conversion of different damaged 11 KV AB cable XLPE lines to ACSR Rabbit

Amount

SUPPLY

Supply of Earth wire STP SP-23 pole WNB

Supply of PP & clamp for ST pole SP-23 WNB

Supply of LT shackle clamp SP-23 WNB

Supply of Bracing top clamp SP-23 WNB

Supply of Bracing bottom clamp SP-23 WNB

Supply of Stay clamp S/E SP-23 WNB

Supply of Stay clamp D/E SP 23 WNB

LABOUR CHARGE

Cartage of material from store centre Almora /Haldwani to Construction site including loading-unloading a both point and proper stacking .(Avg. distance 110 Km.) (a)STP SP-23 Pole

Cartage of material from store centre Almora /Haldwani to Construction site including loading-unloading a both point and proper stacking .(Avg. distance 110 Km.)(b)Small material

Head load cartage of following materials from dump store to work site (Avg. distance 0.20 Km.)(a)STP SP-23 Pole

Head load cartage of following materials from dump store to work site (Avg. distance 0.20 Km.)(b) Cartage of Small material

Febrication of Top channel / Side V -Cross arm / Guarding angle as per specification

Excavation of earth for STP SP-23 pole pit of size 0.9 * 0.6 * 1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and raming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work. (0.9*0.6*1/6*8.5= 0.765 Cum per pole)

Erection of STP SP-23 Support Poles in proper level and alignment alongwith fixing of all accessories ,like top channel & clamp as per RESPO construction manual.

Grouting of pole in size 0.45*0.45**1/9 of the Support in CC ratio 1:4:8 block includuing cost of Cement ,sand stone ballast back filling of soil and boulders in pit and ramming and proper alignmebt ,leveling as per RESPO construction manual. (0.45* 0.45 *1/9*8.5=0.191 Cum per pole )

Muffing of poles size 0.45*0.60 cm radius with CC1:3:6 block and 45 cm height from ground level including cost of ballast ,cement and sand etc.

Excavation of earth for Stay pit of size 0.60*0.60*1.20 mtr in all type of soil including proper dressing of sides and raming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work. (0.6*0.6*1.20 Cum =0.432 Cum / pole )

Fixing , tightening and nozzling of stay with pole and stay rod on required tension as drawing /RESPO manual.

Grouting of Stay in size 0.60*0.60*0.30 in CC ratio 1:4:8 block includuing cost of Cement ,sand stone ballast back filling of soil and boulders in pit and ramming and proper alignmebt ,leveling as per RESPO construction manual. (0.6*0.6*0.3 Cum= 0.108 Cum per pole)

Instalation of Top Channel , V-cross arm , clamps , insulators etc on old STP SP-23 pole complete as reqired.

Guarding of road crossing

T- off Conection complete of 11 KV line

Laying , spreading ,stringing and sagging of 3 Phase Rabit conductor and Weasel earth wire complete with binding and jumpering as per RESPO Spec.

Dismounting of 100 KVA DTR due to low clearence & HT bushing on front side at road side .

Re-mounting of 100 KVA DTR on proper clerance height and move the HT Buhing , TPMO ,Fuse set etc accessories rear side from Road .

Loping of Tree Branch

Welding of Rotten SP-55 / SP-33 / SP-23 Pole at Market area icluding Generator ,Welding machine , Iron - Steel Bar and and Grouting the pole below surface 0.4 mtr & Muffing of the pole Minimum 0.4o mtr above the surface or upto the Welded area completely

BALAM SINGH MEHRA

J D M ENTERPRISES