Supply, erection, testing & commissioning of 66kV M/C Line on ACSR Panther Conductor for (1) LILO of existing 66kV Gandhidham B - FTZ Line to proposed 220kV Padana Substation D/C line on M/C tower and (2) LILO of existing 66kV Mithirohar IFFCO line top to 220kV Padana Substation D/C line on M/C tower having route length of 9.595rkm under KSY under Anjar circle.”

Sr. No. Description of Works - SAC Code 9954 Amount in Rs.

PART -A Supply of Materials

Erection of Line

TOTAL F.O.R. COST WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL END COST WITH GST

I am / we are willing to carry out this service package of works contract stated above at GST 18% (in figure)

______ % (in words _____ %) below / above the estimated TOTAL END COST for all the items stated there

The amount of tender works out with above % (in figure) for TOTAL END COST Rs. _____________ (in

I / we confirm that our above quoted rates are ON firm price basis; except supply of tower materials (including

nut-bolts) for which Price variation will be applicable.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better

economical management and for the ease of Accountancy but the entire Contract, is to be assessed under GST Law,

as the Works Contract Service, which is, as per the provisions of Section 2(30), read with, Section 2(119), further read

with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar provisions, applicable

under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of Tax, at the

rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different segments

or portions of the Works Contract, may be specified separately, in the Supplies, with a final common Classification

Code of Works Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is

relavant for the purpose of contract since the contract is works contract and any separation in the works is for better

management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency

purpose which shall have no bearing on price or taxation payment.

Signature of Authorized Representative of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

FOR REFERENCE ONLY

Supply, erection, testing & commissioning of 66kV M/C Line on ACSR Panther Conductor for (1) LILO of existing 66kV Gandhidham B - FTZ Line to proposed 220kV Padana Substation D/C line on M/C

tower and (2) LILO of existing 66kV Mithirohar IFFCO line top to 220kV Padana Substation D/C line on M/C tower having route length of 9.595rkm under KSY under Anjar circle.

Route length - 9.595 kM

Unit Freight, Unit

Description of Supply with Detail Specification of HSN / SAC code FOR Total Cost

Packing & Insurance FOR Unit Rate

Sr. No. Service Package - Works Contract for identification Unit Quantity Unit Rate (Excl. GST)

Forwarding Charges in in Rs.

(SAC Code: 9954) only in Rs.

A Supply of Materials

A.1 Tower Materials

A.2 ACSR Panther Conductor KM 0.00 195373.00 2867.20 1228.80 199469.00 -

A.3 SR Insulators

A.3.1 66kV, 90kN Suspension & Tension Nos. 364 1472.00 11.20 4.80 1488.00

A.4 Insulator hardware for ACSR Panther Conductor

A.4.1 Single Suspension Nos. 336 1385.00 16.80 7.20 1409.00

A.4.2 Double Suspension Nos. 12 3907.00 34.30 14.70 3956.00

A.4.4 Double Tension Nos. 24 4378.00 51.10 21.90 4451.00

A.4.6 Mid Span Joint Nos. 64 615.00 6.30 2.70 624.00

A.4.7 Vibration Damper Nos. 672 506.00 10.50 4.50 521.00

A.4.8 Repair Sleeve Nos. 12 210.00 6.30 2.70 219.00

A.5.1 48 Fibre (DWSM) OPGW fibre Optic cable kM 9.595 172341.00 2140.60 917.40 175399.00

Installation Hardware set * & accessories for above

OPGW i.e. all cable fittings & accessories like suspension

clamps, tension clamps, vibration dampers, earthing

clamps, down lead clamps, in-line splice enclosures etc.

including; Pigtails FC-PC type)

a) Fibre Optic Approach Cable -

500 Mtrs - For 400KV S/S

(with installation hardware like ties/

clips / cleats, conduits, ducts,

supports, fittings, accessories etc).

(Any variation in quantities shall be absorbed by

TOTAL COST PART - A WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - A WITH GST

ERECTION PORTION

FOR REFERENCE ONLY

Supply, erection, testing & commissioning of 66kV M/C Line on ACSR Panther Conductor for (1) LILO of existing 66kV Gandhidham B - FTZ Line to

proposed 220kV Padana Substation D/C line on M/C tower and (2) LILO of existing 66kV Mithirohar IFFCO line top to 220kV Padana Substation D/C

line on M/C tower having route length of 9.595rkm under KSY under Anjar circle.

Route length - 9.595 kM

Description of Supply with Detail Specification of FOR Total Cost

SN Service Package - Works Contract Unit Quantity Unit Rate (Excl. GST)

(SAC Code 9954) in Rs.

B ERECTION OF LINE

The work of detail survey, preparation and

submission of profiles in 6 copies (PLSCAD as well

Detail scope of Work :-

(a) Fixing of tower as per actual requirement, site

condition and plotting of line on profile having

standard details i.e. span length, lat-long (co-

ordinate), chainage, weight and wind span, all

dimensions, scale, legends, tower spotting data

etc. as per requirement and along with all require

(c) Preparation and submission of tower schedule

as per standard require details with all the Major -

Minor crossing details in profile drawing and tower

schedule, along with due care of clearance as per

prevailing standards i.e., for all electric line with

pole, all type of track, river, pond, nala, road, canal

(d) Details of Right of Way in profile drawing. i.e.

Building, Temple, Well etc.

(g) Plotting line on TIKKA-MAP (Revenue Land

map) - Required TIKKA-MAP will be provided by

Importantly, any work other than mentioned will

align with the specific requirements outlined by the

Engineer-in-Charge.

Note : The survey report will be submit with sign

Check Survey along with plotting of line route on

village (tika) map with Coordinates including

2 detailed survey, preparation of profiles and revision kM 9.595 10859.00

in original route alignment, if any and as per

instruction of EIC.

Excavation excluding back filling, but including

shoring, shuttering, dewatering, tree cutting for -

tower footings etc. for:-

3 a) Normal soil either dry or wet / Sandy soil. CMT 1472.43 384.00

b) Black Cotton Soil either dry or wet. CMT 1719.36 763.00

d) Black cotton submerged / marine soil where

dewatering is necessary.

Installation of steel reinforcement in concrete

foundation including supply of GETCO Approved

M.S. bars, binding wire. Work also includes their

4 cutting, bending, shaping and binding with binding MT 165.239 120022.00

wire and fixing in position of TMT bars as per

drawing before the concrete work and as per

instruction of the EIC

Stub-setting with prop or template including back-

filling, during back filling dispose of excess soil and

levelling of site is to be done as per instructions of

EIC but excluding excavation and concreting etc.

for all types of towers/extensions except special

towers. (Weight of stub, cleat & template with Bolt

& Nuts of stub & template shall be counted)) up to

6 mtr extension. (SOR Part-A -6)

Concreting of foundation by M20/M15/M25 mixture

including shoring, shuttering, compaction,

dewatering etc. for normal tower / tower with

extension upto 25mtr.

After completion of concrete work, curring -

6 (watering to concerte) is to be done as per

instruction of EIC.

(Rates are inclusive of supply of GETCO approved

Grounding of towers with pipe type earthing

including excavation and back filling, with supply of

all materials like 32mm dia heavy duty 3 mtr. long

G.I. Pipe, 50 x 6 mm G.I. flat, GI bolt-nuts, with GI

spring washer, salt, charcoal etc. as per drawing

and as per instruction of EIC.

Erection of super structure upto 6 meter extension

including tree cutting, fixing of tower accessories,

attachments except ACD /DP /NP /CIP /PP and

excluding tack welding of bolts as per instruction of

EIC. This includes taking delivery of tower

materials and bolt-nuts from GETCO’s stores etc.

for normal, extension & special towers at

destination and keeping them in safe custody and

transporting the same to erection site.

Fixing of Anti-climbing devices including supply of

barbed wire as per drawing and as per instruction -

Fixing of DP / NP / PP / CIP including supply of

plates and supply of G.I. bolts-nuts & tack welding

10 as per drawings and as per instruction of EIC.

(II) For M/C Loc. 54 7268.00

Tack welding of nuts upto approx. 10 mtrs. height

OR two bottom-most panel from ground level at

11 three places on the nuts diametrically and applying Per Bolt 25500 23.00

zinc rich paint immediately after tack welding and

as per instruction of EIC.

Complete Installation of OPGW cable (24/48

fibres) including laying, providing required

hardwares, in line splices to be encased in Fibre

Optic Splice Enclosures, Laying and termination of

a fibre optic approach cable required to connect

Overhead Fiber Optic Cable (OPGW) between the

final iin line splice enclosure on the gantry/tower

and the Fibre Optec Distribution panel (FODP) to

be installed within the building at both the

substation ends as per technical specifications

Link up of OPGW Cable including all related

activities as per inst. Of EIC.

Stringing of ACSR/ AAAC 12 (Twelve) conductors

for double circuit including laying, jointing,

tensioning, clamping with armour rods, hoisting of

14 insulator string fixing of jumpers, dampers etc. & rkm 9.595 292256.00

with required tree cutting on entire length for

adequate clearances / safe charging of line, as per

instruction of EIC.

Termination and connection for making LOOP-IN-

LOOP-OUT arrangement with existing line during

specified outage including restringing of existing

conductors OR dismantalling / new stringing for

making LILO arrangements with existing line or for

15 Job work 1 153786.00

change over line as per approved LILO

arrangement in profile as per instruction of EIC in

COLD CONDITION and dismentalled materials to

be credited to near by GETCO's store or sub

station as per inst. of EIC.

Work of Painting of Line name, Location No., two

coat Painting Color code of desired length and

telephone no. on Tower Leg with letter of Gujarati

16 language using ISI marked Paint as per instruction per loc 54 1038.00

of EIC including Supply of paints and other require

a)All four legs - For 4 Nos. of Line (M/C)

TOTAL COST PART - B, SCHEDULE 01 WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - B, SCHEDULE - 01 WITH GST

1) While calculating the weight of stub-setting, the weight of stub, cleat & templetes shall also be added in stub weight.

2) Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3) The above rates are with supply of cement by the contractor.

4) The rate indicated above includes taking delivery of all stringing materials from Board / Contractor store at destination keeping them in safe custody

and transporting the same to erection site.

5) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better economical management and for the

ease of Accountancy but the entire Contract, is to be assessed under GST Law, as the Works Contract Service, which is, as per the provisions of

Section 2(30), read with, Section 2(119), further read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar

provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be subjected to levy of Tax, at the rate of 9%

CGST + 9% SGST or 18% IGST, under the GST Law. However, Classification Codes for different segments or portions of the Works Contract, may be

specified separately, in the Supplies, with a final common Classification Code of Works Contract Service.

6) The Bidder is hereby conveyed that only only SAC Code and Tax rate for supply of Service Works Contract i.e. 18% is relavant for the purpose of

contract since the contract is works contract and any separation in the works is for better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and transparency purpose which shall have no

bearing on price or taxation payment.

7) If condcutor provided by GETCO, Contractor has to retuned back empty steel drums at GETCO's store immediately on complition of stringing work

as per instruction of EIC. If fail to submit in given time period the necessary action will be imposed by concered authority.

8) The rate indicated above includes taking delivery of all stringing material from contractor store/ GETCO’s store keeping them in safe custody and

transporting the same to erection site.

9) For any crediting of material related work, agency has to submit the original gate pass copy / CR copy with required documents as per inst. and as

per requirement of EIC or when demanded.

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company