JJM 2020 21 Setting up Up gradation Operation of Laboratories for WQMS Procurement of 28nos Fully Automatic Vertical Autoclave for various Quality

Amount

1JJM-2020-21-Setting up / Up-gradation /Operation of Laboratories for WQM&S-Procurement of 28nos. Fully Automatic Vertical Autoclave for various Quality Control Laboratories of Kerala Water Authority

(1) Capacity 50 Ltr minimum (2) With double wall construction and inner outer and carriers corrosion resistant Stainless Steel grade 304 (3) Sheets to be argon welded ground and polished and to be of crevice free internal (4) Lid, flanges,fly screw, crosspin,heater cover stand S.S. 304 (5) With inlet valve and outlet valve for changing with fresh water/ for cleaning (6) Operating temperature 121±3°C (7) Temperature accuracy ±0.5°C at 120°C (8) With temperature calibration function (9) With high temperature and pressure resistant silicon gasket (10) Should be electrically heated by means of I.S.I. quality immersion heaters with working pressure 15 PSI. (11) With hydraulically die pressed lid from S.S. Plate with, easy pedal lifting device (12) Should have CE certified built in analog pressure gauge with 0-400 psi for indicating actual pressure (13) With two Nos. safety valve and one Manual exhaust valve (14) With quick release coupling and handle with heater cover stand (15) PID Controller must have temperature cum timer display and 0.1o resolution (16) With Auto Purging & Exhaust (Solenoid Valve) (17) With Water level glass indicator (18) With backlit LCD display for all information including process and set values (19) With safety warnings and alarms for (a) A cycle cannot start if the door is open or not properly locked (b) The door cannot unlock until chamber pressure reaches room temperature (c) If temperature stays below 120°C for more than 5 seconds (d) If temperature does not reach the sterilization temperature during the set points (e) Over pressure cut off with audio visual alarm (f) Over current cut off with audio visual alarm (g) Low water level heater cut off and alarm (20) With end of cycle buzzer and auto reset (21) With minimum 4 perforated corrosion free baskets made of SS 304 that are stackable two high or even more levels (22) Maximum Power consumption 3 KW (23) Provide NABL calibration certificate for temperature, pressure gauges and timer (24) Provide ISO 13485,IEC 60601 or equivalent BIS certificate (25) Should be compliant with IEC 61010-1, IEC 61010-2-40 for safety (26) Hard copy of instrument manual with specification details to be submitted (27) Provide IQ,OQ and PQ documentation (28) Warranty 3 years for the entire unit