Re-Painting, Renovation, Repairing and other Misc. civil work of Utility Building, Utility Extension Building, Overhead water Tank and other areas of old building at IPR campus, Bhat, Gandhinagar -382428

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres & below

Removing dry or oil bound distemper, plastic emulsion paint, limewash, colourwash, and the like by scrapping, sand papering, grinding and preparing the surface smooth including necessary repairs to scratches etc. complete. Note:- Removing of emulsion paint, white wash, oil paint or enamel paint ,wood work, steel work etc. by sand paper, wire brush, roll paper etc. to receive fresh coat of paint is also covered under item. Rates includes scaffolding. Measurements will be done as per relevant IS Code. Complete all as directed by EIC.

Providing and applying white cement based putty two or more coat to achieve required finish on wall, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Note:-for external walls only, Rates includes scaffolding and sand papering of wall after putty. The thickness of putty should be 0.75 mm or more. Measurements will be done as per relevant IS Code

Providing and applying white cement based putty two or more coat to achieve required finish on wall, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Note:-for internal walls only, Rates includes scaffolding and sand papering of wall after putty. The thickness of putty should be 0.50 mm or more. Measurements will be done as per relevant IS Code

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound)content. With water thinnable cement primer on wall surface (or oil based primer for AC Duct only) having VOC content less than 50 grams/ litre. Note:- For Internal wall only, Rates includes scaffolding at all height. Measurements will be done as per relevant IS Code. Complete all as directed by EIC.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre including applying additional coats wherever required to achieve even shade and colour In TWO coat. Note:- Rates includes appropriate scaffolding for all height, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). Measurements will be done as per relevant IS Code. Complete all as directed by EIC.

White washing with lime (Two or more coats) to give an even shade to the surface, The work also involves Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete: Note:-White washing with lime includes required material like fevicol/adhesive, indigo etc. as per manufacturers specifications.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New /old work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, including scrapping, sand papering and preparing the surface, complete in all respect as per the direction of Engineer-in-Charge. Note:- Rates includes appropriate scaffolding for all heights, surface preparation, removing of old paint / lime washing as required, appying wire brush on existing surface, washing, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). The paint coefficient will be 1.00 irrespective of applying on plain / sand face plaster / brick surface. No extra measurement will be paid for painting on rough or sand face plaster or brick surface with groove. Complete all as directed by EIC.

Providing and Applying two coats of Synthetic enamel paint on old doors and windows, MS members using 1st quality paint from approved manufacturer of approved colour and shade to give an even shade including scaffolding, removing of old existing paint that is soft, blistered, loose or flanking & cleaning old surface, preparing the surface to receive paint including filling cracks and creaves with Putty or other approved filler materials, applying oil primer coats / anti corrosive zinc based yellow primer to steel work. cost also includes thinner, filler, putty, primer and other materials, necessary labours etc. complete as directed by Engineer in charge at all heights, in all floors. Note:- Measurements of doors and windows will be taken as per relevant IS code. Surface area of all MS Members will be taken for measurement (1) Synthetic enamel Paint of approved brand (2) Zinc based yellow Primer (3) Putty suitable to Mild steel members of approved brand (4) Putty on wood work - oil base putty.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including ecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).