SPL REP TO BLDG NO P-2/4 OTM OF 2/11 GR (SHINGO) PROVN OF RATION STORE FOR OR MESS AT 313 (I) FD WKSP AT BLDG NO 21/14 AND EXTENSION OF PARKING SHED FOR VEH PARKING FOR TROOPS AT CSD BLDG NO P-12/14 AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

All as per item No 4 above but except material complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails all as spd and directed

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.(Make Diamond /Everest/Visaka)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

S&F Non - skid Ceramic tiles 7 to 8 mm thick size of each tiles is 600 x 600 in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and . and pointed in white or coloured cement to match all as specified and directed

Ditto all as per item No 09 but on vertical surfaces over 10 mm thick rendring in CM 1:4

S &F coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

S&F coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.

M&L for Kota stone slab for stair case flooring 20-25 mm thick and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.

M&L for kota stone slab 20-25 mm thick in riser and tred single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.

M&L 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor /roof surface complete all as specified

M&L PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A'

M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 incl Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed .

M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete including Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete including Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projectionincluding Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed.

S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair CP brass wall mixer (with L bend for supply to showerr) for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 125 mm CP brass shower rose for fixing with 15mm pipe complete all as specified and directed.

S&F in repairs 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Ditto all as per above item 35 above but 20 mm bore

M&L in repairs Granite (of any type) work (table rubbed and polished) 16-18 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) complte all as specified and as directed.

S & F in repairs vitreous china hand wash basin ( OVAL IN SHAPE) white exclusive quality, size 520 X 450 X 200 MM incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and waste pipe; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as spd and directed

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as spd and directed

S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including trap set in and including concrete, connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) all as specified.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store.

-Ditto- but n.exc 1.5m2 each -ditto-.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and Ditto

Taking down shutters of any description n exc. 1 Sqm each.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, as specified and as directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, all as specified and as directed.

S&F 30 mm thickness Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as spd and directed

S & F 35mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

M&L providing factory made PVC internal door frame (PRELAM ) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm) made out of extruded 5 mm (+-).25 mm) thick PVC sheet manufactured by an ISO 9001-2008certified company and by joining 3 nos of heat bend PVC sheet section The inside section of size 90 x 30 mm shall be made from plain colour PVC sheet of 5 mm (+- o.25 mm) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25 mm) thick plain PVC sheet The frame shall be mitered cut at two corners and joined with 4 nos of 150 mm longbrackets of 15 mm x 15 mm MS square tube The two vertical door frame are tobe reinforced with 40 mm x 20mm MS square tube of 19 guage through out the frame the door shall be fixed to the wall using anchor fastners A minimum of 4 nos of screw to be provided for each vertical members and min 2 nos for horizontal members etc complete as per manufacturers specification and direction of engineers-in-charge

M&L in providing 30 mm thick factory made internal PVC flush door shutter wood free consisting of frame made out of MS tube of 19 guage thickness and size 20 mm x 40 mm for stiles as well as top bottom and lock rail MS frame shall have a coat of primer of approved make and manufacturer The inside Panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm thick wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm ) thick plain / prelam PVC sheet manufactured by an ISO 9001-2008 certified company on both side of the inside panel ALl the four edged lipping to pe painted with PVC ink of matching colour of PLAIN/PRELAM moulded PVC sheet of door 0.20 mm thick (5 mm x 4 mm ) thick PVC sheet to be given for lock provision at lock height door to be fixed with frame with 3 nos SS butt hinges of size 100 mm x 25 mm x 25 mm and 50 mm long steel screw drilled suitable for to pass through both the wall of th MS tube other hardwares could be fixed with 25 mm x 8 mm size steel screw etc complete as per direction of engineer in cahrge manufacturer specification and drawings

S&F steel window with pressed steel frame ( size 95 x 45x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bars (OPEN OUT SIDE) and wire guazed openable shutter without glazing bar( open inside) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 JAn 2002 Note:- (i) Two shutter i.e wire guazed and glazed shall be fixed in one composite frame and both shutter shall me measured as one unit (ii) Rate of filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperately under relevant items of schedule

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F 125 mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F in repairs 125 mm aluminium anodised barrel tower bolts of extruded section all as specified.

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded ..

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repairs 20 mm dia fancy type SS Curtain rod fixed with SS bracket and lattoo to wall complete as sample approved all as specified and directed by Engr - in - charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

Ditto but 3mm thick sheet glass ground or Obscured or frosted on one side and ditto

S&F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m including Hacking out old broken glass (any thickness, size, quality or description) from steel frames or fixed with beads complete all as specified and directed.

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified.

M&L for Preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75 mm bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S & F in repair 40mm dia light garde GI Pipe spout in wall, floors complete all as specified and directed.

M & L for cement concrete 1:7:12 Type F-2 using 40mm graded stone/brick aggregate as in foundation filling, mass concrete or sunkun etc complete all as specified and directed.

M & L for sunken treatment of of bath / toilet / WC etc by cleaning and removing all the loose mortar, laitance, dirt, dust etc by chisel hammer wire brush and fixing APP modified polymer membrane (weight not less than 3 kg/sqm) over a coat of bitumen not below 1.2 Kg per Sqm as primer over a coat of bitumen not below than 0.3Kg per Sqm over 15mm thick plaster in CM 1:3 with Dr fixit pidilite liquid water proofing solution 200ml per 50Kg of cement at both hozizontal and vertical surface complete all as specified and directed.

M & L for cement concrete padding of 1:2:4 using 12.5mm graded stone aggregates, 25mm thick in sunken of bath / toilet / WC/ roof slabs etc with adding water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Cost of WPC shall be deemed to inclusive in quoted unit rate.

S&F double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

M&L for applying one coat of synthetic enamel paint including preparation of old painted wooden surfaces of any description over 10 cm width or girth all as specified.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M&L for applying two coat OBD on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M&L for RCC type B1 (1:2:4), 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L form work to soffits of suspended slabs such as roof slab, landings, shelves and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

S&F in repairs 25 mm thick boarding of 2nd class hardwood as in roof facia ,Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified and as directed

S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self

S&F for steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt weld ed tubes confirming to IS 1161-1979 gde st-240,including gusset plate pole etc .

M&L Plates (plain or chequered) channels Fe 410-W (Gde E-250) quality B. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil all as spd and directed

M & L for Cement Concrete Type C-2, 1:3:6 (40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and as specified.

M & L for 75 mm thick cement concrete type C2, 1:3:6 (40mm graded aggregate) as in floors and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 100mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for Fair finished surface of concrete

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified.

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M&L mild steel TMT bars 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6 complete all as specified and directed .

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, in half brick thick walls built in setting in cement mortar 1:4 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

Supply only water proofing compound, complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators, sockets etc) removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

(b) One light point controlled by two way switch of 5/6 Amps

(c) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

(d) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

(f)All as per item 1 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&f Modular switch, white finish, 5/6 Amps, single pole, two way all as specified and directed.

S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&f electronic modular fan regulator of five stage, 80 watt any type on the existing phenolic laminated sheet AC, SP 230 Volt complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S & F white cover plate with frame modular type of 02 module complte all as specified and directed.

S & F white cover plate with frame modular type of 03 module complte all as specified and directed.

S & F white cover plate with frame modular type of 04 module complte all as specified and directed.

S & F white cover plate with frame modular type of 06 module complte all as specified and directed.

S & F white cover plate with frame modular type of 08 module complte all as specified and directed.

S & F white cover plate with frame modular type of 12 module complte all as specified and directed.

S & F metal flush box modular type of 02 module complte all as specified and directed.

S & F metal flush box modular type of 03 module complte all as specified and directed.

S & F metal flush box modular type of 04 module complte all as specified and directed.

S & F metal flush box modular type of 06 module complte all as specified and directed.

S & F metal flush box modular type of 08 module complte all as specified and directed.

S & F metal flush box modular type of 12 module complte all as specified and directed.

Supply and Fixing in repair LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing in repair LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting and including taking down old fitting complete all as specified and directed.

S&F in repair 10 W LED Lamp/bulb complete all as specified and directed.

S & F in repair 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F in repair recess mounting LED 2x2 luminaire 36Watt ceiling light with extruded aluminium housing and milky diffuser complete all as specified and directed.

S&F in repair Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including medium grade conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.

Material and Labour for earthing in repair complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&f in repair sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and Fixing in repair MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar copper tinted, 415 volts, made out of 16 guage sheet steel double door including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

S&F in repair MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar copper tinted, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar copper tinted, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix in repair MCB single pole, 240 volts, 6-32 Amps of 10 KA C Curve complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA C Curve complete all as specified and directed.

Supply and Fix in repair MCB single pole & Neutral 240 volts, 40 amps, of 10 KA C Curve complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA C Curve complete all as specified and directed.

S&F in repair MCB Triple pole & Neutral 415 volts, 63 amps, of 10 KA C Curve complete all as specified and directed.

S&f water heater storage type, electric, capacity 25 litre, BEE 5 star rated with grouting with four nuts and bolts, heating element 2.0 kw ajustable temperature setting knob for temp setting between 20 C to 75 C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation with all accessories such as safety valve, thermostate, NRV complete with chromium plated flexible two number pipe connection for hot /cold water supply.

S&f steel body exhaust fan AC heavy duty, single phase 230/240 Volt of size 300mm sweep with louvers complete all as specified and directed.

S&F PVC fresh air fan, single phase 230/240 Volt of size 250mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

M&l for cutting, opening circular/rectangular in shape hole on wall for fixing of exhaust fan of size 300/200/450 mm sweep including plastering and making good the disturbed surface and surrounding complete all as specified and directed.

S&f 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm suspention wire one twin core 10 sqmm solid conductor.

shivam builders (BID ID -3117545)

M/s J P Traders (BID ID -3114194)

basant ballabh punetha (BID ID -3116692)

M/S RAMESH SINGH ADHIKARI (BID ID -3113347)

M/S KS Shahi and Sons (BID ID -3114963)

SHAMSHER SINGH MAHAR (BID ID -3116464)

SK Traders Sons (BID ID -3116451)