rough to receive tiles complete all as specified and directed.

M&L for vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirting, dado, and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) on vertical surfaces as skirting, dado, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match, including 10mm thick CM as backing coat in CM 1:4 set and jointed and pointed in white or coloured cement to match complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut Kota stone 20-25mm thick as in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for glazed ceramic coloured tiles on vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L 20mm thick black Granite (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and urinal partition etc including grounding smooth and exposed edges and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S&F in repairs Vitreous China wash down water closet pan, white (excluding flushing cistern and flush pipe) pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc complete including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repairs flushing cistern, low level,10 Litres capacity, PVC white,valveless syphonic action type, with inlet, ball valve, float and handle including brackets for support, low or high density PVC flush pipe, complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm including brackets or erecting stand complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, size 15 mm bore dia, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs stop valves, 15 mm bore dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement cement complete all as specified and directed.

Taking up or down steel tubing and connections upto 25 mm dia including cleaning for refixing or removal to store complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed.

S&F 15 mm bore dia unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F 25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

S&F stop valves, 25 mm bore dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F stop valves, 20 mm bore dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs bib tap, size 15 mm bore dia, cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs brass chromium plated shower arm 15 mm size, 195mm long with bend of 45degree with flange complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes upto 150mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, on walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, on walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) bends any radius for 75mm bore dia pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius with access door for 75mm bore dia pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius for 110mm bore dia pipe complete all as specified and directed.

S&F PVC (SWR) junction, single (Single T) equal or unequal for 110mm bore dia pipe complete all as specified and directed.

Taking down chowkats with shutters any description not exceeding 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats with shutters any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down wooden shutters any description exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down and refixing shutters after carrying out necessary repair easing and adjusting any description in the same opening and exceeding 1.0 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 18/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws as in shutters/ shelves including necessary framework, with mild steel hinges of 50 mm, hasp and staple of 100 mm mild steel stove enameled black type including bolt and hinges fixed with screws, SS drawer handle flush drop 75 mm and ball catch magnet spring in each door shutter complete all as specified and directed.

S&F in repairs 5.5mm thick sheet glass one side frosted, ordinary quality and glazing with oil putty or fixed with beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Cutting holes in brick walls built in cement mortar exceeding one brick but not exceeding two brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F mild steel works for flat iron hold fast and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PCC 1:2:4, type B1 using 20mm graded stone aggregate for fixing hold fast, coping, bed block etc including necessary form works complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, size 150mm fixed in floor complete all as specified and directed.

M&L for second class hardwood glazed and skeleton shutters, 35 mm thick open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); and fitted to chowkats complete all as specified and directed.

M&L for second class hardwood plain fillets/ beading not exceeding 3 Sq cm, square, rectangular or rounded on one edge or face, fixed with screws and wrought complete all as specified and as directed.

S&F 150 mm (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 100 mm (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges, medium weight complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed.

M&L preparing old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and directed.

M&L for preparing treating backs of chowkats, area tarred exceeding 0.1 sq. m but not exceeding 0.5 sq. m each, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparing treating small articles such as holdfasts area not exceeding 0.1 sq. m each, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken window/ ventilator glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for providing 75 mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finished even and fair without using extra cement including necessary form work complete all as specified and directed.

Taking down cement or cement lime plaster on brick/ stone walls or in ceiling surfaces including racking out joints hacking for key scrubbing down with water etc and removing rubbish outside MD land complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in cement mortar (1:3) on ceilings of concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/stone masonry surfaces, finished the surface even and smooth without using extra cement on external wall complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on stone masonry surfaces, finished the surface even and smooth without using extra cement on internal wall complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and applying one coat of wall primer (water thinnable/solvent thinnable), 2mm thickness wall care putty over plastered surface to prepare the surface even and smooth, applying one coat priming with alkali resistant priming paint and applying two coats of distemper oil emulsion to be applied by approved applicator of the manufracturer of the paint complete all as specified and directed.

M&L for preparation of new wall surfaces by sanding the surfaces and applying one coat of wall primer (water thinnable/solvent thinnable) , 3mm thickness wall care putty over plastered surface to prepare the surface even and smooth, applying one coat priming with alkali resistant priming paint and applying two coats of distemper oil emulsion to be applied by approved applicator of the manufracturer of the paint complete all as specified and directed.

M&L for complete removal of existing treatment on external wall surfaces, providing and applying 1 mm thickness wall care putty over plastered surface to prepare the surface even and smooth and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparing new plastered external wall surfaces, providing and applying 1 mm thickness wall care putty over plastered surface to prepare the surface even and smooth and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack 1mm thick for kitchen overall size 90cm x 90cm x 20cm standared pattern/ design weight not less than 6.57Kg each complete all as specified and directed.

S&F in repairs anodised aluminium alloy curtain rod decorative type powder coated 20mm dia with fixing brackets, stops, rollers etc.complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in any description as in padding concrete in roof (other than ground floor) complete all as specified and as directed.

M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on RCC roof slab, finished the surface fair and even, mixed with water proofing compound @ 3% by the weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for water proofing treatment to RCC roof with APP modified water proofing membrane of 3 mm thick and weight not less than 3.80 kg per Sqm as per IS 16540-2017/ IS-16532-2017 mineral finish, reinforced with non woven polyester matt (weighing not less than 150 Gms/Sqm) by torch application, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sq.m including cleaning surfaces of same manufacturer conforming to IS 3384-1986. APP membrane shall be fixed laid by torch application including minimum 10 cm side overlap and 15 cm end lap as per manufacturer's instructions complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and directed.

Taking down rolling shutter, including top cover anchoring rod, hasp and staple any size erected in position as indicated complete manual type and refixing the same in position after the erection all as directed by the Engr-in-charge.

S&F in repairs steel rolling shutters of 1 mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F in repairs ball bearing for rolling shutters complete all as specified and directed.

Running welding in repairs thickness of metal to be welded exceeding 6 mm but not exceeding 9mm all as directed by the Engr-in-charge.

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2 using 40mm graded stone aggregate as in sub-base or similar work, complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25 mm thick, coloured set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick in CM 1:6 screed bed complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor partly concealed in wall through PVC conduit and conduit accessories and partly surface on ceiling/ roof through PVC conduit and accessories of suitable size with modular metal flush boxes of suitable size & modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as specified and directed Note: Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switches/ sockets, regulators, bell push etc and cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.

All as per item No. 139.00 here in before, but for one ceiling/ exhaust fan point controlled by one way switch and regulator complete all as specified and directed.

All as per item No. 139.00 here in before, but for one bell/ buzzer point controlled by one bell push button complete all as specified and directed.

All as per item No. 139.00 here in before, but for one 2/ 3 Pin, 5 Amps socket outlet on independent board complete all as specified and directed.

All as per item No. 139.00 here in before, but for one 2/ 3 Pin, 5 Amps socket outlet on same board with other switches/ sockets complete all as specified and directed.

All as per SI item No. 139.00 here-in-before, but for one switch socket outlet, 3 pin 16 Amp on independent board with 2.50 Sqmm FRLS cable and 2.50 sqmm cable earth continuity wire complete all as specified and directed.

All as per SI item No. 139.00 here-in-before, but for one switch socket outlet, 3 pin 16 Amp on independent board with 4.00 Sqmm FRLS cable and 4.00 sqmm cable earth continuity wire complete all as specified and directed.

S&F modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed.

S&F modular socket, 6A - 2/3 pin combined 2 module, flush type complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and directed.

S&F modular bell push 6A, 1 module, 240 Volts complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module, flush type complete all as specified and directed.

S&F ceiling rose, 3 terminals PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F modular fan step regulator, 120W - 2 module, 240 Volts, 50 Hz complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 14 watts LED lamp, B22 base complete all as specified and directed. Havells cat No. LHFOECE1TZ1B014 or equivalent make in CA

S&F LED bulb with B22 gear 15 watts of minimum efficacy 120 lumen/ watt complete all as specified and directed.

S&F call bell, AC, 230 volts, single pole complete all as specified and directed.

S&F LED batten extruded aluminium body with PC diffuser in unique square shape >120 degree wide distribution, 2 feet 10 watts of minimum efficacy 120 lumen/ watts LED batten 2 feet 10 watts, CCT 6500 K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceable light fitting complete all as specified and directed.

S&F LED batten extruded aluminium body with PC diffuser in unique square shape >120 degree wide distribution, 4 feet 20 watts of minimum efficacy 120 lumen/ watts LED batten 4 feet 20 watts, CCT 6500 K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceable light fitting complete all as specified and directed.

S&F in replacement submain wiring with using two single core 6.0 Sqmm copper multi-stranded conductor PVC insulated and unsheathed (FRLS) cable and one single core 6.0 Sqmm copper multi-stranded conductor PVC insulated and unsheathed (FRLS) Earth wire using ISI Marked IS 694 1100 volts grade PVC insulated flexible stranded copper conductor wire drawn through with and including medium grade concealed PVC conduit ISI marked not less than 25 mm dia including conduit fitting and accessories complete including cutting chases in existing wall of any description built in cement mortar and making good the disturbed surfaces in cement mortar (1:4) and finishing the surfaces to match with existing surfaces and finish termination with bottle type copper lugs conduit being laid either in ceiling slab or wall or on surfaces or under the frame of the false ceiling including PVC flexible conduit or through wooden partition including clamping arrangement as required complete all as specified and directed . Note:- Two Run of 6.0 Sqmm cable and one run of 6.0 sqmm earth wire in and including conduit of suitable size shall be measured as one unit.

S&F in repairs MCB SP 6-32 Amps breaking capacity 10 KA 'B' series 240 volts 50 Hz complete all as specified and directed.

S&F in repairs RCBO for earth leakage, overload & short- circuit protection Double pole, 100mA, 40 Amps complete all as specified and directed.

S&F in repairs of MCB TPN 63 Amps breaking capacity 10 KA 'B' series 415 volts 50 Hz complete all as specified and directed.

S&F in replacement and providing new sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one double pole MCB of 20 Amp, 240 Volt complete all as specified and as directed.

S&F in replacement of double door MCB SPN distribution board with steel sheet powder coated DB 4 Ways with 200 amps rated bus bar suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 complete including and making good the disturbed surfaces of walls, floors filling up of holes, plastering, whitewashing/ distempering etc matching to the existing all as specified and directed.

S&F in replacement of double door MCB TPN distribution board with steel sheet powder coated DB 4 Ways with 200 amps rated bus bar suitable for MCB fitted with bus bar neutral link earth bar and din rail single phase 415 volts and neutral confirms to IS 13032- 1991 complete including and making good the disturbed surfaces of walls, floors filling up of holes, plastering, whitewashing/ distempering etc matching to the existing all as specified and directed.

S&F LED street light fitting 70 Watts 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement bracket for street light fitting made out of 25 mm dia GI pipe light grade 1.50 mtr long each bent to required shape & size as directed by Engineer-in-charge and fixed to pole with and including flat iron clamps 02 Nos made out of 32 x 6mm flat iron including GI nuts, bolts & washer and painting of clamps and street light fritting bracket with one coat of red oxide primer, one under coat and one finishing coat with aluminium paint complete all as specified and directed.

Taking down fan (ceiling/ exhaust), sealing cable end, dismantling blades and removing fan and blades, deposited to MES store yard complete all as specified and directed.

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F BEE five star rated exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, frame and louvers and all mounting accessories, including making exhaust vent hole on wall of toilet and suitable length of twin twisted flexible copper wire of size 40/0.0076 Sqmm from ceiling rose to fan connector and all connecting accessories complete all as specified and directed

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retrieved to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessary excavation and earth work including laying the pipe concealed in floor / wall all as per plate No-3 of SSR Part-I complete all as specified and directed and testing on completion (Note:- If the desired resistance is not found earthing shall be re-done by the contractor at no extra cost to Govt) complete all as specified and directed.

Excavating in trenches in soft/ loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying pipes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Excavating in trenches in soft/ disintegrated rock, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for laying pipes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm using soil obtained from excavation complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm using soft/ disintegrated rock obtained from excavation complete all as specified and directed.

Removing excavated soil material from site to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr from the starting point complete all as specified and directed.

Supplying, laying and jointing 100 mm bore high pressure unplasticised PVC pipes of pressure rating 10 kgf/cm2 including UPVC fittings (bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, bushes, reducers and plugs, etc.) in trenches, etc., complete all as specified and directed.

S&F 100 mm dia. cast iron sluice valve heavy duty with steel spindle and bronze gate and seating rings both end flanged and drilled comprising IS 780 of 1984 type PN 1.6 ISI marked including suitable rubber gasket joints, grid packings with suitable nuts and bolts and grouting materials complete all as specified and directed.

S&F 100 mm dia. cast iron non-return butterfly valve flanged, confirming to IS 13095, class PN 1.0 including nuts, bolts, washer and gasket, fixing to CI/ UPVC water supply mains complete all as specified and directed.

M&L for road/ PCC/ chequered tile/ hard surface cutting for laying LT cables or pipes of any size and making good the surface as per existing complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregate) as in foundation, filling mass concrete or similar works, complete all as specified and directed.

M&L for HDPE water tubing, 90 mm dia of pressure rating 10 Kg/ Sqcm with all fittings required such as bends, Tees, elbows, sockets, clamp for fastening equipments etc. inside bore well complete all as specified and directed.

Construction of valve pit chamber of size 120 cm x 120 cm x 90 cm external dimensions with 20 cm wall thickness in brick/ stone masonry construction, including excavation and earthwork in any type of soil, returning, filling in disposal of surplus soil to a distance not exceeding 50 mtr and depositing where directed, PCC (1:2:4) type B2 foundation, including plastering 12 mm thick in cement mortar 1:4 internally finished even and fair and flush pointing externally as the work proceeds in same mortar and suitable size angle frame with mild steel angle iron 40x40x6 mm, MS sheet cover 3.15 mm thick with handle and locking arrangements and painting all steel surfaces with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and painting all the MS embeded in PCC with two coats of black bituminous paint as approved, complete all as specified and directed.

S&F submersible copper conductor cable flat type, multistranded of size 4 Sqmm 3 core , including water tape and RYB insulation tape complete all as specified and directed.

S&F electronics star delta submersible pump controllers with wideband coil capacity 10 HP 3 phase with relay range 14 Amps including connecting with pumpset cable and testing of satisfactory running complete all as specified and directed.

S&F open well submersible pump set water filled type 10 HP, 3 phase, 415 V, with 27-54 mtr head range and discharge 1100 Ltr/ min, including connecting and testing complete all as specified and directed.

S&F MCB TPN 4-Way distribution board single door with steel sheet powder coated DB suitable for MCB fitted with 200 Amps rated busbar neutral link earth bar and din rail single phase 240 volts and neutral confirms to IS 13032- 1991 complete including and making good the disturbed surfaces of walls, floors filling up of holes, plastering, whitewashing/ distempering etc matching to the existing all as specified and directed.

S&F MCB TPN 63 Amps breaking capacity 10 KA 'C' curve 415 volts 50 Hz complete all as specified and directed.

M&L for LT UG cable XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100Volts grade of Size 25 Sqmm, 3.5 core as per IS 7098 (Part 1) 1988 complete all as specified and directed.

M&L for connecting arrangement for HDPE pipe and pump set (one GI hose nipple 80 mm dia bore 200 mm long one end treaded type) and HDPE pipe and NRV/ sluice valve 100 mm size (one GI flange for 100 mm NRV/ sluice valve and one GI hose nipple 100 mm dia one end threaded type 200 mm long welded with flange) including two GI hose clamp screw type and rubber gasket complete all as specified and directed. Note: All T&P and manpower, transportation, welding lowering pipe and motor connection with pipe line, testing of leakage in pipe line etc is deemed to be included in the quoted rate.

M&L for poly propylene rope 20 mm dia, solid braided rope, 5.50 mtr per Kg including all accessories required for tightening in open well/ tube well complete all as specified and directed.

T.P.SUNIL KUMAR (BID ID -3381689)