ARC work of Laying, Testing & Commissioning of 11 kV/22 kV UG XLPE Cable and removing O/H Line of feeders for wire free city work & any others scheme in the jurisdiction of Kathor Sdn & any Others under KIM ind Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

Item Code Description Unit FY 2024-25

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Labour charge for excavation of cable

trench of 400mm width x 1200mm

depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable

trench of 600mm width x 1200mm

depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for excavation of cable

trench of 400mm width x 1500mm

depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For Meter

additional cable 200 mm additional width

shall be considered i.e. half trench length

is to be considered)

Labour charge for laying of 11kV / 22 kV

XLPE Cable of size up to 240 mm2 &

preparation of sand layer 100mm thick, in

the cable trench & covering the cable with

150 mm dia (Inner), thickness

mm, 1.0 meter long RCC half round muffs

and providing and fixing of 4inch width

yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE

BELOW" at 0.75 m depth from ground

surface after laying cable in trench. This

will provide indication that electric cable is

passing underground so as to protect

cable from mechnical injuries, refilling the

same, as per Instruction of Engineer in

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Labour charge for horizontal drilling

using Auger machine without damage to

surface road at max 2.0 mtrs depth &

putting of 6.11 kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-

1987(3rd revision) and BIS certification

and laying of 11KV/22KV XLPE cable of

size up to 240 mm2 in HDPE pipe, as per

5 9925000005 Site Condition (excluding cost of pipe). Meter

The detail map obtained from HDD

machine and excell sheet(hard and soft

copy) indicating the respective depth and

distance from adjacent landmark for each

segment for HDD is must required to be

submitted. HDD to be carried out at depth

1.5 mtrs to 2.0 mtrs as per site conditions

and as per instruction of EIC.

Labour charge for horizontal drilling

manually without damage to surface road

at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm

O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision)

and BIS certification and laying of

11KV/22KV XLPE cable of size up to

6 9925000006 mm2 size, as per Site Condition Meter

(excluding cost of pipe). The detail map

and excell sheet(hard and soft copy)

indicating the respective depth and

distance from adjacent landmark for each

segment of cable to be submitted. Drilling

to be carried out at depth Minimum

mtrs to 2.0 mtrs as per site conditions as

per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green

color, 110mm O.D. , 8.5 mm

thickness H.D.P.E. pipe confirms to IS

7 9925000007 4984 and BIS certification for laying of Meter

underground 11KV / 22KV XLPE

cable up to 240 mm2 size.

Labour work for RCC concreting on

disputed location and repairing of damage

portion of road crossing for the work

carried out for roads crossing as well

as concreting & muffing of

ploes including all materials (1:2:4)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Providing & fixing concrete stone route

marker of 300 mm width x 150 mm thick

x 650 mm height embedded in earth at

least 300 mm below & 350 mm above

ground level respectively at distance

approx 50 meters along the length of

cable. The RCC concreting (1:2:4)(all

necessary maeterials will be in bidder's

scope) of route marker is to be carried out

300 mm width x 150 mm thick x 300 mm

9 9925000009 below ground level as per instruction No.

of EIC. The route marker should be with

name of company with approved yellow

colour-DGVCL. The distance from marker

to cable and cable depth with feeder

name etc., marked with arrow sign is to

be painted on it.The route marker is to be

fixed at location near to any fixed

permanent location (not necessary to fix

exact on top of cable) as per

instruction of EIC.

Erection of D.P. (double pole) structure

using 9 / 11 Mtr. RSJ pole with cable

connection arrangement along with fitting

10 9925000010 of necessary fabrication for 11KV cable No.

including excavation of pit & refilling of

earth as per instruction of EIC. (Exclusive

of concreting & muffing of poles)

Erection of Single pole structure using

9 / 11 Mtr RSJ pole with cable

connection arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling

of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

Erection of D.P. (double pole) structure

using 8.0 Mtr. PSC pole with cable

connection arrangement along with fitting

12 9925000012 of necessary fabrication for 11KV cable No.

including excavation of pit & refilling of

earth as per instruction of EIC. (Exclusive

of concreting & muffing of poles)

Erection of Single pole structure using

8.0 Mtr PSC pole with cable connection

arrangement along with fitting

ofnecessary fabrication for 11KV/22 KV

cable including excavation of pit & refilling

of earth as per instruction of EIC.

(Exclusive of concreting & muffing of

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Labour charge for erecting of 11kV /

kV XLPE cable of size up to 240 mm2 on

14 9925000014 DP Structure with fixing of 02 Nos Per Job

polymer cleats on top and middle

part.Polymer cleats, nut bolts etc. fixing

material to be provided by contractor.

Providing & fixing of 6.11kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification on the

erected DP structure for the mechanical

protection of cable by inserting the cable

inside HDPE pipe. The HDPE pipe shall

15 9925000015 be erected in such a way that 300mm Per Job

shall be below the ground level and the

rest 2700 mm shall be supported on

the DP Structure with 01 No Polymer

cleat.All materials including polymer cleat

and Nut bolt to be provided by contractor.

Providing and fixing of pipe type

earthing from 80 mm dia class-B GI pipe

with pit to be filled with salt & coke and

construction of chamber as per DGVCL

16 9925000016 Drg. No. dg /100 for DP and cable. The No.

earthing pit should be joined with cable by

G.I. strip of size 1” width & 2 mm thick. All

material GI pipe, Coke, Salt etc will be

supplied by bidder.

Supply & fixing of heat shrink type end

terminations (outdoor) for upto

11kV 3C x 185 mm2 size XLPE cable as

per DGVCL technical specification

Supply & fixing of heat & shrinkable end

terminations (outdoor) for upto

kV 3C x 185 mm2 size XLPE cable as

per DGVCL technical specification)

Supply & fixing of heat shrink type end

terminations (indoor) for upto 11kV 3C

x 185 mm2 size XLPE cable as per

DGVCL technical specification)

Supply & fixing of heat & shrinkable end

terminations (indoor) for upto 22 kV 3C

x 185 mm2 size XLPE cable as per

DGVCL technical specification

Supply & fixing of heat

shrinkable straight through joint for

21 9925000021 upto 11kV 3C x 185 mm2 size XLPE No.

cableas per DGVCL technical

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Supply & fixing of heat

shrinkable straight through joint type

22 9925000022 for upto 22kV 3C x 185 mm2 size No.

XLPE cable as per DGVCL technical

Labour charge for excavation of

2100mm long x 1200mm wide x 1200 mm

deep joint pits for installation of 11kV /

22kV Straight through joints as per

23 9925000023 instruction of engineer-in-charge & No.

covering the cable with 150 mm

dia (Outer), thickness 25 mm, 1.0 meter

long RCC half round muffs & refilling

same as per instruction of EIC .

Providing and fixing of insulating bus bar,

made from 11KV/22KV XLPE cable after

removal of semi conducting layer and

applying of PVC heat shrinkable anti-

tracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long

barrel heavy duty up to 240 sq mm lugs,

24 9925000024 Aluminium bus connector. Taping with No.

PG- clamp for bus conductor as per

drawing and as per instruction of EIC. The

Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating

tapes.(11KV/22KV XLPE cable will be in

scope of DGVCL while all other materials

will be in bidder's scope)

Testing of cable at various points and

commissioning the feeder as per

25 9925000025 instruction of engineer-in-charge.Test No.

result shall be submitted by contractor

Preparation and submission of 6 (six)

copies, of complete layout drawings

with GIS mapping as per actual cable

routing showing road crossing, HDPE

pipe sleeving, jointing locations, markers

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Providing and fixing of Sign Board at

junction point Made out of 2 mm

aluminium sheet size 750x300 mm (2.5 x

1ft) rectangle, as per design, pre treated

with phosphate process and acid etching

coated with one coat of epoxy primer and

two coats of best quality paints,

refloctrorised with Hi-Intensity retro –

reflective sheeting as per the latest and

27 9925000027 frame fabricated from suitable size iron No.

angle. The Sign Board is to be fixed on

the base prepared from channel and

bracing angles which is grouted by means

of cement concreting of 1:2:4 for size of

300 mm dia x 800 mm height (500 mm to

be grouted in ground). The details to be

displayed on sign board will be given by

In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board

(Danger Board) on Distribution

Transformer Centers

Made out of 2mm aluminium sheet size

300x300mm (1x1ft) as per design, pre

treated with phosphate process and acid

etching coated with one coat of epoxy

28 9925000028 primer and two coats of best quality No.

paints, refloctrorised with Hi-Intensity

retro-reflective sheeting as per the latest

and frame fabricated from suitable size

iron angle. The Sign Board (Danger

Board is to be fixed at the location as per

instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size

250 mm (L) x 75 mm (W) from 3 mm

aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of

aluminium tag near end termination joint

at DP structure for identifyng the cable.

The details of feeder i.e. 11 / 22 KV with

feeder name shound be punched on the

tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply & fixing of heat shrink type end

terminations (outdoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat & shrinkable end

terminations (outdoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Supply & fixing of heat shrink type end

terminations (indoor) for 11kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification)

Supply & fixing of heat & shrinkable end

terminations (indoor) for 22 kV 3C x

240 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat

shrinkable straight through

34 9925000034 joint for 11kV 3C x 240 mm2 size XLPE No.

cableas per DGVCL technical

Supply & fixing of heat

shrinkable straight through joint type

35 9925000035 for 22kV 3C x 240 mm2 size XLPE cable No.

as per DGVCL technical specification

Installation, Testing and commissioning

of 11 KV,630 A SCADA Compatible, RRL

type- 3 Way RMU including Two

numbers of earthings as per Drawing

(material is in bidder's scope) and as per

DGVCL Technical specification.

Installation, Testing and commissioning

of 11 KV,630 A SCADA

Compatible, RRLL type- 4 Way

37 9925000039 RMU including Two numbers of earthings No.

as per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Installation, Testing and commissioning

of 22KV,630 A SCADA Compatible, RRL

type-3 Way, RMU including Two numbers

of earthings as per Drawing (material is in

bidder's scope) and as per DGVCL

Technical specification.

Installation, Testing and commissioning

of 22KV,630 A SCADA

Compatible, RRLL type-4 Way,

39 9925000041 RMU including Two numbers of earthings No.

as per Drawing (material is in bidder's

scope) and as per DGVCL Technical

Construction of plinth for 11KV, RRL

type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit

40 9925000042 as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 11kv-01.

All required material will be supplied by

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Construction of plinth for 11KV, RRLL

type- 4 Way (i.e Two numbers of Isolator

& Two number of Breaker)Ring Main Unit

41 9925000043 as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 11kv-02.All

required material will be supplied by

Construction of plinth for 22KV, RRL

type- 3 Way (i.e Two numbers of Isolator

& One number of Breaker) Ring Main Unit

42 9925000044 as per DGVCL's technical specification No.

mentioned in drawing no: Drg. 22kv-01.

All required material will be supplied by

Construction of plinth for 22KV, RRLL

type- 4 Way (i.e Two numbers of Isolator

& Two number of Breaker)Ring Main Unit

43 9925000045 as per DGVCL's technical specification No.

mentioned in drawing no:Drg. 22kv-02.All

required material will be supplied by

Modifications e.g.Providing and fixing of

Terminal protectors i.e. Re-use able boot

(HT Side 11/22KV, LT Side 1.1KV)

including 11/22 KV insulating taps and

L.T.(1.1 KV) insulating taps ,Busbar,

Tapping from Bus Bar (11/22 KV XLPE

cable) through P.G. Clamp for H.T.

Jumper to D.O. Fuse to bushings of

Transformer Center, providing & Fixing

of jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating

Tubing (Insulation Level 11/22 KV) in H.T.

jumper , Clamping arrangement of cable

support frame on both side of existing

Over Head type Distribution Transformer

to utilize in Under Ground cable network

as per drawing & as per instruction of

Engineer incharge. All live parts i.e.

PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with

fixinng of 11/22 KV HT insulating tapes. (

11/22 KV XLPE cable will be in scope of

DGVCL while all other materials will be in

bidder's scope ) .

Laying of any size of 11/ 22 KV XLPE

45 9925000047 /PILC Cable in redaymade trench or in

Labour charges for Lying of O/H XLPE

cable pole to pole

Supply of 150 mm dia (Inner), thickness

47 9925000064 25 mm, 1.0 meter long RCC half round No.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0190/06/2026 Approved Date: 06-06-2026

Laying,Testing & commissioning

of Specially designed 11 KV AL-

59 ACS Medium Voltage

Covered conductor as per the

technical specifications (with

Laying,Testing & commissioning

of Specially designed 11 KV

49 55mm2 AAAC Medium Voltage KM

Covered conductor as per the

technical specifications (with

Dismental OF 100MM2

AAAC/MVCC CONDUCTOR

TOTAL ESTIMATED AMOUNT OF

Note :- All Rates are

Excluding of GST.

1. DGVCL will provide key material like M.S. materials,ABC/Bare

conductors,PSC/RSJ Poles,Insulators,Fabricated materials etc. to the

2.All fabricated items shall be fabricated as per DGVCL approved drawing

and by welding rods confirming to the relevent ISI specification and as

directed by Engineer in charge.

3.Necessary electricity connection for fabrictated items shall be provided

by DGVCL on payment of required charge for connection & electricity bill

of the same shall be paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST applicable time to

time. Executive

5.All steel material are to be painted as below: Engineer

(a) Scrubbing of rusted surface properly before applying the paints on to DGVCL

the RSJ poles & steel fabricated materials of RSJ/PSC poles is must Kim Ind Division

(b) Two coats of approved ISI mark red oxide (primer) is to be properly

painted for the RSJ poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles.

5. Qualified bidder has to work UG cable as well as erection &

maintenance (HT, LT & TC) work both as per sub work order given by

File No: DGVCLDOKI/TEN/e-file/6817/2026/2880/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI