Replacement of 01 No. 170 H.P. Motor with Pump and Control Panel at Juni Road Water Works at BBMB Pandoh

Amount

Dismantling lead Caulked Joints of cast iron Socketted Pipes, Valves and Specials by heating the Joints including the cast of Labour, Fuel and tools, etc., collecting the lead taken out from the joints and ride back the same to the Engineer-in-charge. (f) 150mm i/d of pipes, valves and specials

Dismantling concrete (d) Cement concrete plain1:2:4 mix

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. (G) RCC Grade M30 (i) Using Concrete Mixer

12.5 mm thick cement plaster 1:4

Motor with Pump (Horizontal Split Casing Centrifugal) A. - ISI Marked ( Stage – 2 ), Head-100 mtr, Flow-300 m³/Hr, Motor-125 KW/170HP, Speed-1470 RPM. make i.e. Kirloskar/Flowmore/WPIL/KSB B. Suc. X Del. :- Size 200 x 150mm Type Of Pump:- Horizontal Split Casing Centrifugal pump M.O.C:- CI casing, Bronze Impeller, SS Shaft. C. SCOPE OF SUPPLY: Pump, Motor, base frame, coupling, guard, foundation bolts, companion flanges etc. As per annexure B & C

ISI Marked - Automation of 125KW/170 HP no. soft starter/VFD in one panel A. Soft starter/VFD of appropriate rating for motor specified in technical specification for the purpose of controlled starting and stopping of the pump, with adjustable upper and lower voltage and current limit , including all leads and lifts and as per entire satisfaction of Engineer - in - charge (No.) B. Frequency Meter for AC supply of appropriate capacity suitable for the above specified motor , including all leads and lifts and as per entire satisfaction of Engineer - in charge.(No.) C. Multifunction meter for AC supply of appropriate capacfity suitable for the above specified motor, including all leads and lifts and as per entire satisfaction of Engineer - in -charge.(No.) D. MCCB of appropriate capacity suitable for the above specified for motors power ON/Off , including all leads and lifts and as per entire satisfaction of Engineer - in- charge.(No.) E. Indicator for mains ON-OFF-TRIP, RYB Phase, including all leads and lifts and as per entire satisfaction of Engineer - in - charge. (Set) F. Ammeter & Start-Stop push button for starer on/off. (Set). G. Rust free powder coated Control panel suitable for housing all the above listed electrical and electronics components, including all leads and lifts and as per entire satisfaction of Engineer - in - charge.(No.) H. Earth leakage circuit breaker/relay of recommended make such as Elmeasure/ selec/L&T /MET/GEC conforming to BIS-2516-1977 with upto date ammendments and of suitaible range which should have control box, oprating handel and trip/reset push button, on/ off indicators, re-indicating off spring condition of the circut breaker for over current protection. The circuit should be equipped with magnet thermal release with metallic tap CTS. It should also be fitted earth fault for tripping of breaker on occurance of earth fault on/ of breaker load side compatible with the automation system, including all leads and lifts and as per entire satisfaction of Engineer - in -charge.(No.) I. Supply & errection of floor/wall mounted power factor shunt capacitor conforming to BIS 2834-1986 or latest with upto date ammendments of schneider /ABB/L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually,of required KVAR according to HP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including L&T//Kilburn/Standard/Siemen/Havells make ICTP switches conforming to BIS 40641978 or latest with HRC fuses (Range to be specified by the tenderer), including all leads and lifts and as per entire satisfaction of Engineer - in -charge.(No.) J. Installation & Commissioning Charges. (Job). As per annexure D

ISI Marked CI D/F Sluice Valve Isi Pn 1.6 Pd With Ssp & Hw 150mm ( WITH ELECTRICAL ACTUATOR )

ISI Marked CI D/F NRV Isi Pn 1.6 Pd With Ssp & Hw 150mm ( WITH ELECTRICAL ACTUATOR ) Suc. X Del. :- Size 200 x 150mm Type Of Pump:- Horizontal Split Casing Centrifugal pump M.O.C:- CI casing, Bronze Impeller, SS Shaft.

ISI Marked MSERW ZINC COATED PIPE IS/ISO 3183 150 MM X 5.6 L-320 X-46.

ISI Marked MSERW ZINC COATED PIPE IS/ISO 3183 200 MM X 4.8 L-210 X-42 Suc. X Del. :- Size 200 x 150mm Type Of Pump:- Horizontal Split Casing Centrifugal pump M.O.C:- CI casing, Bronze Impeller, SS Shaft.

3 Core Copper Cable 95 sqmm SCOPE OF SUPPLY: Pump, Motor, base frame, coupling, guard, foundation bolts, companion flanges etc.

Bidder Name

Amount in Words

AMAN SHARMA

SANGRAM NAIK

S.B Trading Company

S.B Trading Company

AMAN SHARMA