Loading…
Loading…
Tender Value
₹23.3 L
EMD Value
₹46,600
Closing Date
14 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
12 conditions · 1 needing a document upload
The tenderer must hold a valid Electrical Contractor's License in the name of the participating firm/company, as required under IE Rules 1956, Clause 45. Any offer not meeting this requirement shall be summarily rejected. Relevant supporting documents must be submitted along with the tender. It shall be the sole responsibility of the contractor to comply with all statutory obligations, including liaising with State authorities and obtaining necessary permissions to execute works across different states,if work is awarded.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
39 conditions · 10 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please provide details of banks account no. of the firm for ECS payment required for necessary payments record as per Annexure-XII of Northern Railway Standard Tender Document 2022.
Please provide details of PAN no. (Self attested copy should be uploaded)
Please provide details of your GSTIN No. (Self attested copy should be uploaded).
Quantity of items may be decreased or increased as per site requirement:- i) For increase in quantity the payment will be made to the bidder as per GCC 2022 or latest. ii)The quantity mentioned against the items if decreased on the basis of requirements as per site then payment will be made to the bidder only for the quantity that has been executed at site. iii)The tenderer has to quote his rates keeping this in view.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 2 (two) years.
Care in Submission of Tenders: Please refer to clause 3.0 of Northern Railway Standard Tender Document 2022
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
Mandatory updation of Labour data on Railway's shramikkalyan portal by Contractor.For details refer clause 5.4 of Northern Railway Standard Tender Document 2022
In addition to General condition of contract 2022 and Northern Railway Standard Tender documents, special condition attached shall also apply.
The quantities given above are approximate and can be increased/decreased as per extant rules.
The GST Act 2017 will be applicable as per extant policy as notified by Central/State Govt. and as amended from time to time. All the bidders/tenderers should ensure that they are GST compliant and their quoted rates are inclusive of taxes and GST.
No Post Tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suomoto post tender letters of the tenderers shall be treated as NULL & VOID. (Authority HQ Letter No. 74-W/O/Pt.XXV/WA/Loose dated 07.04.15).
The contract will be governed by Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
All Annexure should be uploaded in Standard format as prescribed in Standard Tendered Document-2022.
Undertakings by Partnership Firm- In case the Letter of Acceptance (LOA) is issued to a partnership firm, the undertakings as per clause 10 of Annexure -VIII of Northern Railway Standard Tender Document 2022 shall be furnished by all the partners through a notarized affidavit, before signing of contract agreement.
Fraud & Corrupt Practice: Please refer to clause 3.10 of Northern Railway Standard Tender Document 2022.
Conditional offer and Alternative proposal by Tenderer: Tenderers shall submit offers that fully comply with the requirements of the Tender documents including the conditions of contract, design and specification requirements if any. Conditional offer or alternative offers will not be considered in tender evaluation and will be summarily rejected. The Tenderer shall have no claims in this regard whatsoever. "Any unconditional rebate offered by the tenderer should be mentioned on of 'Schedule of Quantities' specifically. To attract the rebate mentioned each page of schedule may refer the note for the conditional rebate mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid." mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid."
The tenderer shall ensure that the proper social distancing is maintained while execution of work besides following all the guidelines issued by Ministry of Health and Ministry of Railways in regard to COVID-19 pandemic.
Electrical work in connection with 2nd entry gate at Yamunagar Jagadhari under Amrit Bharat Scheme(2nd Revised Estimate for Provision of 12.00 m wide FOB at Yamunanagar Jagadhrl Railway station under Amrit Bharat Station Scheme) and upgradation of Parcel office over Ambala Division.
30-Elect-T-07-2026-27
30-Elect-T-07-2026-27
Open
Works - General
4 Months
Ambala, Haryana
₹0
₹46,600
14 Aug 2026
24 Jul 2026
31 Jul 2026
44 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 20,62,602.8 | ||
| — | 200.00 | — | — | ||
| Supply & recessing/ fixing of P V C conduit pipe conforming to IS 9537 part- III/1983(latest version) with accessories , junction box etc. including making chase , plastering/clamping etc. as per technical spec. i)25 mm (medium) | — | — | — | 9,728 | |
| — | 450.00 | — | — | ||
| Supply, laying, fixing, testing and commisioning of following sizes FRLS PVC insulated multi-stranded copper conductor single core cable 1100V conforming to IS 694 ( latest version ) make Finolex, Havells, Polycab, KEI or equivalent in the existing (recessed/Surface) MS/PVC/HDG Conduit pipe for wiring of point wiring/circuit wining/Sub main/Main as required & as per explanatory note. i)1.5 sqmm | — | — | — | 7,609.5 | |
| — | 3.00 | — | — | ||
| LT PTTA with IP-65 protection with canopy Junction box -Design, manufacturing, supply, install, testing, erection and commissioning of junction box with 100 Amps MCCB, 4-Pole 36kA & rotary operated mechanism, FP spreader with Aluminium bus bar. As per specification. | — | — | — | 1,38,936.75 | |
| — | 1.00 | — | — | ||
| Design, supply, installation, testing & commissioning of weather proof outdoor feeder pillar (MCCB incoming & MCCB outgoing) comprising with the following MCCB's fixed in it of make Havells, Siemens, L&T, schneider, Legrand or equivalent confirming to IEC 60947-2/IS 13947:2008 & IS 8623:2008 or latest with digital measuring instrument & bus bar arrangement and confirming to PCEE/NR spec. no. 126-Elect./PS/2019 or latest and as per IS, IR rules and site requirement. 4P MCCB 400A 36kA with adjustable thermal & fixed magnetic release = 01 No. (Incoming) 4P MCCB 125A 36kA with adjustable thermal & fixed magnetic release = 04 Nos. (outgoing) | — | — | — | 1,39,089.31 | |
| — | 112.00 | — | — | ||
| Design, manufacture,display, installation of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical shape.The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness.The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site equirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 3,34,243.84 | |
| — | 112.00 | — | — | ||
| Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 33,435.36 | |
| — | 8.00 | — | — | ||
| Supply, erection testing and commissioning of 6 mtr height double arm decorative GI pole with cast aluminium arms including 2 nos 80W teardrop LED fitting along with foundation as per manufacturer's design complete of reputed make Bajaj, Havells and Philips or equivalent. | — | — | — | 3,37,477.44 | |
| — | 10.00 | — | — | ||
| Earthing with 40mm dia. Earth GI pipe class 'B' , 3 meter long, earth electrode as earth per IS:3043 (latest version) to achieve earth resistances less than 5ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch earth gear/pole as per technical Specification/I.E. Rule. | — | — | — | 30,929.7 | |
| — | 500.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as per technical specification. | — | — | — | 4,255 | |
| — | 1500.00 | — | — | ||
| Laying of 2/3/4 core 16/25/35/50/75/95 /120/240/400 sqmm LT UG/XLPE in Trench/Pipe/Cable tray as per site requirement all as specified and as directed. Note:- LT UG Cable will be supplied by the Railways free of cost. However, Contractor has to make own arrangement for shifting the cable to site from the Elect maintenance Depot store. | — | — | — | 39,450 | |
| — | 1000.00 | — | — | ||
| Excavation of cable trench by digging 1000 mm deep and then refilling after laying of cable as per IS1255:1983 and technical specification on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, levelling and repairing the floor to its original condition. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | — | — | — | 1,08,200 | |
| — | 100.00 | — | — | ||
| Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100 mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture 100 mm deep from top. i) Trench width 300 mm wide for laying up to 3 cables with 9 protective bricks per meter. | — | — | — | 40,563 | |
| — | 250.00 | — | — | ||
| Supply and laying of HDPE pipe conforming to IS 4984:1995 50mm dia wall thickness 3 mm PN-6 under the road/air. The work invloves laying of HDPE pipe. | — | — | — | 25,232.5 | |
| — | 250.00 | — | — | ||
| Supply & laying of HDPE pipe of 110mm dia, wall thickness 7.7 to 8.7mm. The work involves laying of cable in HDPE pipe. (As per specification) | — | — | — | 1,09,090 | |
| — | 500.00 | — | — | ||
| Excavation and refilling of trench 0.3 Mtr. wide and 0.8 mtrs deep on pitched/stone/brick/ paved surface, road/crossing/platform etc and restoring the surface to its original condition. | — | — | — | 73,550 | |
| — | 15.00 | — | — | ||
| Supply & erection of 5 mtrs high hot dip galvanized Octagonal pole with top 70 mm around face bottom 130 mm thick steel base plate size 200X200X12mm complete with appropriate sleeve at the top of pole for following mounting arm bracket 300 mm long suitable foundation and foundation GI nut bolt with washer and smart pack junction box with 6 Amp RCBO, 30mA Sensitivity and terminals and as per explanatory note.i)Single Arm bracket | — | — | — | 1,85,280.45 | |
| — | 15.00 | — | — | ||
| — | 45.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure A
ATTACHMENT
AnnexureXXIV.pdf
ATTACHMENT
AnnexureXXIVA.pdf
ATTACHMENT
GCCwithcorrectionsliplatest_compressed.pdf General conditions of contract
ATTACHMENT
GCCCorrectionslips_compressed1.pdf
ATTACHMENT
GCCACS11_compressed.pdf
ATTACHMENT
LatestCEESpec_compressed1.pdf
ATTACHMENT
TenderDOCT8.pdf
ATTACHMENT
6mtrDecorativepoledrawing.pdf
ATTACHMENT
Poledrawing5meter.pdf
ATTACHMENT
Annexure-APartnershipRetirementEmployes.pdf
ATTACHMENT
GCCwithcorrectionsliplatest_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .