Renovation of toilet blocks in third and fourth floors of Nila Building

Amount

Dismantling tile work in floors and roofs laid in cement mortar including removal of all materials outside the Technopark campus. For thickness of tiles 10 mm to 25 mm.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site to outside Technopark Campus etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Demolishing cement concrete manually / by mechanical means as per direction of Engineer - in-Charge. Nominal concrete or richer mix of any thickness and any grade (i/c equivalent design mix).The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site to outside Technopark Campus etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Excavation by manual means inside the sunken area including getting out and disposal of excavated unservisable materials and stacking of servisable material for back fill, as directed by Engineer-in-charge. All kinds of materilas. The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris outside Technopark campus etc for all floors and all heights, complete as per the direction of engineer in charge.

Back filling with the available excavated materials (earth/cement concrete) in sunken portions. (after being confirmed by the engineer in charge) in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming/mechanical means and watering and disposing the surplus quantity outside the Technopark campus without damaging the existing structures and materials. After completion of compaction, which must be certified by the engineer in charge. The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris from work site to outside Technopark Campus etc. complete as per the direction of engineer in charge.

Providing and laying APP (Atactic Polypropylene Polymer of approved make) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufactured of density at 250C, 0.87-0.89 kg /litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc. as per the direction of engineer in charge, and preparing the surface completely. The vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 230C as 350/ 300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 1500C. Cold fexibility shall be upto -20C when tested in accordance with ASTM. D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick as per the direction of engineer in charge.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and applying fiber-reinforced elastomeric liquid waterproofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of the concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thickness of completeapplication/system not less than 500 microns). The operation shall be carried outafter scrapping and properly cleaning the surface to remove loose particles withwire brushes, complete in all respect as per the direction of Engineer-in-Charge.The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Glazed Vitrified tiles Matt/Antiskid finish of size.Size (thickness to be specified by the manufacturer) for floors with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades as per the direction and approval of engineer in charge, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with epoxy joint filler, by using a spacer of minimum of 3mm thick, complete. Size of Tile 600 x 600 mm. The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing Ist (full body charge tile) quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge but including in skirting, risers of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and including PVC corners for all projected corners and door sides and applying of epoxy joint filler, by using a spacer of minimum of 3mm thick etc. complete. The rate inclusive of all material charge, labour, transportation, Scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Dismantling doors, windows, and clerestory windows (steel, wood, or PVC) shutters and frames, including chowkhats, architrave, holdfasts, etc. complete and removal of materials outside the Technopark campus : Of area 3 sq. metres and below.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Dismantling cement asbestos or other hard board/other ceilings or partition walls fixed glazing and false ceilings of any type, including their fittings, the work includes removal and disposal of materials outside Technopark campus. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Structural steel work riveted, bolted or welded in built up sections of M.S material for fixing of washbasin, including cutting, hoisting, fixing in position, and applying a two-coat priming coat of approved steel primer all complete.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, counter top of washbaisin, urinal partition, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing mirror of superior glass ( of approved quality and make) and of required shape and size with 6mm ply backing with corners, including necessary studs of approved make and shade: Rectangular shape.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size).The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever of convinient height to operate) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing urinal basin of 375 X 390 X 590 mm sizes with standard flush pipe, self closing angle cock and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with non pvc flush tank, seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing CP Health of approved brand, faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing SS. brass long body bib cock of approved brand and quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1 mm), with wall thickness 2.0mm (0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing to existing door frames. 30 mm thick factory made uPVC door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer of approved make (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15 mm nominal bore.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete. Flexible pipe 32 mm dia.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 150 mm dia floor trap.The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. piller taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous counter top wash basin size 550 X 450 mm with single 15mm C.P. brass pillar taps. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Demolishing and removal of existing toilet and wash area fittings like piller tap, long body bib cock, angle valve, towel rad, towel ring, soap diosh, angle cock, health focet, shower like etc. complete and including the stacking of serviceable materials as per the direction of the engineer in charge and the disposal of materials outside the Technopark campus. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Demolishing or removing of wash basin and water closet with C.i brackets, 15mm C.P brass piller taps, 32mm C.P brass waste of standard pattern, including removal of fittings and brackets, cutting and making good the walls whereever required. Including the disposal of materials outside the Technopark campus. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Dismantling old plaster or skirting, raking out joints, and cleaning the surface for plaster after getting approval from the engineer in charge, including the disposal of materials outside the Technopark campus. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Dismantling granite/ marble laid in cement mortar, including disposal of debris outside the Technopark campus. For thickness of tiles 10mm to 25mm. Including the disposal of materials outside the Technopark campus. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC pipe fittings including fixing of pipe with clamps at 1.00 m spacing. This includes jointing of pipe & fittings with one step PVC solvent cement and testing of joints complete as per the direction of engineer in charge. Concealed work, including cutting chases and making good the wall etc. 50mm dia pipe. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 75mm dia Bend. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 75mm dia 45 degree Elbow. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/accessories for rigid PVC pipes, including jointing with PVC solvent cement - 75mm dia Y Bend. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing PVC moulded fittings/ accessories for rigid PVC pipes, including jointing with PVC solvent cement - 110mm dia Elbow. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete: 25mm nominal bore. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete: 32mm nominal bore. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 Sq meters and under, including cutting the patch in proper shape, racking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with cement mortar 1:4 (1 cement : fine sand). The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Providing and fixing uplasticised PVC connection pipe with brass Unions. 25 cm length and 11.5mm nominal bore. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 2Rx1.5sqmm with 1R 1.5sqmm Green wire for earthing. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of 20mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of 20mm of PVC flexible conduit along with accessories in surface. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of 20-22 W, 2500-3500k Warm white, lm/W≥80, 4 feet tube light fixture. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of 6-9 W, 2500-3500k Warm white, lm/W≥80 Recess mount LED round down light. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of 200mm,30-35 W Exhaust fan. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Mylink Two module metal flush box. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Mylink Three module metal flush box. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Mylink Two module covering plate with frame. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Mylink Three module covering plate with frame. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Mylink One module 6A One way switch. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of One module Blanking plate. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Supplying and fixing of Two module Blanking plate. The rate inclusive of all material charge, labour, transportation, scaffolding (If needed) loading/unloading at the work space and removal of debris from work site etc. for all heights upto roof top, complete as per the direction of engineer in charge.

Rohas Ventures Pvt Ltd (BID ID -2277006)

R. Sajikumar (BID ID -2278491)