Provn of 06 No WCs and 04 No bath rooms near SP coy of 12 Garh Rif, Coy Mob store shed, coy office and Training shed near bldg No T-25 and 26 of 4/4 GR, Jafari wall and 04 No gates in single officers accn of 501 FSEG and Chajja in bldg No-P-91 and Pa

Amount

Surface excavation n exc 30cm deep averaging 15cm deep in any type of soil and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in any type of soil, getting out and removing surplus soil to a distanc n exe 50 m and making good the surface complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc, or for shafts, wells, cesspits manholes, pier holes etc. n exc 10 Sqm on plan and n exc. 1.5 mtr in depth and getting out in any type of soil complete all as specified.

M&L for Treating the backfill in contact with foundation with anti termite emulsion at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as spcified

M&L for anti termite treatment treading the top surface of filled earth at the rate of 5 ltr of emulsion per square mtr of surface complete all as specified and directed.

M&L for anti termite treatment treading the soil under plinth protection at the rate of 5 ltr of emulsion per square mtr of surface area complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling / mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for brick work with subclass 'B' bricks, , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified. (using old size bricks)

M&L for brick work, straight or curved on plan to any radius and built in cement mortar (1:4) as in half brick thick (using old size brick) wall complete all as specified and directed.

M &L 15 mm thick rendering in cement mortar (1:6) in two layers(10-12 & 5-3 mm thick) on fair faces of brick work and finished even and smooth without using extra cement complete all as specified and directed. (WPC will be measured and paid separately if required)

M &L 15 mm thick rendering in cement mortar (1:4) in two layers(10-12 & 5-3 mm thick) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

M&L for preparation of newely plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered / unplastered surfaces of wall and applying wall putty 2-3 mm thick and rubbing with sand paper to make the surface smooth and then applying two coat of oil bound distemper over a coat of suitable primer,complete all as specified and directed.

S&F M S work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality complete all as specified and directed.

M&L for preparation of newely plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Pre-painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick, of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-painted Galvalume aluminum zinc coating GI based profile ridge line, 0.50 mm thick of suitable colour having tensile strength of 550 Mpa as in ridge etc, fixed with self tapping screws, suitable for corrugated pre painted GI based roof steel sheet complete all as sepcfied.

Providing and fixing tiled false ceiling of Everest Designer tile lvory plainted (High pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595mm and any one of the design (cascade of electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm, both side inclusive and black painted groove on all T webs) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30mm sheet, 1200mm long spaced between main "T" at 600mm c/c to from a grid of 1200 x 600 mm and secondary cross "T" of length 600mm and size 15 x 32 mm made of 0.30mm thick sheet to be interolcked at middle of

Item No 20.00 contd......the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, rquired cutting/ making opening for services like diffusers, grills light fittings, fixtures smoke detectors etc. Main "T" runners to be suspended from ceiling using CI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adustable rods of 3 mm dia with galvanized butterfly level clips or with 3 mm dia GI wire, spaced at 1200mm c/c along main "T" bottom exposed width of 15mm of all T Section shall b pre painted with polyster paint and black painted groove at center or size 4mm depth and 4mm all complete all as specified by Engr-in-Charge. .

M&L for 18 to 20 mm thick granite stone machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, over 15 mm th screed bed in cm 1:4 in shelves etc complete all :as specified and directed by Engr-in-Charge.

Rounding off edges of granite stone slab , such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for hard core of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L for 75 mm th PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base/ floor etc complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floor to be rough finished complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) as in floor/ padding etc finished fair and even without using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L Damp proof course 40 mm thick horizontal or vertical surfaces including necessary form work in PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregates complete all as specified and directed.

M&L for light shade vitrified tiles of 10 mm thick, double charged (square or rectangular) polished area of each tiles exceeding 0.36 sqm but n.exc 0.42 sqm in floor set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match the shade of tiles with & including 15mm thick screed bed or bedding layer of in cement mortar (1:6) complete all as specified and directed.

M&L for light shade vitrified tiles of 10 mm thick, double charged (square or rectangular) polished area of each tiles exceeding 0.36 sqm but n.exc 0.42 sqm in skirting/ dado, set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match the shade of tiles with & including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with MS handles and tower bolts, peg stay etc complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with MS handles and tower bolts, peg stey etc complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc, framed guard bars, barred iron doors, ladders, framed balsters, walk ways, railing, frame work of water tanks and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed.

M&L sheet glass ordinary quality 4 mm thick, glazing with oil putty with glazing pins in squares n.exc 0.50 sqm each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with screws to steel windows, complete all as specified and directed by Engineer- in -Charge.

S&F for 35mm thick flush shutters, solid core construction with block board core and plywood face panel and commercial type on both side, including provision of block suitable for taking mortice lock, latches and other fitting complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 150 mm long, aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium, anpdised handles, fabricated type, anodised complete all as specified and directed.

Supply and fix 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&Fstainless steel 25mm dia SS-304 grade curtain rod (drappery) including suitable decorative brackets, , stops, rolles etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded curshed stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight complete all as specified & directed.

S&F steel ventilator with top hung shutters including box type hinges with MS handles and tower bolts, peg stey etc or suitable fittings, complete with/without glazing bars, with one shop coat of primer complete all as specified and directed with guard bars/ grills.

M&L sheet glass frosted, ordinary quality 4 mm thick, glazing with oil putty in squares n.exc 0.50 sqm each pane complete all as specified and directed.

M&L for water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25 mm thick levelling/padding layer over roof surface .

Item No 45.00 contd-. (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . Execution to be done with authorised applicator of the manufacturer. Work will be executed in smart assurance system..

S&F vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed. Make- Jaguar Cat No-CNS-WHt-551PN/Prayag cat No-4019/ equivalent in Parryware.

S&F Health Faucet with 1 mtr metalic expandable tube & hook complete all as specified and directed. Make : Jaguar model No. ALDCHR 585/ Paryware model No T9941A1/ Hindware No- F160068.

S&F 15mm bore two way Angle stop cock, Chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Prayag Cat No. 8611/ parryware cat G4743A1/ equivalent in jaguar/Hindware.

S&F brass CP Jet spray (L- Band) with 1 mtr expandable tube & hook complete all as specified and directed. Make: Prayag Cat No. BEA-18 or equivalent in jaguar/ parryware as approved by GE.

S&F PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle , including brackets 8 ltr capacity, including PVC flush pipe complete all as specified and directed.

S&F of CPVC pipe 20mm outer dia SDR 11,using special fittings (Brass elbow, brass Tee, male threaded brass adopter,female threded brass adopter, union etc) laid in trenches complete all as specified and directed.

S&F Oval type counter top vitreous china wash hand basin with brackets, white, size 550 x 400 mm including CP brass pop up waste fitting with long screwed shank and fly-nut, 32 mm PVC waste pipe including cutting for and pinning in ends of brackets complete all as specified. Make- Paryware Cat No-C0460/ Hindware -10010/ Jaguar Cat No-CNSWHT 801.

M&L for CP bottle trap with wall connection pipe & wall flange complete all as specified and directed. Make : Hindware Cat No F850015/ Parryware Cat No. T3201A1/ Cera F8060401

S&F Tall Wash basin mixer, brass, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts screwed for 15mm bor iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat Part No. FUS29005NB / Parryware Cat Part No. G4846A1/equivalent in Hindware.

S&F for 15mm dia PVC connection 450mm long complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F chromium plated bib taps short body, fancy type, with wall flange screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. Make:- Jaquar Cat Part No. ALI-85037/ Hindware Cat Part No F-370004/ Prayag Cat Part No S9906

S&F 15mm bore Angle stop valve, Cast copper alloy, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed. Make: Jaquar Cat Part No. FON-40053/ Hindware Cat Part No F160017/ Prayag Cat No 9410.

S&F soap dish, brass chromium plated 100x100x60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. Make : parryware Cat No T-6403A1(APUS)/ Prayag Cat No. BA-45/ equivalent in Hindware/ Jaguar.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated guard and railling size 500x125mm (with brass bracket) complete all as specified and directed. Make : Prayag Cat No BEA-44/Parryware cat No-T-6703A1/ equivalent in Jaguar.

S&F brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges. Make : Prayag Cat No. BA-01/Parryware cat No-T-6001A1 / equivalent in Jaguar.

M&L for PVC floor trap 75mm outlet , palin with grating including joing with solvent cement complete all as specified and directed by Engr-in-Charge.

M&L for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

All as per item No 64.00 here in above but in wall complete all as specified and directed.

M&L for 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laind in trenches or in floor complete all as specified and directed.

M&L for 110mm bore PVC (SWR) vent cowl complete all as specified.

M&L for PVC (SWR) bends with access door of 110mm bore any radius complete all as specified and directed.

M&L for pre-polished rubber moulded pavement coloured chequred tiles glossy finish of size not less than 300x300x20-22 mm thick with anti skid properties laid over and including 20mm thick screed bed in CM (1:6) including space bar complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Returning filling in, including spreading, leveling and watering, well ramming n.exc 25cm thick layer in soil complete all as specified and directed.

Removing excavated material (Soils) to a distance not exceeding 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for Sand filling under floors including watering and well ramming complete all as specified and directed. Note :- Only compacted thickness shall be measured.

M&L for machine pressed rubber moulded precast cement concrete interlocking paver block, prepolished, coloured, any shape and size confirming to IS 15658-2006, of 60mm tickness, M-35 grade, in floors laid dry over 25mm sand cushion and joints filled with sand complete all as specified and directed by Engineer-in-Charge.(Shade and design of tiles shall be approved by GE)

M&L filleting exc 25 but n exc 50 sqcm in any position and to any shape in cement mortar (1:3) including all mtrs stops etc complete all as specified and directed.

S&F mild steel work as in columns / posts for roof / trusses and connecting plates etc imbeded in PCC including all necessary drilling, welding, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note - Cement concrete will be measured and paid separately.

M&L for complete removal of existing roof treatment upto slab including cleaning of mortar , roots, moulds, moss efforescent salt , oil greasy spot etc complete all as specified. (Preparation of surfaces shall be passed by GE before applying treatment and shall be recorded stage passing register.

M&L for 20-25 mm thick machine cut kota stone slab of as in flooring edge cut, one colour, over & including 20mm thick screed/bedding layer in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 15-18 mm thick machine cut kota stone slab of as in skirting/ dados edge cut, one colour, over & including 20 mm thick rendering in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) as in sub base for laying floor finishes, complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) as in walls or retaining wall, any thickness, size or shape including plaster, buttresses coloumns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed by Engr-in-Charge.

S&FMS work with rolled mild steel in plates ( plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-210 Gde-165 complete all as specified and directed.

S&F mild steel butt hinges cold rolled medium weight 100mm size complete all as specified and directed.

M&L for reinforced cement concrete(1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in foundations, includng rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified & directed.

M&L for reinforced cement concrete type A-1, (1:1½:3) (using 20 mm graded stone aggregate) as in Beams, Cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for reinforced cement concrete (1:1½:3) type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, shelves and the like.

M&L RCC (1:1½:3) type A1 (using 20mm graded crushed stone aggregate) in Coloums, pillars, piears, posts and struts Complete all as specified and directed.

M&L for precast reinforced M-30 grade factory made cover slabs 60-70 mm thick and size as per site requirement in cover slabs for manholes etc. and similar articles with plain faces including necessary forms, moulds as required, set in cement mortar (1:4) complete all as specified and directed.

S&f TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 89.00 here in above but 6 to 8 mm dia. Bars complete all as specified and directed.

S&f TMT bars 5mm dia and over up to and including 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface complete all as specified

M&L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified

M&L for steel formwork square, rectangular or plougonal for fair finished surfaces to sides of pillars, posts, struts, piears, coloumns and stanchions for fair finished surface complete all as specified and directed.

M&L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for steel formwork for fair finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bans in walls, horizontalor sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed.

M & L for salt glazed stonware drain pipes 150 mm dia grade A laid in trenches with cement joint over PCC bedding & haunching complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7-8 mm thick, joint free (Square/ rectangular) in floors,area of tiles exe 0.11 and n exe 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 450mm x 350mm 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering layer in CM 1:4 complete all as specified and directed.

S&F vitreous china water closet orrisa pattern 580x440 mm, white, with front or back inlet with integral 'foot rests and provn of cement concrete bedding, connecting to flushing pipe complete all as specified and directed. Make- Prayag ca No-4054/Jaguar cat No-CNS-WHT-451 / equivalent in Hindware.

Cutting to existing steel tubing of any dia for alteration/ addition to 15/ 20mm bore GI tubing including fittings complete all as specified and directed by Engr-in-Charge.

Supply, fixing, jointing and testing 15 mm dia galvanised steel water tubing medium grade with all fitting such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors,complete all as specified and directed.

Supply, fixing, jointing and testing 20 mm dia galvanised steel water tubing medium grade with all fitting such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.Make : Jaquar Cat Part No 40005 B/ ALI 8500B or equivalent make as approved by GE.

S&F waste coupling of PTMT (half of full threaded) (min weight 32-45gms) complete all as specified and directed by Engr-in-Charge.

S & F PVC waste pipe 32 mm dia ,80 cm long for wash hand basin/ urinal etc complete all as specified and directed.

S&F square grating with doom round openable type hinge arrangement 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed. Make: Prayag/ Cera/ Parryware

S&F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement all as in repairs specified and directed.

S&F PVC (SWR) junction 110 mm bore single (single T) equal or unequal complete all as specified and directed.

M&L providing concrete bed to 150mm dia drain pipe in PCC 1:3:6 type C-2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75mm x 50mm x 50mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water prof termite proof fire retardant and having good screw holding capacity complete all as specification and drawing complete all as specified and directed. Make : ECHON/Kumar Tech/Sintex

S&F 24 mm thick moulded WPC factory made 100% solid door shutter(conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified. Make : ECHON/Kumar Tech/Sintex

S&F rotational moulded polyethylene water storage tanks 1000 Ltrs capacity three layered, externally white (cylindrical vertical with closed top) hoisted and fixed in position including PTMT ball valve 20mm bore with polythelene float, 20mm dia GI medium grade over flow pipe(approx lengh1.5 mtr), 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F gun metal globe or gate valve of size 20 mm dia with iron wheel head screwed both ends and for iron pipe & fixed, ISI marked, complete all as specified and directed.

M & L 10 mm thick rendering in cement mortar (1:3) on fair faces of ceiling ,finished even and smooth without using extra cement complete all as specified and directed.

M&L for Point wiring with 1100 Volts grade 1.5 Sqmm (nominal area) PVC insulated but unsheathed multistranded copper conductor single core FRLS cable and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly, drawn through and including non metallic medium duty rigid PVC concealed conduit (medium duty) 20mm dia or higher size complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed steel junction box of thickness 1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, complete all as specified and directed by Engr.-in-charge of following. Note:- Wire/cable colour coding shall be maintained properly as per IE rule. (Make of conduit & accessories- Precision/Polycab/AKG, Make of wire- Polycab/L&T/KEI)

(a) One light point/ bell buzzer point controlled by one, one way switch

(b) One ceiling fan/Exhaust fan point controlled by one-one way switch through Regulator.

(c) One three pin 5 Amp socket on same board with other switches.

(d) One three pin 5 Amp socket on independent board

All as per item No.116.00 above here in but with 2.5 Sqmm (nominal area) wire/cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F of switch piano flush, button type 5 Amps SP complete all specified.

S&F of switch piano flush button type 15 Amps SP complete all as specified & directed.

S&F of socket outlet multipurpose 3 pin 5 amps and 2 pin 5 amps, complete all as specified and directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm. complete all as specified & directed.

S&F lamp holder,PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified & directed.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door 8 way IP-43DB's suitable for one MCB SPN as incoming and six MCB SP as out going, mounting flush on wall and making good disturb surfaces complete all as specified and directed by Engr-in-charge including taking down old DB with MCBs (MCB shall be measured and paid separately) Make:- Legrand /ABB/Schneider

S&F MCB, double pole 240 volt, 10 KA, 40 Amp, 'B' curve conforming to IS complete all as specified and directed. Make:- Legrand /ABB/Schneider

S&F MCB, double pole 240 volt, 10 KA, 40-63 Amp, 'B' curve conforming to IS complete all as specified and directed. Make:- Legrand /ABB/Schneider

S&F MCB, SPN 240 volt, 10 KA, 40 Amp, 'B' curve conforming to IS complete all as specified and directed. Make:- Legrand /ABB/Schneider

S&F MCB/ Isolator, double pole 240 volt, 10 KA, 5-32 Amp, 'B' curve conforming to IS complete all as specified and directed. Make:- Legrand /ABB/Schneider

S&F MCB single pole 240 volt, 10 KA, 6-32 Amp, 'B' curve conforming to IS complete all as specified and directed. Make:- Legrand /ABB/Schneider

S&F wall mounted tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed. Make:Philips Cat Part No TMC 501P1xT LED 22WP-3241(tube batten) and MAS LED 1200mm 18W-865-T-81 (tube)/ Wipro Cat No WI0922208 (Tube Batten) LL13-181-65SE (tube) / Havells Cat Part No LUMILINEPLUSBS20WLE86SPCSS (tube Batten ) CRYSTAL 1213T8DSTL20WELD865SGLASS (tube double side)

S&F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS and CFL pin type direct fit in holder complete all as specified and directed. Make :- C& S,/Havells/Phillips/SURIYA ROSHNI.

S&F exhaust fan metalic body complete with louver 230V, single phase 300mm sweep including connecting with three core 23/0076 copper wire from ceiling rose to fan complete all as specified and directed. Make: Havell/ Crompton/ Usha

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium 15 mm. bore, and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion. (Note:- (i) If the desired earth resistance is not found within permissible limit shall be redone by the contractor at no extra cost. (ii) Cost of GI wirre 4 sqmm and 15mm dia pipe medium grade upto 7.5 mtr is included in the rate quoted for this item).

Supply, laying & connecting XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 2 core including fixing lugs, cable gland etc including bare conductor duly insulated with Pvc heat shrinkable sleeve 1.1 KV grade at both end complete all as specified and directed.

Supply, laying & connecting XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 2 core including fixing lugs, cable gland etc including bare conductor duly insulated with Pvc heat shrinkable sleeve 1.1 KV grade at both end complete all as specified and directed .

Supply, laying & connecting XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 2 core including fixing lugs, cable gland etc including bare conductor duly insulated with Pvc heat shrinkable sleeve 1.1 KV grade at both end complete all as specified and directed.

Supply & Laying well burnt bricks, sub class 'B' brick laid breadth wise, along the cable in trenches after sand cushioning laid for protection of UG cable protection complete all as specified and directed.

M&L for sand cushioning in trenches for protection of UG cable with river bed sand laid dry in trenches before and after laying of cable, including well ramming and consolidation complete all as specified and directed. (Punned thickness shall be measured)

S&F for integral LED street light luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with fram IP-65 protection road way luminaries with high power LED 40/45 watt with efficiency 100 lument/ watt at system level, CCT>5700K, with average life class 50,000 buring hours, complete all as specified and directed. Make: Crompton model No LSTP-45-CDL/ Havells Model No ENDIRAPEARLNEOSL 40WLED757PASYTOPC/ Philips Cat Part No BRP409LED CW036MRFGIPSUGR and Syska SSK-ST-40W .

Supply, laying & connecting XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including fixing lugs, cable gland etc including bare conductor duly insulated with Pvc heat shrinkable sleeve 1.1 KV grade at both end complete all as specified and directed .

M&L 50 mm bore steel tubing medium grade ISI marked for protection of cable including necessary fittings fixed in trenches/walls/under floor , complete all as specified and as directed.

S&F Step type regulator double module 5 step for ceiling fan 1200/ 1400 mm size , 230 volt, 6 Amp, 120 watts including connection to ceiling rose complete all as specified & directed.

S&F sheet metal enclosures double door distribution board 240 volt 4 way IP-43 DB's suitable for one MCB SPN 01 No and MCB 6 Amp 2 Nos mounting concealed in wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge Make: Legrand/HPL/ABB

S&F sheet metal enclosures double door distribution board 240 volt way IP-43 DB's suitable for MCB/Isolator concealed in wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge Make: Legrand/HPL/ABB

Supply & fixing ceiling fans complete with blades , 230 volts, 1400 mm sweep, white/brown/ ivery in colour, BEE 5 star rated with making necessary fixing arrangements,three core flexible copper conductor cable (23/0.0060) from ceiling rose complete all as specified and directed. Make. Orient/ Havells/Usha as approved by GE.

S&F of energy saving bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watt complete all as specified and directed by Engr-in-Charge. Make: CG Cat LBHP-10-CDL/ Philips WT 140W LED7S CW PSU S1 PC/ Havells ENDURA RUGBYNEO/ Mepro Cat No BCL 23 Plain.

M&L sub main wiring with 2 Single core FRLS PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia medium duty PVC concealed conduit and conduit accessories and fittings including one single core green colour FRLS, PVC. Insulated unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity conductor upto common earth and connected to earth dolly complete all as specified & directed. (Note: Two run 4 Sqmm cable and one run 1.5 Sqmm cable and one run conduit shall be measured as one run.)

S&F Bell switch paino flush button type 5 Amp complete all as specified.

S&F ding dong bell AC 230 V single pole complete all as specified and directed .

S&F, MCB SP upto 32 Amp, 240 Volts, 'C' curve having breaking capacity 10 KA. Make : Legrand/ Siemens/ABB as approved by GE.

S&F, MCB SPN 40 Amps 'C' curve 240 Volts having braking capacity 10 KA. Make : Legrand/ Siemens/ABB as approved by GE.

S&F 20 watts 6500K , 4 feet long LED batten 2000 lumens fitting with extruded aluminium housing 4 feet with intregated LED & electronic driver & all accessories pre-wired including connecting to source ,complete all as specified and directed by Engr-in-Charge. Make: Wipro Cat LL20-281-xxx-65AL1/ Philips BN021C LED 20S-6500PSU CW GR S2 / Havells ENDURALINEARNEOBS20WLED865SPCWH/Crompton LLCLB 16-CDL as approved by GE.

Supply & fixing Street light fitting LED type 60 W of die-cast IP 66 aluminium housing, 60 watt LED 6000K lense type and toughened glass having separate surge protector 10 KV, efficiency of minimum 100 lumens/watt, incl adaptor (if any) required to fix with existing bracket of min 40 mm dia complete with all accessories all as directed incl taking down existing fitting complete. Make: Havells cat No-LHETAXU7PN6J060/ Philips cat No-BRP409LED60CW HE NR PC51 PSUGR/equivalent in Crompton as approved by GE.

S&F Decorative Square/Round surface mounted LED flat panel PDC aluminium housing and PMPA diffuser makes it a robust Luminaire 12 Watts PF 0.9 and above operating voltage 150V-300V colour temp 6500K & lumen input output 70 Lumen per watt incl provisioning of 3 core white flexible multistranded copper conductor 23/0.0076 from ceiling rose to light connector complete all as specified and directed by Engineer-in-charge Make : Crompton cat part No LCDN-12-CDL/TL/WW/Wipro cat No LD80-101-XXX-60-XX/Philips Cat No DN092B LED10S-3000-PSU-WH

M/s Anil Kumar