Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC AGREEMENT EXECUTED | |
| 2 | L2₹18.0 L+₹72,148.89 (4.17%)Accepted-AOC | L2 | Accepted-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L5 | |
| 4 | Rejected-Technical | - | Rejected-Technical L6 | |
| 5 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | KRISHNAKUMAR L1 | MUHHAMMED IQBAL I L3 | HARI SHANKAR L5 | RAJESH A BHASKAR L4 | JITHIN JOHN L6 | Panayam Civil Construction Labour Contract Co operative Society L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00School Maintenance | |||||||||
| 1.00 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 358.09 | sqm | 473.65 ₹1,69,609.33 Lowest | 509.59 ₹1,82,479.08 | 535 ₹1,91,578.15 | 592 ₹2,11,989.28 | 550 ₹1,96,949.5 | 493.36 ₹1,76,667.28 |
| 1.00 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 1,420.74 | sqm | 16.73 ₹23,768.98 Lowest | 18 ₹25,573.32 | 18 ₹25,573.32 | 18 ₹25,573.32 | 20 ₹28,414.8 | 17.43 ₹24,763.5 |
| 1.00 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 1,454.99 | sqm | 93.09 ₹1,35,445.02 Lowest | 100.15 ₹1,45,717.25 | 105 ₹1,52,773.95 | 95 ₹1,38,224.05 | 110 ₹1,60,048.9 | 96.96 ₹1,41,075.83 |
| 1.00 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 126.72 | sqm | 88.69 ₹11,238.8 Lowest | 95.42 ₹12,091.62 | 100 ₹12,672 | 94 ₹11,911.68 | 105 ₹13,305.6 | 92.38 ₹11,706.39 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 3,901.38 | kg | 158.72 ₹6,19,227.03 | 170.76 ₹6,66,199.65 | 180 ₹7,02,248.4 | 150 ₹5,85,207 Lowest | 185 ₹7,21,755.3 | 165.32 ₹6,44,976.14 |
| 1.01 | OD286169/2025-2026:Providing and fixing 0.35m thick Trafford Alu Zinc sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required | 340.8 | sqm | 473.39 ₹1,61,331.31 Lowest | 509.32 ₹1,73,576.26 | 535 ₹1,82,328 | 580 ₹1,97,664 | 575 ₹1,95,960 | 493.09 ₹1,68,045.07 |
| 1.01 | OD247758/2025-2026:Providing and fixing PVC rain water gutter semi circular section 200MM dia of 6 kgf PVC pipe including fitting with 32*5mm flat supporting at 1m intervals complete as per direction of engineer in charge at site. | 60 | metre | 409.73 ₹24,583.8 Lowest | 440.82 ₹26,449.2 | 463 ₹27,780 | 589 ₹35,340 | 500 ₹30,000 | 426.78 ₹25,606.8 |
| 1.01 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 32 | metre | 769.25 ₹24,616 Lowest | 827.62 ₹26,483.84 | 869 ₹27,808 | 835 ₹26,720 | 940 ₹30,080 | 801.26 ₹25,640.32 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 366.75 | sqm | 134.69 ₹49,397.42 Lowest | 144.91 ₹53,145.6 | 152 ₹55,745.85 | 165 ₹60,513.59 | 160 ₹58,679.84 | 140.3 ₹51,454.88 |
Tender Value
₹21.2 L
EMD Value
₹50,000
Closing Date
29 Sept 2025, 6:00 pmClosed
SE, Kollam municipal corporation
SE, Kollam municipal corporation
Project no.1320/25 SZ Renovation of Vallikkeezhu HSS
2025_LSGD_800077_32
PC4/16546/25
Open Tender
Civil Works - Buildings
Item Rate
180 days
Kollam Municipla Corporation
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹50,000
Yes
9 Jan 2026
22 Sept 2025
30 Sept 2025
22 Sept 2025
29 Sept 2025
22 Sept 2025
22 Sept 2025 - 29 Sept 2025
Amount
School Maintenance
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD286169/2025-2026:Providing and fixing 0.35m thick Trafford Alu Zinc sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required
OD247758/2025-2026:Providing and fixing PVC rain water gutter semi circular section 200MM dia of 6 kgf PVC pipe including fitting with 32*5mm flat supporting at 1m intervals complete as per direction of engineer in charge at site.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall
50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade
OD286050/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stone chips filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
Panayam Civil Construction Labour Contract Co operative Society (BID ID -2358288)
MUHHAMMED IQBAL I (BID ID -2364743)
RAJESH A BHASKAR (BID ID -2364041)
HARI SHANKAR (BID ID -2364236)
JITHIN JOHN (BID ID -2365598)
Bidder Name
MUHHAMMED IQBAL I
Panayam Civil Construction Labour Contract Co operative Society
JITHIN JOHN
RAJESH A BHASKAR
KRISHNAKUMAR
HARI SHANKAR
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1328012.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .