Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹16,212
Closing Date
20 Nov 2021, 11:00 amClosed
Executive Engineer
Jal Sahkti Division Indora
Construction of Rain Water Harvesting Structure in Sanjwan Nallah in GP Bhogarwan in Tehsil Indora
2021_HPIPH_53424_1
IND-KNG-03-730
Open Tender
Civil Works
Item Rate
90 days
Indora
Please refer Tender documents.
6 documents required · 6 mandatory
₹250
Yes
₹16,212
Yes
26 Nov 2021
12 Nov 2021
20 Nov 2021
12 Nov 2021
20 Nov 2021
12 Nov 2021
Amount
Excavation in foundation trenches (for Pipes & Pits) upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft /hard rock or chieselling soft /hard rock where blasting is prohibited in all lifts including trimming & dressing of sides leveling of beds to correct grade including shoring/strutting planking, timbering & dewatering wherever required stacking the serviceable and unserviceable material / soil separately and after laying, jointing and testing of pipes, returning the unserviceable soil in trenches in 15cm ( Fifteen centimeter) layers including consolidating of such deposited layer by ramming and watering & then disposing of all surplus excavated soil/ unserviceable material as directed within all leads and lifts including restoration of un-metalled surface to its original condition and including cost of night signals, fixing caution boards, crossing over foundation for access to houses, fencing etc. complete in all respect with in all leads and lifts as per directions of Engineer-in-Charge.
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge.
Providing and laying cement concrete 1:2:4 (1 Cement :2 sand :4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- Foundation, footing bases of column, wall etc. and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charges.
Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:-
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge.
Providing tor steel reinforcement for reinforced concrete work including bending, binding, & placing in position complete upto floor two level) within all leads and lifts as per direction of Engineer-in-charge.
Providing and fixing cast iron Sluice Valves Kartar Make for water works purpose PN 1.60 variety: PD,( with hand wheel) complete as per IS : 780-1984 class of following diametre including brass spindle and as per IS : 2906 class-II with welding of M.S. flanges, nuts, bolts, rubber insertion etc. within all leads and lifts as per the direction of Engineer-in- Charge.
250mm dia
Providing, laying, jointing and testing of 250 mm dia MSERW pipe (Zinc coated) plane ended pipe with conforming to ISO:3183-2007, steel grade L-210 (latest with up to date amendments) having 4.80 mm wall thickness and capable of withstanding required test pressure in random length of 4 to 7 meters including manufacturing / fabrication of reducer, tapers, tees, all short pieces per site requirement made from parental tubes which shall included all operational such as cutting, welding, jointing, lowering and laying of pipe in excavated trenches to ensure required level complete in all respects to the entire satisfaction of Engineer-in-charge. The pipes shall be factory galvanized (Zinc coated both inside and outside) as per relevant IS standard including entire carriage of material flushing, cleaning and hydraulic testing in all respect to the best satisfaction of Engineer-in-charge within all leads and lifts. (The flange provide every pipe)
250mm dia, wall thicknes 4.80mm, outer dia 219.10mm, flange Table-5, weight of pipe 31.748Kgs.
MS NITIN CONSTRUCTION BHAPOO
vikram pathania
Sarbjit Singh Katoch
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .