T-59/EDCP/2023-24

Amount

Safe carriage of following materials from store centre-Pilibhit to different sites under EDD-Pilibhit including loading & unloading (sites/location detail enclosed as annexure-10)

11/0.4 KV, 250 KVA T/F.

Other Material:- LT PVC Cable 1x240 sq. mm., 11 KV composite Pin Insulator etc. Providing by department.

Opening/Dismantling of all connections from old 100/160 KVA transformer, landed of transformer from double pole by crane and safe carriage from mentioned sites under EDD-Pilibhit of (sites/location detail enclosed as annexure-10) store centre-Pilibhit including loading & unloading and stacking at proper place.

Construction of 250 KVA T/Fs plinth for 250 KVA T/F of size 5 fit x5 fit x5 fit with the help of first class bricks, cement & coarse sand as per norms. Filling the structure completely by brick blast & plastering work of walls Including CC work on top in ratio 1:2:4 by cement, stone grit & sand and grouting of 2 nos. M.S. channel of size 50x50x5 mm on the top of T/Fs plinth whole work should be done as per RESSPO norms complete in all respect. (All Material will be provided by Contractor on his own cost).

Mounting of 250 KVA T/F on newly constructed plinth, laying of cable jumpering and making all HT/LT connections complete work in all respect.

Fabrication and grouting of wire mesh fencing of 28 fit running length in rectangular shape height 2 meter with M.S. angle of size 50x50x06 mm. including gate at one side as per norms complete work and painting of same with 2 coats of red oxide and 2 coats of synthetic enamale paint. (All Material will be provided by Contractor on his own cost).

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Fabrication and Installation of 11 KV fuse set on midway 11 KV double pole structure with mention material As- MS channel 100x50x2028 mm, Iron strip-50x5x305 mm, fuse wire and holding clamps etc. complete work in all respect all required materials provided by contractor on his own cost.

Providing and fixing of henely type LT tailess units 400 Amp. Complete work in all respect all required materials provided by contractor on his own cost.

Laying of LT PVC cable 1x240 Sq. mm

M/S HINA ELECTRICALS

TYCOON ENGINEERS