Repairs and Renovation of Tea Coffee Shop and Food courts at Pahrihas, Doodhpathri and Shaliganaga

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete

P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement @ for all rcc work

FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing of aluminium windows,doors ventilators made out of 50mmx45mm section of shutters incl. rubber gascuts,aluminium beeding fitted with 5mm glass and framework of aluminium 100x50mm section fitted with all required standard

Providing and fixing of wall panel 50 mm thick (puff panel) and width 1 mtr or more insulated thick panel with 0.50mm PPGI sheet both sides with density of 40 kg/cbmtr, fixing on steel frame work with necessary flashings,screws, and all carriages of material upto site complete job

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as permanufacturers’specifications:Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA

Providing and fixing pvc pipes class c pipe incl soil waste and vent pipes make supreme and prince or equivalent.

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4)

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

P/F of Geysers 25-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)

Providing & Fixing PVC ( Prince Make) following fittings complete

Door Tee 75mm size

PVC Reducer 100x75mm

Floor Trap 100 mm size

Plain Bend 100 mm size

Plain Bend 75 mm size

Providing and supplying two benches and one table suitable for seating four persons, with the benches placed opposite each other and the table in between. Each bench shall be of size approximately 1200 mm in length, 380 mm seat depth, and 450 mm seat height without any backrest. The table shall be of size 1200 mm in length, 700 mm in width, and 750 mm in height. The upper body of the benches and table (seat and tabletop) shall be made of laminated plywood or MDF of 18–25 mm thickness with 1.0 mm decorative laminate finish and 2 mm PVC edge-banding or rounded edges. The lower body shall be fabricated from structural steel sections of minimum 40×40×2.5 mm SHS or equivalent, welded and ground smooth, finished with one coat of primer and two coats of powder coating or enamel paint in approved shade. All joints shall be rigid, and anti-skid nylon/EPDM foot pads shall be provided. The benches shall be designed to safely carry two adults each (minimum load capacity 150 kg per person), and the table shall have adequate stiffness with underside steel framing. The complete unit shall be supplied, installed, and finished as per specifications, including all carriage and handling, to the satisfaction of the Engineer-in-Charge.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box nd earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for light/power plug points (15/16A heating points) with 2x4sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC Insulated copper conductor single core cable for earthing, etc. as required. (Havells/Polycab/ Anchor/ Finolex/KEI/RR or equivalent) including the cost of conduit.

Wiring for 5-10A socket out lets for computer (Inverter) with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for earthing etc. as required.including the cost of conduit.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including conduit as required. 32mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supply and fix LED Bulb 18W,230V Energy Efficient lamp Make : PHILLIPS, SURYA, SYSKA

Supply and Fixing ceiling fan 1200mm sweep with downrod,canopy and connecting up including provision of cable withmulti stranded copper conductor cable of size 0.75 Sqmm fromceiling rose to connector of ceiling fan and connecting up complete all as specified and as directed. Make : Usha / Havells / Crompton Greaves

Supplying and fixing of MCB board with required MCBs and box, including all necessary fittings and fixtures, complete in all respects as per site requirements. The MCB distribution board shall be metallic, IP42/43-rated, double-door, surface/recessed type, suitable for single-phase/three-phase systems, prewired with copper bus bars, neutral and earth links, interconnections, and DIN rail for mounting MCBs. MCBs shall be ISI-marked, modular type, conforming to IS: 8828 (latest edition), with SP/DP/TP/TPN configurations of appropriate ratings (6A, 10A, 16A, 32A, 63A) as per load requirements. The installation shall include all necessary accessories, connectors, lugs, conduit/cable entry fittings, and proper earthing as per IS: 3043. The work shall be carried out as per standard electrical norms, ensuring proper alignment, secure mounting, and safe connections, followed by testing and commissioning to ensure proper functionality.