Maintenance of Fishery Officer Office and Central Store, Wash room under Supdt. of Fisheries, Mohanpur Sub-Division

Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622- 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. all complete as per direction of the Engineer-in-charge.. Soluble Salt Stainfree vitrified tiles (Glossy) Size of tile 600 mm x 600 mm

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 40 mm nominal size)

Clearing jungle including uprooting of rank vegetation, grass, brushwood, treesandsaplingsofgirthupto30cm measured at a height of 1mabove ground level and removal of rubbishuptoadistanceof 50moutside the periphery of the area cleared.

ProvidingandfixingPrecastchequeredcementconcrete tiles18mmthick, laid in footpath&courtyard, on20 mmthickbedof cementmortar1:4(1cement :4fine sand) jointedwithneatcementslurryincludingrubbing and cleaning etc. all complete as per direction of Engineer-in-charge. In dark shade using ordinary cement

Providingwoodwork in framesof doors,windows, clerestorywindowsandotherframes,wroughtframed and fixed in position : Local Teak Wood

Providingandfixingpanelled/orpanelledandglazed shutters fordoors,windowsandclerestorywindows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excludingpanellingandorglazing,whichwillbepaid forseparatelybutincludingthewoodenbeadingof20 ×12mmfor fixingpanellingandor glazingasper direction of Engineer-In-Charge. 35 mm thick shutters

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.