Extension Works

Amount

SUPPLY

Supply of 11 mtrs. length of STEEL Pole at any kind of soil upto a depth of 1/6th of pole height, inc.exavation of earth refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Supply of 9.0 mtrs length of P.C.C Pole at any kind of soil upto a depth of 1/6th of pole height, inc.exavation of earth refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Supply of Stay Set direct in earth complete with 19 mmx 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm, thimple, turn buckle 7/3.15 mm dia GI stranded stay wire and strain insulator etc. with supply of MS clamp, Nuts & Bolts etc. as required and making complete in all respect.

Supply of Stay Insulator (HT)

Supply of G.I. Stay Wire (7/2.5mm)

Supply of Stay Clamp

Supply of 75x40x40x6 mm M.S. Channel

Supply of M.S. Angle (65x65x6 mm)

Supply & Erection of 11 KV Polymaric Pin Insulator

Supply of 11 KV Polymaric disc insulator with fittings, nuts & bolts, washers etc. as reqd. as per direction of Engineer-in-charge.

Supply 11 KV Disc fittings(6/1/2.59 & 6/1/3.35)

Supply Laying & stringing of 1 Km (single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting & binding etc. complete as required.

Supply of 9 KV, 5 KN single pole metel oxide gapless type LA, inc. necessary connection complete as per technical specification

Supply of 11 KV DOF unit set of three nos inc. necessary connection complete as per technical specification (Excluding the cost of back clamp, nuts & bolts)

Supply of 11 KV 200 Amp GOS unit set of three nos inc. necessary connection complete as per technical specification (Excluding the cost of back clamp, nuts & bolts)

Supply & Erection of 125 mm. dia. TATA/JINDAL/ BANSAL make best quality G.I. pipe as per IS:1239 of different length by all terrain horizontal direction driling/drigging manually across the road crossing without effectiong the existiong road surface at a depth of minimum 1100mm or as per site requirement

Supply of febricated clamps of assorted size of MS flat (50x6) with double coat of red oxide prime coating.

Supply of MS Nuts & Bolts in/c washer of assorted size ISI mark machine made

Supply of G.I pipe 2.5 mt. Long & 40 mm. dia. TATA/JINDAL make

Supply of 60 Kg Salt and 55 Kg Charcoal (For 1 Pit).

High density Polithene Pipe half inch. Dia

300 Amps Cutout

Bi-matallic Lugs 185 sqmm

185 Sqmm PVC Cable

11 KV XLPE insulated 70 sqmm cable

Supply of 11 KV Danger Board.

ERECTION

Erection of 11 mtrs. length of STEEL Pole at any kind of soil upto a depth of 1/6th of pole height, inc.exavation of earth refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of 9.0 mtrs length of P.C.C Pole at any kind of soil upto a depth of 1/6th of pole height, inc.exavation of earth refilling the pit with soil upto the ground level, ramming and making complete in all respect.

Erection of Stay Set direct in earth complete with 19 mmx 1800 mm long stay rod, anchor plate of size 300 x 300 x 8 mm, thimple, turn buckle 7/3.15 mm dia GI stranded stay wire and strain insulator etc. with supply of MS clamp, Nuts & Bolts etc. as required and making complete in all respect.

Erection of MS channel cross arm 1.3 to 2.8 mtr long 75x40x40x6 mm (excluding the cost of back clamp, nuts & bolts) 2.2 mtr long MS channel is require for D/P Bkt & Tapping.

Erection of 1.0 to 2.5 mtr long 65x65x6 mm M.s. angle cross arm . (excluding the cost of back clamp, nuts & bolts) 2.5 mtr long MS angle is require.

Erection of MS channel cross arm exceeding 0.6 to 2.8 mtr long 75x40x40x6 mm (excluding the cost of back clamp, nuts & bolts) 2.8 mtr long MS channel is require.

Erection of 11 KV Polymaric Pin Insulator

Erection of 11 KV Polymaric disc insulator with fittings, nuts & bolts, washers etc. as reqd. as per direction of Engineer-in-charge.

Erection 11 KV Disc fittings(6/1/2.59 & 6/1/3.35)

Laying & stringing of 1 Km (single Conductor) ACSR 6/1/2.59 mm dia WEASEL including hoisting & binding etc. complete as required.

Erection of 9 KV, 5 KN single pole metel oxide gapless type LA, inc. necessary connection complete as per technical specification

Erection of 11 KV DOF unit set of three nos inc. necessary connection complete as per technical specification (Excluding the cost of back clamp, nuts & bolts)

Erection of 11 KV 200 Amp GOS unit set of three nos inc. necessary connection complete as per technical specification (Excluding the cost of back clamp, nuts & bolts)

Earthing for hard with GI pipe 2.5 mtr Long and 40 mm dia, inc. excavation, refilling with alternate layer of salt & charcoal as per drawing (excluding supply of GI wire, nuts & bolts, etc. as required)

Installation and Positioning of 11/.430 KV, 200 KVA 3 phase DT on pole with necessary connections and fitting fixing of all allied accessories components as required for making complete in all respect for energizing.

Erection T-shaped Pillar for Cable line ID marking with caption “11 KV U. G. Line” (made of pre-cast RCC) of size(Pillar-3ft.x0.33ft.x0.33ft and T-Section- 1ft.x0.33ft.x0.33ft) (Rate in/c Hospital dedicatated feeder)

Fabrication of cross arms and ciamps by MS Angle/ MS Channel/ MS Flat as per specication. i) MS Angle 65x65x6 mm

ii) MS Channel 75x40x40x6 mm

Erection of 2 way (1 incoming & out going feeder) HT Kiosk / 11 KV outdoor type feeder pillar made of 10 SWG MS Sheet complete with aliminium bas bar , HT insulator etc as reqd. provided with locking system & painting , to be fitted on structure of MS angle ( 50x50x6 mm) & MS Flat ( 40x40x6 mm) in/c supply of MS angle & flat as reqd., concreting of ration 1:2:4 with excavation of earth,centering ,shuttering & disposal of excess soil.

Laying of one number PVC insulated and PVC sheated/XPLE power cable of 11 kv grade of following size direct in ground including exacation sand cushioning, protective covering and refilling the trence etc as required.(Trench Size; Widht-350mm, Height-1200mm/sand(couchioning); Height -250mm, Widht-350mm/Protection:Double Layer Bricks, above 120 sq mm to 400 sqmm

Manually Digging/Drilling horizontally or diagonnaly direction for Road crossin /Water Supply line/Telecommunication line / Gas Pipe line etc. including laying of 64 to 200 mm dia GI pipe direct into the earth at a of depth minimum 1100 mm below the ground surface with out effecting the existing Road including excavation earth for entry pit as per site condition and direction of engineering in Charge.

Erection of 11 KV Danger Board.

Supply and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories in/c lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: upto 150 sqmm ( Rate as per new w/s - 2020 item UGD153)

Grouting with CC of Ratio 1:2:4(1 Cement(Cement Concrete, A= 600 x600 x630 -(3.14x(165/2)Sqx630)=220108443.8Sqmm, B=3.14x(420/2)Sqx457-(3.14x(165/2)Sqx457)=53516785.38Sqmm, A+B =273624229.2Sqmm=0.273 Cum)):2 Rover Sand: 4 Jhama Brick Aggregate of 20 mm, normal Size) including supply of Cement sand and brick aggregate complete with excavation, refilling of earth ramming alongwith centering shuttering as required @ 0.273 cum per Steel Tubuler Pole as per TSECL Specification etc. and applying paints with ready mixed primer(Two or more coats) and alluminium paint of approved quality to give an even shade etc, as required as per direction pf Engg-In-Charge.

Grouting of stay set with CC of ratio 1 :2:4 (1 cement: 2 river sand: 4 jhama brick aggregate of 20 mm. nominal size) ilc supply of cement, sand and brick aggregate complete with excavation, refilling of earth, ramming alongwith centering and shutterirtg as required.( @ 0.119 Cum per stay set as per TSECL specification)

Construction of 2x 200 KVA RCC Transformer with 6 Nos column) Earth work in excavation by mechanical means ( Hydraulic excavator ) / manul means in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming,consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Filling available excavated earth (excluding rock) in trenches,plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring andshuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto floor five level. i) Mild steel and Medium\ Tensile steel bars.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level: 1:1 1/2 :3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and rinforcement- i) In plinth and skirting courses, fillets columns, pillars, posts and struts: 1:1 1/2 :3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- B)RCC work in beams, lintels, bands, plain window sills,staircases and spiral staircases excluding precast spiral staircase: 1:1 1/2 :3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

A)RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas: 1:1 1/2 :3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size)

Centering shuttering including struttings, propping etc.and removal of form work for: i)Foundations, footings, bases for columns etc.

ii)Columns, Pillars, Piers, Abutments, Posts and Struts

iii)Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply

iv) Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply

First class brick work in foundation and plinth including cost of all materials as required complete: i)In cement mortar 1 : 4 ( 1 cement : 4 fine sand )

12 mm cement plaster of mix: i)Cement mortar 1 : 6 ( 1 cement : 6 fine sand )

Neat cement punning.

Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.

Providing and fixing hard drawn steel wire fabric 75 x25 mm mesh of weight not less than 7.75 kg per sqm to window frames etc. including 62 x 19 mm beading of Garamir wood.

Providing and fixing ISI marked oxidised M.S sliding door bolts with nuts and screws etc. complete i) 300 x 16 mm

Painting with synthetic enamel paint, having VOC ( Volatile Organic Compound) content less than 150 grams / litre,of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [ Payment shall be made after submission of Test Certificate issued by the Manufacturer ] i) two coats on new work to give an even shade.

Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.84 kg/10 sqm) complete.[ Payment shall be made after submission of Test Certificate issued by the Manufacturer ]

UTTAM NAG

RATAN PAUL