Construction of Civil works of barrage, intake, adits, HRT, surge shaft, power house building including appurtenant works along with supply, erection, testing, commissioning of Hydro-Mechanical works like barrage spillway gate, intake gate, surge sha

1. CARE AND DIVERSION OF RIVER /As per Technical Specification (SECTION B.8)

1.1 Design and Construction of Coffer Dams along with maintainence, seepage control measures and dewatering etc. including cost of all materials, machinery, labour, complete in all respect as required for the construction of barrage and intake structure /As per Technical Specification and tender drawings(8.1 to 8.7)/As per tender Drawing number -TP-ujvnl-shbh-bid-RD-102/103.

2. OPEN/SURFACE EXCAVATION AT BARRAGE AND INTAKE AREA (Including cost of dewatering) /As per Technical Specification (SECTION B.2)

2.1.4) Removal of tunnel excavation caused by Geological Over breaks

12.1) Gabions/Wire crate/MSME wall with boulders filling /As per Technical Specification (16.3/16.8.2/16.8.3)

2.3) Dental Excavation /As per Technical Specification (2.3.3/2.4.5/2.10.1/2.10.7)

3. ROCK SUPPORTS /As per Technical Specification (SECTION B.4)

3.1) Rock anchors(25 mm dia ) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.1.1 Length up to 6 m

3.1.2 Length more than 6 m

3.2) Rock anchors (32mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.2.1 Length up to 6 m

3.2.2 Length more than 6 m

3.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.3.1 Length up to 6 m

3.3.2 Length more than 6 m

3.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.4.1 Length up to 6 m

3.4.2 Length more than 6 m

3.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

3.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.6.1 Length up to 6 m

3.6.2 Length more than 6 m

3.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.7.1 Length up to 6 m

3.7.2 Length more than 6 m

3.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

3.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

6.12)Self Compacted Concrete (SCC) M35/A10

itemH1Code296

4.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

4.2) Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

Carrying out Tunnel Seismic Prediction (TPS) Survey/ Measurement in tunnel with data processing, evaluation and Report submission in 3 copies (Hard and Soft) inculding all preparatory works and mobilization of requisite machineries, equipment, manpower, expert personnel and other field expenses, if any, including all lead and lift, taxes etc. complete.

5. FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

5.1) Random backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.3/6.10/6.11)

5.2) Compacted backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.3/6.10/6.11)

5.3) Free-Draining backfill including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.2/6.10/6.11)

5.4) Graded/ Inverted Filter including cost of backfill materials,labour and T&P complete in all respect As per Technical Specification (6.5/6

5.5) Stone pitching /As per Technical Specification (6.6/6.10/6.11)

6. DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

6.1) Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

6.2) Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

3.3)Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

Placing in position of sand bags including supplying sand and filling the same in empty bags and tying with contractors binding wire, leading to tunnel site with contractors men, material, consumables, tools and plants, equipments, machIneries, including all lead and lift, loading, unloading etc. complete.(filling sand bag of weight 50 Kg shall be counted as 01 number)

6.3) Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

6.4) Drilling for curtain grouting including labour and T&P complete in all respect /As per Technical Specification(7.8.2.1/7.8.4.6/7.9.7)

6.5) Grouting operation for curtain grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.8.4.6/7.9.7)

Removal of sand bags, when not required and disposal thereof with contractors men, material, consumables, tools and plants, equipments, machineries, including all lead and lift, loading, unloading etc. complete.(filling sand bag of weight 50 Kg shall be counted as 01 number)

6.6) Grouting materials for Curtain grouting incuding cost cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.7) (1 Bag = 50kg of Cement)

6.7) Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

6.8) Perforated PVC pipes 50mm dia in drainage holes /As per Technical Specification (7.9.9)

6.9) Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

6.9.1 Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

6.9.2 Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

6.10) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

6.11) Water pressure test/Lugeon Test as per IS:6066 /As per Technical Specification (7.8.3/7.4.3/7.9.12)

7. CONCRETE IN BARRAGE AND INTAKE AREA INCLUDING FOUNDATION (including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent and bentonite as per design mix etc.)/As per Technical Specification (SECTION B.9)

7.1) Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.2) Concrete of grade M15/A20/As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.3) Concreting of grade M20/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.4) Concrete of grade M20/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.5) Concrete of grade M25 /A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.6) Concrete of grade M25 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

7.7) Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17.1/9.17.7)

7.9) Porous concrete /As per Technical Specification (9.16.14/9.17.1/9.17.16)

7.10) Plums(stone) in concrete including cost of stones,labour and T&P but excluding cost of concrete as per design mix /As per Technical Specification (9.17.15)

8. REINFORCING STEEL /As per Technical Specification (SECTION B.11)

8.1) Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.12)

8.2) Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (11.7/11.12)

9. WATERSTOPS AND JOINTS /As per Technical Specification (SECTION B.12)

9.1) PVC water stops 300mm wide /As per Technical Specification (12.5.1/12.7)

9.2) PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

9.3) Bituminous coating /As per Technical Specification (12.5.5/12.7)

10. METAL WORKS /As per Technical Specification (SECTION B.13)

10.1) Providing and fixing G.I Pipe up to 100mm dia including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (13.5.2/13.9.1/13.9.2)

12.5) Providing and Fixing gun metal NRV (Non Return Valve) of approved quality (screwed end) of 50 mm/As per Technical Specification (15.5)

1.1)Common Excavation in all classes of soil /soft rock.As per Technical Specification (2.3.1/2.4.3/2.10.1/2.10.3)

10.2) Providing and fixing G.I Pipe above 100mm dia including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (13.5.2/13.9.1/13.9.2)

10.5) Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs), etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

10.6) Hand rails/Railing /Ladders /As per Technical Specification (13.7.4/13.7.5/13.7.6/13.9.5/13.9.6)

10.7) Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

PACKAGE-1 CIVIL WORK PART B (HRT,SURGE SHAFT,PENSTOCK AND ADITS ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

10.8) Supply and Erection of MS Earthing bar/flat and risers /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

11. MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION (Section B15 & B16)

11.1) Gabions /wire crate with boulders filling including all materials As per Technical Specification (16.3/16.8.2/16.8.3)

11.2) PVC pipes including all labour and T&P required for proper completion /As per Technical Specification (15.5/15.7.5)

11.2.1 75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

11.2.2 100mm nominal dia./As per Technical Specification (15.5/15.7.5)

11.2.3 150mm nominal dia./As per Technical Specification (15.5/15.7.5)

11.3) Random rubble masonry (wet) /As per Technical Specification (16.4.1/16.8.4)

11.4) Random rubble masonry (dry) /As per Technical Specification (16.4.1/16.8.4)

12. PERMEATION GROUTING (SEEPAGE CUT-OFF WORKS) /As per Technical Specification (SECTION B.19)

12.1) Drilling 136-172 mm dia holes by rotary/odex/percussion drilling including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification Item (19.4.4/19.5.1)

12.2) Supply and installation of TAM pipe/perforated grout casing pipe of internal dia 45-65 mm including cost of bentonite,materials,labour,T&P etc for proper completion of work./As per Technical Specification (19.4.8/19.5.1)

Fixing of anchor bars with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete.(Weight shall be calculated by material volume X denisty of MS steel 7850 kg/m³)

HRT Instrumentation/As per Technical Specification (SECTION B.17)

12.3) Permeation Grouting to attain the desired lugeon value including cost of cement,sand,ultra fine cement, sodium silicate, Bentonite,admixtures,all labour,equipment,T&P etc but excluding cost of drilling,cost of TAM pipe and shifting operation cost of equipments(1 Bag = 50kg of Cement)./ As per Technical Specification (19.4.7/19.5.1)

BoQ_Ver4.0

Fixed wheel vertical lift type Silt flushing gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

NUMBER #

12.4) Grouting operation for permeation grouting (Shifting of Equipments)/As per Technical Specification (19.4.8/19.4.9/19.5.1)

11.3.1) Using Cement , sand & admixtures

11.3.2) Using Micro-by-Ultrafine Cement

1. OPEN/SURFACE EXCAVATION (Including cost of dewatering)/As per Technical Specification (SECTION B.2 )

2. UNDER GROUND EXCAVATION In all classes of rocks /As per Technical Specification (SECTION B.3 )

2.2) Extra for lead for disposal of tunnel muck beyond 6 km measured from portal

6.3.1) Using Cement , sand & admixtures

6.3.2) Using Micro-by-Ultrafine Cement

5.3.2) Using Micro-by-Ultrafine Cement

PACKAGE-II HM WORK PRICE SCHEDULE-4 (Recommended parts ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

2.1) Adits, HRT, Pressure shaft,surge shaft in all classes of Rock/As per Technical Specification (3.8.1/3.8.2/3.15.1/3.15.2/3.15.3)

3. ROCK SUPPORTS FOR OPEN/SURFACE WORKS /As per Technical Specification (SECTION B.4 )

3.1.1 Length up to 6 m

3.1.2 Length more than 6 m

3.1 ) Rock anchors (25mm dia.)cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.2.1 Length up to 6 m

3.2.2 Length more than 6 m

3.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.3.1 Length up to 6 m

3.3.2 Length more than 6 m

3.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

3.4.1 Length up to 6 m

3.4.2 Length more than 6 m

3.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

3.2) Rock anchors (32mm dia.)cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

3.6.1 Length up to 6 m

3.6.2 Length more than 6 m

3.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

3.7.1 Length up to 6 m

3.7.2 Length more than 6 m

3.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

3.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

3.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4. ROCK SUPPORTS FOR UNDERGROUND WORKS /As per Technical Specification (SECTION B.4 )

4.1) Rock anchors (25mm dia.) cement grouted including co

st of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.2/4.10.1/4.10.2)

4.1.1 Length up to 6 m

4.1.2 Length more than 6 m

4.2) Rock anchors (32 mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.2/4.10.1/4.10.2)

4.2.1 Length up to 6 m

4.2.2 Length more than 6 m

4.3) Rock bolts(25mm dia)( Resin end anchorage and cement grouted) .including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.3/4.10.1/4.10.2)

4.3.1 Length up to 6 m

4.3.2 Length more than 6 m

4.4) Rock bolts(32mm dia)( Resin end anchorage and cement grouted) .including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.3/4.10.1/4.10.2)

4.4.1 Length up to 6 m

4.4.2 Length more than 6 m

4.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

4.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4.6.1 Length up to 6 m

4.6.2 Length more than 6 m

4.7) Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect/As per Technical Specification (4.5.8/4.10.1/4.10.2)

4.7.1 Length up to 6 m

4.7.2 Length more than 6 m

4.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

4.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

4.10) Permanent Steel support in Adits,HRT,Surge shaft, Pressure shaft and all type of underground works /As per Technical Specification (4.8/4.10.5.1)-Steel Ribs

4.11) Lattice Girders /As per Technical Specification (4.8.2/4.10.5.1)

4.12) Steel Lagging/As per Technical Specification (4.8.4/4.10.5.2)

4.13) Precast Reinforced Concrete lagging /As per Technical Specification (4.8.4/4.10.5.2)

Recommended Spare part 98

Recommended Spare part 99

6.6.1) Using Cement , sand & admixtures

Recommended Spare part 100

4.14) Forepoling using Reinforcement Bars/As per Technical Specification (4.9.1/4.10.6)

4.15) Pipe Roofing using Reinforcement Bars and Structural Steel/As per Technical Specification (4.9.2/4.10.6.3)

5. SHOTCRETE/As per Technical Specification (B.5)

5.1) OPEN/SURFACE WORKS

5.1.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

5.1.2) Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

5.2) UNDERGROUND WORKS

5.2.1) Plain shotcrete /As per Technical Specification(5.1 to 5.17)

5.2.2) Steel fibre reinforced shotcrete (SFRS) /As per Technical Specification (5.1 to 5.17)

6. FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

6.1) Random backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

6.3) Stone pitching /As per Technical Specification (6.6/6.10/6.11)

7. DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

7.1) Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

6.6.2) Using Micro-by-Ultrafine Cement

12.3.1) Using Cement , sand & admixtures

7.2) Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

7.3) Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

7.4) Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

7.5) Drilling of drainage hole/probe hole 38mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

7.6) Perforated PVC pipes 50mm dia. for drainage

7.7) Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

7.7.1) Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

7.7.2) Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

7.7.3) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

8. CONCRETE WORK in lining of Tunnels, Shaft, Galleries , backfill concrete , second stage work etc(including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent,Super plasticizer and bentonite as per design mix etc.)/As per Technical Specification (9.5/9.16.3/9.17.3.1/9.17.3.2) (SECTION B.9)

8.1) Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.2) Concrete of grade M20/A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.3) Concrete of grade M25/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.4) Concrete of grade M25/ A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

8.5) Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17)

8.6) Back fill concrete of grade M15/A20 /As per Technical Specification (9.5/9.16.4/9.17.4/9.17.5)

9. REINFORCING STEEL /As per Technical Specification (SECTION B.11)

9.1) Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.12)

9.2) Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (11.7/11.12)

10. WATERSTOPS /As per Technical Specification (SECTION B.12)

10.1) PVC water stops 300 mm wide /As per Technical Specification (12.5.1/12.7)

10.2) PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

10.3) Bituminous coating /As per Technical Specification (12.5.5/12.7)

11. METAL WORKS /As per Technical Specification (SECTION B.13)

11.1) Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs) etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

11.3) Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

5.6.1) Using Cement , sand & admixtures

12.3.2) Using Micro-by-Ultrafine Cement

2.1.1) For Rock Class A, B & C

11.4) Air vent pipe /As per Technical Specification(13.7.2/13.9.3)

12. MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION /As per Technical Specification (SECTION B.15 & B16)

12.2) PVC pipes including all labour and T&P required for proper completion/As per Technical Specification (15.5/15.7.5)

12.2.1) 75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

12.2.2)100mm nominal dia./As per Technical Specification (15.5/15.7.5)

12.2.3)150mm nominal dia./As per Technical Specification (15.5/15.7.5)

4.15.1) 50 Dia. Medium MS pipe

Second stage embedded parts such as sill beam, slide/wheel tracks & side seal seats, side guides, top seal seat, anchor bolts, nuts & washers, support angles, latching and storage arrangement over the piers and embedded parts and ladder for storage pit with steel grating etc. as per scope of work and technical specifications

PACKAGE-1 CIVIL WORK PART C (POWERHOUSE,SWITCHYARD AND TRC) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

PACKAGE-II HM WORK PRICE SCHEDULE-2 (Local Transportation including Port Clearance & Port Charges and inland Insurance) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

PACKAGE-II HM WORK PRICE SCHEDULE-3 (Model Test and Installation Services ) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

10.9) Supply and erection of MS pipe Dia 2 mtr as per approved GFC drawing including cost of all materials,labour,T&P etc for proper completion of work./As per Technical Specification (13.7.8/13.9.8)

Supply ,manufacture and erection in position of temporary supports/ struts in hazardous position. Note : On removal of temporary supports,released structural steel will be property of contractor.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, slide/wheel tracks & side seal seats, side guides, top seal seat, anchor bolts, nuts & washers, support angles, latching and storage arrangement over the piers and embedded parts and ladder for storage pit with steel grating etc. as per scope of work and technical specifications.

Second stage embedded parts such as sill beam, slide/wheel tracks & side seal seats, side guides, top seal seat, anchor bolts, nuts & washers, support angles, latching and storage arrangement over the piers and embedded parts and ladder for storage pit with steel grating etc. as per scope of work and technical specifications.

Dismantlling of existing permanent/ temporary supports and leading the cut supports to contractor's store/ depot etc with contractor's men,material, consumables, tools & plants, equipments, machineries, including all lead & lifts, loading, unloading, etc complete.

Cavity concreting through bores/local pipes (Bores/local pipes to be paid separately as specified below) with concrete of grade M10 or any approved mix using 10mm size aggregate with contractors men, material, consumables,tools and plants,equipments, machineries , including all lead and lift, loading , unloading etc. complete. Payment for supply of cement will be made separately as per actual consumption or approved mix proportions (nominal /design ), which ever is lower.

Drilling of bores 100 to 150mm dia. for cavity concreting through all types of soil/rock etc. with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete

Drilling holes upto 38mm dia. and upto 4000mm deep inside concrete or shotcrete or rock for contact or pressure grouting etc. with contractors men, material, consumables,tools and plants,equipments, machnieries , including all lead and lift, loading , unloading etc. complete.

Bi-Reflex Paper target points along with break off point & 500 mm long 3D monitoring bolt

Topographical markers/Survey Points

Vibrating wire type Load Cells Measuring Range: 30 T Over Range Limit: 150% with 20m cable

Portable read out units for vibrating wire type instruments

Automatic weathering station with wind speed, air temperature, rainfall, relative humidity

BoQ_Ver4.0

Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

PACKAGE-1 CIVIL WORK PART A (BARRAGE AND INTA

NUMBER #

1)OPEN/SURFACE EXCAVATION & UNDER GROUND EXCAVATION /As per Technical Specification (SECTION B.2 & B.3)

1.1) Common Excavation all other open structure /As per Technical Specification(2.3.1/2.4.3/2.10.1/2.10.3)

1.2)Hard Rock Excavation requiring blasting /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

1.3) Underground Excavation //As per Technical Specification (3.8.1/3.8.2/3.15.1/3.15.2)

2) ROCK SUPPORTS FOR OPEN/SURFACE EXCAVATION & UNDER GROUND EXCAVATION /As per Technical Specification (SECTION B.4 )

2.1)Rock anchors(25 mm dia ) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

2.1.1) Length up to 6 m

2.1.2) Length more than 6 m

2.2)Rock anchors (32mm dia.) cement grouted including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.2/4.10.1/4.10.2)

2.2.1) Length up to 6 m

2.2.2) Length more than 6 m

2.3) Rock bolts ( Resin end anchorage and cement grouted) 25mm dia. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

2.3.1) Length up to 6 m

2.3.2) Length more than 6 m

2.4) Rock bolts (Resin end anchorage and cement grouted) 32mm dia. /As per Technical Specification (4.5.3/4.10.1/4.10.2)

2.4.1) Length up to 6 m

2.4.2) Length more than 6 m

2.5) Rock Bolt / Rock Anchor Extensions into Concrete (4.5.7/4.10.2)

2.6) Self Drilling Anchor R25 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

2.6.1) Length up to 6 m

2.6.2)Length more than 6 m

2.7 )Self Drilling Anchor R32 including cost of drilling holes,grouting materials,other materials,labour,T&P,completed in all respect /As per Technical Specification (4.5.8/4.10.1/4.10.2)

2.7.1)Length up to 6 m

2.7.2) Length more than 6 m

2.8) Chain link fabric /As per Technical Specification (4.7.1/4.10.4.1)

2.9) Welded wire mesh /As per Technical Specification (4.7.2/4.10.4.2)

2.10) Permanent Steel support in pressure shaft underground works under scope of power house /As per Technical Specification (4.8/4.10.5.1)-Steel Ribs

2.11 )Lattice Girders in pressure shaft underground works under scope of power house /As per Technical Specification (4.8.2/4.10.5.1)

2.12 )Steel Lagging in pressure shaft underground works under scope of power house/As per Technical Specification (4.8.4/4.10.5.2)

2.13) Precast Reinforced Concrete lagging in pressure shaft underground works under scope of power house /As per Technical Specification (4.8.4/4.10.5.2)

2.14) Forepoling using Reinforcement Bars in pressure shaft underground works under scope of power house/As per Technical Specification (4.9.1/4.10.6)

2.15) Pipe Roofing using Reinforcement Bars and Structural Steel in pressure shaft underground works under scope of power house/As per Technical Specification (4.9.2/4.10.6.3)

2.15.1 ) 50 Dia. Medium MS pipe

2.15.2) 75 Dia. Medium MS pipe

4.15.2) 75 Dia. Medium MS pipe

3.SHOTCRETE / GUNITING /As per Technical Specification (B.5)

3.1)Plain shotcrete /As per Technical Specification(5.1 to 5.17)

Supply, installation and monnitoring by Piezometer

4.)FILL,BACKFILL,RIPRAP AND PITCHING/As per Technical Specification (SECTION B.6)

4.1)Random backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

4.2)Compacted backfill including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.3/6.10/6.11)

4.3)Graded/ Inverted Filter including cost of backfill materials,labour and T&P complete in all respect/As per Technical Specification (6.5/6.10/6.11)

4.4)Stone pitching /As per Technical Specification (6.6/6.10/6.11)

5.)DRILLING AND GROUTING /As per Technical Specification (SECTION B.-7)

5.1)Drilling for Contact/consolidation grouting including labour and T&P complete in all respect/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

5.2)Grouting operation for contact/consolidation grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.9.1/7.9.2/7.9.3/7.9.4/7.9.5/7.9.6)

5.3)Grouting materials for consolidation including cost of cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

2.1.2) For Rock Class D & E

2.1.3) Extra for excvation in pressure shaft/surge shaft/penst

5.4)Drilling for curtain grouting including labour and T&P complete in all respect /As per Technical Specification(7.8.2.1/7.8.4.6/7.9.7)

5.5)Grouting operation for curtain grouting including labour and T&P complete in all respect (Shifting of Equipments)/As per Technical Specification (7.8.2.1/7.8.4.6/7.9.7)

5.6)Grouting materials for Curtain grouting incuding cost cement,sand,admixtures,micro/ultra fine cement and bentonite as per design mix/As per Technical Specification (7.6/7.7/7.9.1/7.9.6) (1 Bag = 50kg of Cement)

4.15.3) Supply, drilling hole, installation and grouting of pre-support elements (Pipe roofing) up to 114.3mm OD and up to 15m long with conventional drilling techniques at a shallow look out angle from the tunnel axis with specialised drill bit and casing systems providing direction control and installation accuracy as per approved drawings and Specifications or as directed by Engineer, with contractors men, material, consumables including grout coupling, plants, equipments, machineries, including all lead & lifts loading , unloading etc required for the complete job.

5.7)Drilling of drainage hole/probe hole 76mm dia. /As per Technical Specification (7.8.2.1/7.9.9)

5.8)Perforated PVC pipes 50mm dia in drainage holes /As per Technical Specification (7.9.9)

5.9)Drilling of Exploratory Holes / Instrumentation/ Check holes etc. /As per Technical Specification (7.8.2.2)

5.9.1)Drilling Nx/Hx size exploratory hole with core recovery /As per Technical Specification (7.8.2.2/7.9.10)

5.9.2)Drilling Nx/Hx size exploratory hole without core recovery /As per Technical Specification (7.8.2.2/7.9.10)

5.10) Embedded pipes & fittings /As per Technical Specification (7.4.4/7.9.13)

5.11)Water pressure test/Lugeon Test as per IS:6066 /As per Technical Specification (7.8.3/7.4.3/7.9.12)

6.)CONCRETE in Powerhouse foundation, slab,beam,column,spiral casing,machine hall,control building,TRC,service bay,transformer etc.(including cost of dewatering,formwork ,cement,sand,admixtures,micro/ultra fine cement, air entraining agent and bentonite as per design mix etc.)/As per Technical Specification (SECTION B.9)

6.1)Concrete of grade M15/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.2)Concrete of grade M15/A20/As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.3)Concreting of grade M20/A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.4)Concrete of grade M20/ A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.5)Concrete of grade M25 /A40 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.6)Concrete of grade M25 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.17)

6.7)Concrete of grade M35 /A20 /As per Technical Specification (9.5/9.16.1/9.16.2/9.16.10/9.17.1)

6.8)Porous concrete /As per Technical Specification (9.16.14/9.17)

6.9)Plums(stone) in concrete including cost of stones,labour and T&P but excluding cost of concrete as per design mix /As per Technical Specification (9.17.15)

6.10)Non shrinkage epoxy grout/As per Technical Specification (9.16.11/9.17.8)

6.11)Non shrinkage pourable cementious grout/As per Technical Specification (9.16.11/9.17.8)

Supply, installation and monnitoring by PC pressure cells

7.REINFORCING STEEL /As per Technical Specification (SECTION B.11)

7.1)Providing, fabricating and placing in position HYSD reinforcement steel for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, binding with 1.25mm diameter annealed steel wire, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (11/11.10)

7.2)Providing and fixing Couplers of 32mm dia and more including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (11.7/11.12)

8.WATERSTOPS /As per Technical Specification (SECTION B.12)

8.1)PVC water stops 300mm wide /As per Technical Specification (12.5.1/12.7)

8.2)PVC water stops 150mm wide /As per Technical Specification (12.5.1/12.7)

8.3)Bituminous coating /As per Technical Specification (12.5.5/12.7)

9.)METAL WORKS /As per Technical Specification (SECTION B.13)

9.1)Providing and fixing G.I Pipe up to 100mm dia including cost of all materials,labour,T&P etc for proper completion of work /As per Technical Specification (13.5.2/13.9.2)

9.2)Providing and fixing G.I Pipe above 100mm dia including cost of all materials,labour,T&P etc for proper completion of work/As per Technical Specification (13.5.2/13.9.2)

9.3)Embedded Metal Works, Miscellaneous steel sections including frames, gratings, covers,climbing irons (rungs), etc /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

9.4)Hand rails/Railing /Ladders /As per Technical Specification (13.7.4/13.7.5/13.7.6/13.9.5/13.9.6)

9.5)Erection of Metal works supplied by others /As per Technical Specification (13.8/13.9.10)

9.6)Supply and Erection of MS Earthing bar/flat and risers /As per Technical Specification (13.7.2/13.7.3/13.7.6/13.9.3/13.9.4/13.9.6)

9.7)Providing, fabricating and placing in position the roof truss and supporting structural steel works for the powerhouse building including cleaning, straightening, cutting, bending, hooking, lapping, binding, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts. /As per Technical Specification (13.7.8/13.9.8)

9.8)Providing, fabricating and placing in the position special formwork/shuttering for Barrel concreting in Powerhouse building as per GFC drawings including cleaning, straightening, cutting, bending, hooking, lapping, binding, welding wherever required, including cost of all materials, machinery, labour, complete and as directed with all leads and lifts but exclusive the cost of scarp generated after dismanteling.(after dismanteling the scrap of barrel shuttering shall be the property of contractor)/As per Technical Specification (13.7.8/13.9.8)

10.)MISCELLANEOUS AND ANCILLARY WORKS, SLOPE PROTECTION /As per Technical Specification (SECTION B.15 & B16)

10.1)Gabions /wire crate with boulders filling including all materials./As per Technical Specification (16.3/16.8.2/16.8.3)

10.2)PVC pipes including all labour and T&P required for proper completion /As per Technical Specification (15.5/15.7.5)

10.2.1)75mm nominal dia. /As per Technical Specification (15.5/15.7.5)

10.2.2)100mm nominal dia./As per Technical Specification (15.5/15.7.5)

10.2.3)150mm nominal dia./As per Technical Specification (15.5/15.7.5)

10.3)Random rubble masonry (wet) /As per Technical Specification (16.4.1/16.8.4)

10.4)Random rubble masonry (dry) /As per Technical Specification (16.4.2/16.8.5)

11)PERMEATION GROUTING (SEEPAGE CUT-OFF WORKS) /As per Technical Specification (SECTION B.19)

11.1)Drilling 136-172 mm dia holes by rotary/odex/percussion drilling including cost of all materials,labour,T&P etc for proper completion of work./As per Technical Specification Item (19.4.4/19.5.1)

11.2)Supply and installation of TAM pipe/perforated grout casing pipe of internal dia 45-65 mm including cost of bentonite,materials,labour,T&P etc for proper completion of work. /As per Technical Specification (19.4.8/19.5.1)

11.3)Permeation Grouting to attain the desired lugeon value including cost of cement,sand,ultra fine cement, sodium silicate, Bentonite,admixtures,all labour,equipment,T&P etc but excluding cost of drilling,cost of TAM pipe and shifting operation cost of equipments(1 Bag = 50kg of Cement)./ As per Technical Specification (19.4.7/19.5.1)

7.3.2) Using Micro-by-Ultrafine Cement

12.1.1) Using Gabion/Wire Crate

11.4)Grouting operation for permeation grouting (Shifting of Equipments)/As per Technical Specification (19.4.8 & 19.4.9/19.5.1)

Supplying and fixing of 100 to 150mm dia. MS pipe ('C' class) in bore holes for cavity concreting/ fixing with contractors men, material, consumables,tools and plants,equipments,machnieries , including all lead and lift, loading , unloading etc. complete.(Weight shall be calculated by material volume X denisty of MS steel 7850 kg/m³)

Trash racks suitable for each opening of intake structure 7.8 m wide x 13.70 m height (inclined height) size complete in all respects as per scope of works and technical specifications.

Hydraulically operated trash rack cleaning machine complete in all respect along with bucket, control devices, rails and fixtures ,grapple hoist, cable reeling drum along with tool kits,hydraulically operated Trash disposal trolley etc. as per scope of works and technical specifications.

Electrically operated fixed underslung rope drum rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

BoQ_Ver4.0

4.16) Supply & installation of 20 T capacity cable anchor including cost of drilling of required diameter hole (minimum 125mm diameter and depth 15- 30m) HT strand, Sheathing pipes, spacers, centerlisers etc for proper completion of work /As per Technical Specification (4.6)

Fixed wheel vertical lift type Silt flushing gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

2.16) Supply & installation of 20 T capacity cable anchor including cost of drilling of required diameter hole (minimum 125mm diameter and depth 15- 30m) HT strand, Sheathing pipes, spacers, centerlisers etc for proper completion of work /As per Technical Specification (4.6)

NUMBER #

Erection, Testing & Commissioning of Electrically operated fixed underslung rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

3.2)Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

Erection, Testing & Commissioning of Trash racks suitable for each opening of intake structure 7.8 m wide x 13.70 m height (inclined height) size complete in all respects as per scope of works and technical specifications.

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

3.10) Pre stressed cable anchor, up to 30.00 m long /As per Technical Specification (4.6/4.10.1/4.10.3)

3.11) Pre stressed cable anchor, above 30.00 m /As per Technical Specification (4.6/4.10.1/4.10.3)

Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Erection, Testing & Commissioning of Hydraulically operated trash rack cleaning machine complete in all respect along with bucket, control devices, rails and fixtures ,grapple hoist, cable reeling drum along with tool kits, hydraulically operated Trash disposal trolley etc. as per scope of works and technical specifications.

Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Erection, Testing & Commissioning of Instrumentation system complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

STOPLOG GATE WITH GANTRY CR

ANE AND LIFTING BEAM

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 2.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

INTAKE STOPLOG GATE WITH ROPE DRUM HOIST

ANE AND LIFTING BEAM

Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 3.9 of Particular Technical Specifications.

INTAKE SERVICE GATE WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

ANE AND LIFTING BEAM

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

2.1) Common Excavation in all types of soil//soft rock for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.1/2.4.3/2.10.1/2.10.3)

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

2.2) Hard Rock Excavation incl. blasting for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Mandatory Spare parts in accordance with clause 4.9 of Particular Technical Specifications

INTAKE TRASH RACK AND TRCM

First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

ADIT PLUG GATE

Tunnel Hazard works /As per Technical Specification (SECTION B.3 ).

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

SURGE SHAFT GATES WITH ROPE DRUM HOIST

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

11.5) Supplying, fitting and fixing of Fixed Bearing in position true to line and bearing (Excluding Cost of Bearing) consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel against mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements /As per Morth specification

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 7.9 of Particular Technical Specifications.

11.6) Supplying, fitting and fixing of Free Bearing in position true to line and bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel against mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements /As per Morth specification

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

DRAFT TUBE GATES WITH ROPE DRUM HOIST

Rubber seals in accordance with scope of work, GTS and PTS

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Erection, Testing & Commissioning of Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

11.7) Supplying, fitting and fixing of Longitudinal Bearing in position true to line and bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel against mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements/As per Morth specification

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 8.9 of Particular Technical Specifications.

7.8) High performance concrete(HPC) M60 including cost of cement , all admixtures ,aggregate, labour and T&P complete in all respect/As per Technical Specification (9.5/9.5.2/9.17.2)

Rubber seals in accordance with scope of work, GTS and PTS

FISH LADDER GATE WITH ELECTRICALLY OPERATED SCREW ROD HOIST

ANE AND LIFTING BEAM

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 9.9 of Particular Technical Specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for silt flushing gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 10.9 of Particular Technical Specifications.

MANDATORY TOOL & TACKLES

Mandatory Tools & Tackles as per scope of works, GTS & PTS

PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Power, Control, Instrumentation cables etc.

itemH1Code297

Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

BoQ_Ver4.0

Erection, Testing & Commissioning of Radial gate with flap gate for a clear opening size of 15 m (w) x 20.3 m (h) including flap of size 9 m (w) x 1.8 (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, rubber seal (bottom and sides etc) assemblies & seal seat for flap gate, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

KE) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

11.8) Supplying, fitting and fixing of Transverse Bearing in position true to line and bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel against mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements/As per Morth specification /As per Morth specification

3.2)Steel fibre reinforced shotcrete (SFRS) including steel fibre /As per Technical Specification (5.1 to 5.17)

Erection, Testing & Commissioning of Trash racks suitable for each opening of intake structure 7.8 m wide x 13.70 m height (inclined height) size complete in all respects as per scope of works and technical specifications.

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

3.10) Pre stressed cable anchor, up to 30.00 m long /As per Technical Specification (4.6/4.10.1/4.10.3)

3.11) Pre stressed cable anchor, above 30.00 m /As per Technical Specification (4.6/4.10.1/4.10.3)

Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Erection, Testing & Commissioning of Hydraulically operated trash rack cleaning machine complete in all respect along with bucket, control devices, rails and fixtures ,grapple hoist, cable reeling drum along with tool kits, hydraulically operated Trash disposal trolley etc. as per scope of works and technical specifications.

Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Erection, Testing & Commissioning of Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 1.9 of Particular Technical Specifications.

Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

STOPLOG GATE WITH GANTRY CR

ANE AND LIFTING BEAM

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

4.2) Colcrete (Cement mortar 1:3)/As per Technical Specification (6.8/6.10/6.11)

Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 2.9 of Particular Technical Specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

INTAKE STOPLOG GATE WITH ROPE DRUM HOIST

ANE AND LIFTING BEAM

Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 3.9 of Particular Technical Specifications.

INTAKE SERVICE GATE WITH ROPE DRUM HOIST

Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

ANE AND LIFTING BEAM

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

2.1) Common Excavation in all types of soil//soft rock for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.1/2.4.3/2.10.1/2.10.3)

Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

2.2) Hard Rock Excavation incl. blasting for Barrage/ Intake and all other open structure /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Mandatory Spare parts in accordance with clause 4.9 of Particular Technical Specifications

INTAKE TRASH RACK AND TRCM

First stage inserts and embedded parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 5.9 of Particular Technical Specifications.

ADIT PLUG GATE

Radial gate with flap gate for a clear opening size of 15 m (w) x 20.3 m (h) including flap of size 9 m (w) x 1.8 (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, rubber seal (bottom and sides) assemblies & seal seat for flap gate, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

SURGE SHAFT GATES WITH ROPE DRUM HOIST

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

Stop log units of vertical fixed wheel type gate for a clear opening size of 15 m (W) x 20.3 m consists of 11 units/panels (nine interchangeable units & one non-interchangeable top and bottom unit) complete with skin plate, stiffeners, horizontal girders, end vertical girders, roller, guide rollers, lifting & latching arrangement, filling valves in top unit, etc. as per scope of work and technical specifications.

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 6.9 of Particular Technical Specifications.

Rubber seals in accordance with scope of work, GTS and PTS

Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 7.9 of Particular Technical Specifications.

Radial Gates with Hydraulic Hoists .

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

DRAFT TUBE GATES WITH ROPE DRUM HOIST

Rubber seals in accordance with scope of work, GTS and PTS

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Erection, Testing & Commissioning of Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies,guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 8.9 of Particular Technical Specifications.

7.8) High performance concrete(HPC) M60 including cost of cement , all admixtures ,aggregate, labour and T&P complete in all respect/As per Technical Specification (9.5/9.5.2/9.17.2)

Rubber seals in accordance with scope of work, GTS and PTS

FISH LADDER GATE WITH ELECTRICALLY OPERATED SCREW ROD HOIST

ANE AND LIFTING BEAM

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 9.9 of Particular Technical Specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for silt flushing gate as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 10.9 of Particular Technical Specifications.

MANDATORY TOOL & TACKLES

Mandatory Tools & Tackles as per scope of works, GTS & PTS

PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

Main distribution board and feeder panel for all HM equipment at Barrage complex / Intake gates / surge shaft gates / Draft tube gates and powerhouse with necessary auxiliaries as per scope of works and technical specifications.

Power, Control, Instrumentation cables etc.

itemH1Code297

Illumination of all gate decks and hoists etc. as per scope of work and technical specifications.

Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

BoQ_Ver4.0

Erection, Testing & Commissioning ofStop log units of vertical fixed wheel type gate for a clear opening size of 15 m (W) x 20.3 m consists of 11 units/panels (nine interchangeable units & one non-interchangeable top and bottom unit) complete with skin plate, stiffeners, horizontal girders, end vertical girders, roller, guide rollers, lifting & latching arrangement, filling valves in top unit, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

PACKAGE-II HM WORK PRICE SCHEDULE-1 (Supply Plant and Equipment including Mandatory Spare Parts and Tools & Instruments) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Earthing of all gates, hoists and electrical system etc. as per scope of work and technical specifications.

Instrumentation system complete in all respect as per scope of work and technical specifications.

Fixed wheel vertical lift type Draft Tube gates for a clear opening of 4.75 m(w) x 5.06 m (h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies,guide shoes, lif

Mandatory Spare parts in accordance with clause 12.18 of Particular Technical Specifications..

INSTRUMENTATION & CONTROL SYSTEM

500 kVA, 415V, 0.80 P.F. 50Hz, 3 phase, CPCB 4 Plus silent diesel generator complete in all respect as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 13.12 of Particular Technical Specifications..

RADIAL GATES WITH HYDRAULIC HOIST

Erection, Testing & Commissioning of Radial gate for a clear opening size of 15 m (w) x 20.3 m (h) complete with structural steel skin plate, horizontal girders, vertical stiffeners, inclined arms, bracings, trunnion assemblies, guide rollers, lifting brackets, anchors, trunnion brackets, dogging arrangement, access ladder with hand railing and safety cage, walkway platform between piers etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, wall plates, top seal seat with anchor bolts, nuts & washers and full-length anchors for trunnion brackets, anchors for steel support beam for hoist, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Single acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories such as cylinder support steel beam with bracket and connecting pin, self-lubricating bearing for either ends, gate position indicator and sensor/limit switches for operation of radial gates and other associated components required for the erection and commissioning etc.as per scope of work and technical specifications.

Erection, Testing & Commissioning of Independent hydraulic power pack assembly & control system including oil tank, hydraulic oil, seamless piping between power pack and cylinders and pipe fittings/ supports and other accessories like flexible pressure hoses, pipe connectors, ball valves, heavy duty pipe clamps, lighting and other fittings etc. complete in all respects for operation of hydraulic hoists as per scope of work and technical specifications.

Erection, Testing & Commissioning of Double acting twin cylinders hydraulic hoist of adequate stroke/capacity including all the accessories, hydraulic power pack & control system for smooth operation of flap gate including motor, pump, control panel, piping, pressure gauges, flow control valves, pressure switches etc. with controls, manual controls, limit switches and other fittings etc. as per scope of work and technical specifications..

Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

ting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of Local electrical control panel for each hoist including all components, instruments, enclosure, ducts, cabling between local control panel & hydraulic power pack, etc. complete in all respects for operation of Hydraulic Power Pack as per scope of work and technical specifications.

Erection, Testing & Commissioning of Earthing of all gates, hoists and electrical system etc. as per scope of work and technical specifications.

Testing & Commissioning of Trolley mounted (mobile) gasoline engine complete with control and accessories as per scope of work and technical specifications.

Testing & Commissioning of Flushing cum filtering unit complete with control and accessories as per scope of work and technical specifications.

Testing & Commissioning of Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Testing & Commissioning of Low vacuum dehydration and degasification unit complete with control and accessories including One (01) unit of contamination checking kit as per scope of work and technical specifications.

Mandatory Spare parts in accordance with clause 12.18 of Particular Technical Specifications..

Erection, Testing & Commissioning of Rubber seal (bottom and sides) assemblies in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and storage pit as per scope of work and technical specifications.

Erection, Testing & Commissioning of Lifting beam of adequate capacity with automatic engaging / disengaging device complete with frame, guides, pulleys, bearings, counterweight and other accessories, etc. as per scope of work and technical specifications.

Testing & Commissioning of Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated travelling gantry crane with cross-travel arrangement, pendent operated of adequate capacity along with necessary structural, mechanical and electrical control equipment including gantry track rails (extended up to parking/embedded parts/end stoppers, counterweight and other accessories complete in all respects for safe operation of spillway stoplogs along with lifting beam as per scope of work and technical specifications.

Erection, Testing & Commissioning of Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Intake Stoplog Gate for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels, filling valve and other components as per scope of work and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Testing & Commissioning of Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

10.3) 600mm Dia MS Pipe for raprian flow release with boulder protection strainer on u/s face (For Maximum Pressure of 5 kg/cm2)

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Intake Service Gates for a clear opening size of 5.80 m(w) x 7.0 m (h) complete with skin plate, vertical girders, stiffeners, horizontal girders, wheels and other components as per scope of work and technical specifications.

Erection, Testing & Commissioning of First stage embedded parts (anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist supporting structure as per scope of work and technical specifications.

10.4) Flow Regulating Valve 600mm Dia (For Maximum Pressure of 5 kg/cm2)

INTAKE TRASH RACK AND TRCM

Erection, Testing & Commissioning of Second stage embedded parts complete with sill beam, seal seats, wheel tracks, guides, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of work and technical specifications.

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of work and technical specifications.

ADIT PLUG GATE

Fixed wheel vertical lift type Fish ladder gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies,guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of First stage inserts and embedd

ed parts in the primary concrete to facilitate erection of second stage embedded parts., complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

Fixed wheel vertical lift type Silt flushing gate for a clear opening of 2.0 m(w) x 2.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies,guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of First stage inserts and embedd

Erection, Testing & Commissioning of First and second stage embedded parts such as bottom and top-level seal seats, side seal seat cum bearing plate, anchor bolts, nuts & washers, and erection hooks for hinged gate as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts like guides, bottom base, etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Mandatory Spare parts in accordance with clause 7.9 of Particular Technical Specifications.

Radial Gates with Hydraulic Hoists .

Erection, Testing & Commissioning of First stage inserts and embedd

Erection, Testing & Commissioning of Rubber seals in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of First stage embedded parts(anchors) in the primary concrete to facilitate erection of second stage embedded parts of gate and hoist trestles as per scope of works and technical specifications.

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Steel gate of hinged type HRT adit plug gate for a clear opening of 2.5 m (w) x 2.5 m (h) with skin plate, horizontal girders, vertical stiffeners and end verticals and locking and sealing arrangement as per scope of works and technical specifications.

Erection, Testing & Commissioning of Redundant AC-DC and / or DC-DC convertors along with 24V sub-distribution DC distribution boards etc. as per scope of work and technical specifications.

Fixed wheel vertical lift type Surge shaft gates for a clear opening of 5.0 m(w) x 5.0 m(h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Erection, Testing & Commissioning of First stage inserts and embedd

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for surge shaft gate as per scope of works and technical specifications.

1.2) Hard Rock Excavation requiring blastingfor all other open structure /As per Technical Specification (2.3.2/2.4.4/2.10.1/2.10.4)

Erection, Testing & Commissioning of Lifting beam with automatic engaging / disengaging hooks etc complete in all respect as per scope of works and technical specifications.

Testing & Commissioning of Hydraulic oil filtering unit complete with all accessories, equipment, instruments etc.

along with all necessary accessories like lugs, cable trays etc as per scope of work and technical specifications.

Erection, Testing & Commissioning of Electrically operated rope drum hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Local Control Panel for each hoist including all components, instruments, enclosures, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Rubber seal (bottom, sides, top and corners) assemblies in accordance with scope of work, GTS and PTS

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides upto deck level, top seal seat, anchor bolts, nuts & washers for draft tube gate as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for fish ladder gate as per scope of works and technical specifications.

Erection, Testing & Commissioning of Elecrically operated screw rod hoist of adequate capacity with central drive unit, end gear boxes, wires, pully/sheaves, including manual operating gear box assembly with removable cover, gate position indicator with limit switches, and local control panel, cabling, hoist supporting structure along with trestles, platform, anchorage, ladder, hand railing, etc. complete in all respect as per scope of works and technical specifications.

Erection, Testing & Commissioning of Second stage embedded parts such as sill beam, roller tracks and side seal seats, side guides up to deck level, top seal seat, anchor bolts, nuts & washers for silt flushing gate as per scope of works and technical specifications.

itemH1Code297

Erection, Testing & Commissioning of PLC based remote control sysytem complete with all accessories to operate,control and monitor individual radial gates from Barrage Control Room as per scope of work and Technical specifications.

BoQ_Ver4.0

Erection, Testing & Commissioning ofStop log units of vertical fixed wheel type gate for a clear opening size of 15 m (W) x 20.3 m consists of 11 units/panels (nine interchangeable units & one non-interchangeable top and bottom unit) complete with skin plate, stiffeners, horizontal girders, end vertical girders, roller, guide rollers, lifting & latching arrangement, filling valves in top unit, etc. as per scope of work and technical specifications.

Erection, Testing & Commissioning of Fixed wheel vertical lift type Draft Tube gates for a clear opening of 4.75 m(w) x 5.06 m (h) with skin plate, stiffeners, horizontal girders, end vertical girders, wheel assemblies, guide shoes, lifting arrangements, dogging/latching arrangement and filling valves etc. complete in all respects as per scope of works and technical specifications.

Name of the Bidder/ Bidding Firm / Company :

Erection, Testing & Commissioning of 500 kVA, 415V, 0.80 P.F. 50Hz, 3 phase, CPCB 4 Plus silent diesel generator complete in all respect as per scope of work and technical specifications.

NUMBER #

itemH1Code308

itemH1Code309

itemH1Code310

Recommended Spare parts

Recommended Spare part 1

Recommended Spare part 2

Recommended Spare part 3

Recommended Spare part 4

Recommended Spare part 5

Recommended Spare part 6

Recommended Spare part 7

Recommended Spare part 8

Recommended Spare part 9

Recommended Spare part 10

Recommended Spare part 11

Recommended Spare part 12

Recommended Spare part 13

Recommended Spare part 14

Recommended Spare part 15

Recommended Spare part 16

Recommended Spare part 17

Recommended Spare part 18

Recommended Spare part 19

Recommended Spare part 20

Recommended Spare part 21

Recommended Spare part 22

Recommended Spare part 23

Recommended Spare part 24

Recommended Spare part 25

Recommended Spare part 26

Recommended Spare part 27

Recommended Spare part 28

Recommended Spare part 29

Recommended Spare part 30

Recommended Spare part 31

Recommended Spare part 32

Recommended Spare part 33

Recommended Spare part 34

Recommended Spare part 35

Recommended Spare part 36

Recommended Spare part 37

Recommended Spare part 38

Recommended Spare part 39

Recommended Spare part 40

Recommended Spare part 41

Recommended Spare part 42

Recommended Spare part 43

Recommended Spare part 44

Recommended Spare part 45

Recommended Spare part 46

Recommended Spare part 47

Recommended Spare part 48

Recommended Spare part 49

Recommended Spare part 50

Recommended Spare part 51

Recommended Spare part 52

Recommended Spare part 53

Recommended Spare part 54

Recommended Spare part 55

Recommended Spare part 56

Recommended Spare part 57

Recommended Spare part 58

Recommended Spare part 59

Recommended Spare part 60

Recommended Spare part 61

Recommended Spare part 62

Recommended Spare part 63

Recommended Spare part 64

Recommended Spare part 65

Recommended Spare part 66

Recommended Spare part 67

Recommended Spare part 68

Recommended Spare part 69

Recommended Spare part 70

Recommended Spare part 71

Recommended Spare part 72

Recommended Spare part 73

Recommended Spare part 74

Recommended Spare part 75

Recommended Spare part 76

Recommended Spare part 77

Recommended Spare part 78

Recommended Spare part 79

Recommended Spare part 80

Recommended Spare part 81

Recommended Spare part 82

Recommended Spare part 83

Recommended Spare part 84

Recommended Spare part 85

Recommended Spare part 86

Recommended Spare part 87

Recommended Spare part 88

Recommended Spare part 89

Recommended Spare part 90

Recommended Spare part 91

Recommended Spare part 92

Recommended Spare part 93

Recommended Spare part 94

Recommended Spare part 95

Recommended Spare part 96

Recommended Spare part 97