PROVN OF 01 X SPORTS ROOM AND 01 X VISITOR ROOM NEAR RHQ IN ARMY AREA JODHPUR UNDER GE (A) NO.01

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in soft/loose soil complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

Returning filling in including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance exc. 250 mtr but not exceeding 500 mtr complete all as specified and as directed.

Removal of surplus loose soil from excavated place and deposting at safe side distance not more than 50 meter from excavated place complete all as specified and as directed.

M&L squared rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

Spreading and levelling in layers n.exc 25cm thick including wall ramming complete all as specified and as directed.

M&L hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 40mm thick, PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in damp proof course to horizontal or vertical surfaces including mixing with WPC and necessary form work complete all as specified and as directed.NOTE :- WPC shall be measured and paid separately under respective item.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate for sub base as in floor complete all as specified and as directed .

Extra over stone walling for hammer dressing to face granite or trap stones with maximum depression on face from a straight edge held against the dressed surface not exceeding 20mm and dressing face beds and joints as specified of squared rubble walling un-coursed or brought upto or regular courses complete all as specified and as directed .

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm but n.exc 20cm girth complete all as specified and as directed.

M&L plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof kerbs rounded or chamfered on edges complete all as specified & directed.

M&L plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping to parapet walls including necessary form work complete all as specified & directed.

Supply only water proofing compound complete all as specified & directed by Engineer-in-Charge

M&L for mild steel framed brackets for cooler stand made out of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified & directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball brass valve, 20 mm dia, high pressure, with polythene float and fly nut all as specified and as directed.

S&F Rotational moulded polythene water storage tanks (cylinderically vertical with closed top) hoisted and fixed in postion all as specified cap 1000 ltr complete all as specified and as directed by Engr-in-Charge.

M&L keyed pointing in cement mortar (1:3) to square rubble masonry regular coursed Jodhpur type complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick in cement mortar1:6 on stone masonry surfaces or other than fair face of brick work finished even and face without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar1:4 on stone masonry surfaces finished fair and even with out using extra cement including mixing with water proofing compound ( WPC) as per manufacturer instructions complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces of ceiling /facia /chajja etc, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed .

M&L 25mm thick (average) PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate, as in sub floor, the surface of concrete is to be finished even and rough to receive floor finish, with out using extra cement complete all as specified and as directed.

M & L joint free coloured glazed ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

M&L non skid joint free ceramic tiles, coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L for vitrified tiles of light shade, 10mm thick (minimum) (size, shape & shade as approved by GE) polished area of each tiles equal to or not exceeding 0.36 Sqm in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15 mm thick skreed bed in CM 1:4, complete all as specified and as directed.

All as per Sl. Item No. 31.00 here-in-above, but as in skirting over and including 10 mm thick backing coat in CM 1:4

M&L for 18 to 20 mm thick machine cut kota stone slas flooring, as in cooking plateform / trade of steps (single piece) over 20cm thick screed bed in CM 1:6 & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing, complete all as specified and directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms, slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc complete all as specified and directed.

M&L for rounding of the edges of stone slabs as in cooking platforms, treads of steps shelves & cills etc complete all as specified and directed by Engr-in-Charge.

M&L for 50 mm thick Cement concrete type C1 -1:3:6 using 20mm graded stone agg as in plinth protection & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

S&F 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

S&F 25 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete complete all as specified and directed.

S&F PVC connections 450mm long, 15mm bore with brass fly and washers on both ends complete all as specified and as directed.

S&F PVC connections 600mm long, 15mm bore with brass fly and washers on both ends complete all as specified and as directed.

S&F CP brass any type soap dish fixed to plugs with CP brass screws complete all as specified and as directed.

S & F CP brass wall mixer 3 in 1, including telephonic shower with 1.50 mtr long tube & 150 X 150 mm over head shower with 300 mm long arm, connecting legs and wall flanges but with crutch and telephone shower complete all as specified and as directed.

S & F CP brass over head shower rose ABS body CP with grey face plate and with arm having swivel joint 150X150mm square shape jointing to pipe complete all as specified and as directed.

S & F CP Health faucet with 1.2m long 80mm dia SS flexible tube with wall hook complete all as specified and as directed by Engr-in-Charge.

S&F two way angle bib cock cromium plated fancy type 15 mm bore /size complete all as specified and as directed.

S&F Chromium plated brass bib tap fancy type 15mm size, ISI marked.

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S & F Toilet paper holder of vitreous china fixed to wall with CP brass screws complete all as specified and directed by Engr-in-Charge.

S & F chromium plated brass stop valve 15mm ISI marked, high pressure, both and screwed complete all as specified and directed by Engr-in-Charge.

S&F MS chromium plated peg set of set of five fixing with wall, complete all as specifed and directed.

S & F brass chromium plated swivel joint shower rose of size 100mm dia fixing with 15mm pipe (minimum weight 40gm) with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and as directed by Engr-in-Charge.

S&F pillar taps, brass chromium plated fancy type , with capstan heads, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed .

S&F brass chromium plated fancy type Angular stop valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore pipe complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation of new plastered surfaces of walls and writing letters or figures with (Block, roman, italic or Indian) not exc 30cm high of suitable width as required at site with two coats of flourescent paint complete all as specified and as directed .

S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. and directed.

S&F brass chromium plated fancy type tubular towel rail, 20mm dia, D Type, 600 mm long between flanges including brackets complete all as specified and as directed.

S & F spun cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

All as per Sl. Item No. 57.00 here-in-above, but fixed to wall with MS clamp

All as per Sl. Item No. 57.00 here-in-above, but 100 mm bore pipe

All as per Sl. Item No. 58.00 here-in-above, but fixed to wall with MS clamp

S&F 100mm dia CI bends including cutting of holes.

S&F 100mm dia CI connector of length 30 cms including cutting of holes with lead joints

S&F CI single branch piece 100mm dia.

S&F CI double branch piece 100mm dia.

S&F 75mm dia CI bends including cutting of holes.

S&F CI single branch piece 75mm dia.

S&F CI double branch piece 75 mm dia.

S&F cast iron floor trap 100mm dia out let, with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

All as per Sl. Item No. 68.00 here-in-above, but suitable for nahani trap

S & F stainless steel decorative type curtain rods of 25mm dia, with best quality knob & bracket including 8 nos PVC rings per running meter of curtain rod complete all as specified and directed.

S&F Factory made box type steel windows ( glazed) with side hung shutters including pintle hinges with 2 nos 150mm MS barrel tower bolt and steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including single shop coat of Zinc chromate primer (with or without cooler opening) all as specified and as directed.

All as per Sl. Item No. 71.00 here-in-above, but without glazing bar

S&F Factory made box type steel ventilators with top hung shutters including pintle hinges with MS barrel tower bolt and steel handle and steel peg stay complete with glazing bars, dovetailed or welded, including single shop coat of Zinc chromate primer, complete all as specified and as directed.

All as per Sl. Item No. 73.00 here-in-above, but without glazing bar

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L factory Made flush shutters, 35 mm thick solid core with block board core, commercial type both sides, construction as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications and as directed .

S&F for 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F Butt hinges,100mm size, cold rolled mild steel, medium weight, complete all as specified and as directed.

S&F for 100mm size, butt hinges, stainless steel including necessary welding if required complete all as specified and as directed.

S & F floor door stopper of size 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F 125 mm size single action floor spring bright finished body of mild steel with steel wire spring heavy duty complete all as specified and as directed by Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M&L for Figured glass 4.00 mm thick , pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and apply two coats of synthetic enamel paint over & including M&L one coat of red oxide zinc chrome primer complete all as specified & directed

M&L preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over & including M&L a coat of pink primer complete all as specified & directed

M&L machine pressed precast concrete interlocking paver block, M-35 Grade, 60 mm thick with 6 mm thick anti abrasive rubberised topping layer, any shape and size confirming to IS 15658-2006, with grey cement and pigments, over and including sand cushioning of 25mm thick, complete all as specified and as directed.

M&L precast cement concrete (1:3:6) type C-1using 20mm graded crushed stone aggregate as in kerb stone or mud steps, rounded or chamfered on edge, fixing of holdfast etc complete all as specified & directed by Engineer-in-charge.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in precast manhole/drain covers including demolition of RCC slab, manhole/drain cover in any position complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 by using 40 mm graded crused stone aggregate as in bed to 150 mm bore drain pipe including packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed .

S & F 150 mm bore reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete all as specified and as directed .

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.

RCC M-25 design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M&L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed complete laid in trench complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, including ccutting, chasing, pinning in & making good to disturbed portion, complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

M&L for screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 2.00mm having weight not less than 2.25 Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen confirming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. NOTE :- WPC shall be measured and paid separately under respective item.

S&F 12 mm thick PVC laminated gypsum board false ceiling size 595x595mm of relevant IS with powder coated aluminium snap grid of size (600 x 600 mm) by fixing of hanger 6 mm dia GI ( up to 2000 mm length) adjusting level fix to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long complete all as spacified

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in surface channels and drains

M&L for 15 mm thick rendering in CM 1:3 over stone masonry surfaces & finishing even & smooth using extra cement.

S&F light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.

M&L for applying 2 coats of Oil Bound distemper over two coat of birla/jk putty to new plastered surface to remove all depressions etc incl sand papering the surfaces & obtain a smooth surfaces complete all as specifed. The OBD shall be in one or more colours/ shades all as directed by Engg-in-charge.

M&L for prep of new surfaces & applying on wall plastered/unplastered two coats of cement base paint over coat over a coat of primer complete all as specified.

S& F PP - R Ball valve of size 20 mm dia (brass insert) complete all as directed

M & L Cutting existing steel tubing for alterations or additions (Each cut measured) of size upto 80 mm dia including inserting of Tee of required size for new connection all as directed.

M & L for road cutting(not more than 3.5 mtr in width of road) and excavation upto 60 cm below ground level and laying of GI pipe of any grade and make good distrubuted suface by PCC 1:4:8 (nominal mix), type D-2, using 40mm graded crushed stone aggregate complete all as directed

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 16 sqmm 2 core all as diredted by Engr - in - charge. Note : Earth work and brick work measured and paid separately

Supply and laying Un reinforced Precast concrete cable cover, flat size 300 mm x 180 mm x 40mm all as directed

Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured.

Supply and fix GI tubing medium grade of 40 mm dia for cable protection.

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans, suitable for One light/fan point controlled by one, one way switch, etc at one end and to common earth dolly at other end, all as specified, directed . The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge.

All as per serial item No. 124.00 here-in-above but suitable for one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

All as per serial item No. 124.00 here-in-above but suitable for one socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per serial item No. 124.00 here-in-above but with4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Switch piano type, single pole, one way, 6 amps, 230 volts, complete all as specified and directed.

S&F Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F Switch piano type, single pole, one way, 16 amps, 230 volts, complete all as specified and directed.

S&F Socket, 6 pin, 6/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F LED lamp 9W complete all as specified and directed by the Engineer-in-Charge.

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed.

S&F bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge.

S & F Wall fan 3 blade 400 mm sweep with speed control regulator position complete all as directed by Engr - in - Charge.

S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge.

S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed

S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Supply and fixing as MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 5 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete )

S&F electric storage water heater of capacity 25 litres BEE 5 star rated including proper installing arrangment on wall surface with suitable Anchor bolt fatser and Geyser connections for hot and cold water supply made of stainless steel wire braided connrtector with chrome finish heavy duty nuts of 15mm size with suitable lengh etc complete all as directed by Engineer-in-Charge.

Supply and install desert cooler electric driven (single phase) three speed having nominal air flow capacity 5000 CFM per hour, with propeller ISI cooler fan motor copper winding single phase fitted with / having aluminium blade of minimum size 500 mm ,submersible pump, Max power consumption of 325 Watts. Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG, having capacity 40 Ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction all as directed by Engr-in-Charge and of standard make as approved by GE” NOTE : 1. Three speed switch ISI Marked rotary type for propeller fan and one way switch pump with separate control. The switches shall have marking off- Low - medium and high. 2. float valve on water supply connection shall be deemed to be included in unit rate quoted

M&L for stand, flush to wall for desert cooler, fabricated out of MS angle iron 40mm x 40mm x 06mm, 1.2 meter long bend to shape as top size 600mm x 600mm, duly welded with two members to tie vertical support, including painting two coats of synthetic enamelled paint over a coat of red oxide primer including M&L for steel rack bolts/ fastners, 100mm long, 12mm dia - 4 Nos for fixing stand, all as directed.

GANGADHAN ENTERPRISES (BID ID -3194032)

Nikhat nirman (BID ID -3191822)