REPAIR REPLACEMENT AND MISC WORKS TO WATER SUPPLY SYSTEM AND INSTALLATION AT SECTOR C1 AND C2 UNDER GE UTILITY AMBALA

Amount

Attending day to day complaints lodge in complaint register or ARMAAN app of interrupted/breakdown of external water supply and repair to make the continuity of external water supply after detecting & rectifying the defect such as replacement of nipple, tee,union,socket or blockage in any pipe from 15mm to 25 mm size and other minor items such as required in order to make good the continuity of water supply to the entire satisfaction of Engineer-in-Charge. Note:- (a) This item pertains to attending complaints of external water supply such as T&P and safety tools will be the responsibility of contractor etc as required in order to attend the complaint to the entire satisfaction of user/Engineer-in-Charge. Note: Rs. 100/- per day will be recover from contractor payment if fail to rectify complaints. Necessary exacavation /digging wherever required for the rectification of complaint will be done by the contractor and no extra amount will be paid seperately.

Attending day to day complaints lodge in complaint register or on ARMAAN app of interrupted/breakdown of external water supply and repair to make the continuity of external water supply after detecting & rectifying the defect such as replacement of nipple, tee, union, socket or blockage in any pipe from 40 mm to 80 mm size and other minor items such as required in order to make good the continuity of water supply to the entire satisfaction of Engineer-in-Charge. Note:- (a) This item pertains to attending complaints of external water supply such as T&P and safety tools will be the responsibility of contractor etc as required in order to attend the complaint to the entire satisfaction of user/Engineer-in-charge. Note: Rs. 100/- per day will be recover from contractor payment if fail to rectify complaints. Necessary exacavation /digging wherever required for the rectification of complaint will be done by the contractor and no extra amount will be paid seperately.

Note for Ser Item No 1.00 & 2.00 :- (i) Fittings such as union, elbow, nipple, socket, reducers, tee and dead plug required for rectification of complaint will be measured and paid under Ser Item No 3.00. (ii) Seperate Plumber and helper will be provided for each sector (Sector 'C1' and Sector 'C2') water supply complaints , provided with required T & P and cost of the same is included in the quoted rate and no extra amount will be paid seperately and if Seperate Plumber and helper is not provided for resolving each sector water supply complaints then contractor will have to pay penalty of Rs 100/- per complaint per day and same will be deducted from rest dues.

Supply only in repair the following sizes GI specials to be fixed in existing / relaying GI tubing where required for making serviceable of the line complete all as specified and directed :-

GI union15mm

GI union 20mm

GI union 25mm

GI union 40 mm

GI union 50 mm

GI union 80 mm

GI elbow 15mm

GI elbow 20mm

GI elbow 25mm

GI elbow 40 mm

GI elbow 50 mm

GI elbow 80 mm

GI nipple 6" long 15mm

GI nipple 6" long 20mm

GI nipple 6" long 25mm

GI nipple 6" long 40mm

GI socket 15mm

GI socket 20mm

GI socket 25mm

GI socket 40mm

GI socket 50mm

GI reducer of size 50/40mm

GI reducer of size 40/25mm

GI reducer of size 25/20mm

GI TEE of size 50x50x40mm

GI TEE of size 80x80x50mm

GI TEE of size 40x40x25mm

GI TEE of size 25x25x20mm

GI dead plug size 25mm

GI dead plug size 20mm

GI dead plug size 15mm

Supply & fixing gun metal gate valves 15 mm bore with iron wheel head screwed both ends for GI pipe of the following dia of pipe including taking down old unserviceable complete all as specified and directed.

All as per Srl Item No. 4.00 here in before but 20 mm bore.

All as per Srl Item No. 4.00 here in before but 25 mm bore.

All as per Srl Item No. 4.00 here in before but 40 mm bore.

All as per Srl Item No. 4.00 here in before but 50 mm bore.

Supply, laying and testing 80 mm bore GI pipe of medium grade with all connected fittings/accessories including taking up/ down old U/s pipe complete all as specified and directed.

All as per Srl Item No. 9.00 here in before but 50 mm bore.

All as per Srl Item No. 9.00 here in before but 40 mm bore.

All as per Srl Item No. 9.00 here in before but 25 mm bore.

All as per Srl Item No. 9.00 here in before but 20 mm bore.

All as per Srl Item No. 9.00 here in before but 15 mm bore.

Supply and fix PVC float valve 20 mm dia high pressure with polythene float and fly nuts complete screwed for GI pipe including taking down old U/s valve complete all as specified and directed.

Excavation in trenches not exc 1.50 metre wide and not exc 1.50 metre deep in soft/ loose soil for laying of pipe line and getting out complete all as specified and directed.

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated soil surplus to the requirement to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Repacking / repair stuffing box of sluice valve spindle including taking apart and reassembling of size 80 to 300mm bore size complete all as specified and directed.

Taking out sluice valves refacing, regrinding and refixing including replacing spindle and check nut and make serviceable of size 80 to 300mm bore size complete all as specified and directed.

Material and Labour for repairing to existing CI/DI/GI pipe line, leakage by caulking of lead joint or any other means like fixing a clamp with rubber sheet at the place of leaking joints in running water pipe line including necessary material for 350mm/300mm/250mm /200mm bore CI/DI pipe and fitting such as clamps , D joints or any other fittings if required whill be provided by the contractor and its cost is included in the quoted item rate complete all as specified and directed.

Material and Labour for repairing to existing CI/DI/GI pipe line, leakage by caulking of lead joint or any other means like fixing a clamp with rubber sheet at the place of leaking joints in running water pipe line including necessary material for 150mm/100mm bore CI/DI pipe and fitting such as clamps ,D joints or any other fittings if required whill be provided by the contractor and its cost is included in the quoted item rate complete all as specified and directed.

Material and Labour for repairing to existing CI/DI/GI pipe line, leakage by caulking of lead joint or any other means like fixing a clamp with rubber sheet at the place of leaking joints in running water pipe line including necessary material for 80mm/50mm/40mm/25mm/20mm bore CI/DI pipe and fitting such as clamps, D joints or any other fittings if required whill be provided by the contractor and its cost is included in the quoted item rate complete all as specified and directed.

Supply and fix in replacement of foot valves of 200mm bore including rubber gaskets , nuts and bolts, washers etc complete all as specified and directed

All as per Srl Item No. 24.00 here in before but 150 mm bore.

All as per Srl Item No. 24.00 here in before but 100 mm bore.

Scraping old existing paint from pipes of different sizes or any other surfaces including making smooth surface and primer and applying two coat of synthetic enamel paint of existing/approved colour complete all as specified and directed.

Complete removal of the wild grass/ vegetation from surrounding area of OHTs, Tubeswells/Boosters and installations area and making the surface clear and plain and spraying roundup chemical on the same clean area as directed after removing and depositing the same at a distance not less than 50 mtr away from the site complete all as specified and directed. Note- All necessary T&P will be provided by the contractor and no extra amount will be paid for that seperately.

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Material and labour brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Supply and laying in trenches ductile iron pipe of 350mm bore, flanged end, K-9, ISI marked including rubber gasket for flange joint, nut, bolts and washer etc including taking up/down existing CI /DI/MS/ACC pipes with connection and connected fittings/accessories complete all as specified and directed.

All as per Srl Item No. 31.00 here in before but size 300 mm bore complete all as specified and directed.

All as per Srl Item No. 31.00 here in before but size 250 mm bore complete all as specified and directed.

All as per Srl Item No. 31.00 here in before but size 200 mm bore complete all as specified and directed.

All as per Srl Item No. 31.00 here in before but size 150 mm bore including taking down PCC/ ACC/ GI Pipe with connection and connected fittings complete all as specified and directed.

All as per Srl Item No. 31.00 here in before but size 100 mm bore including taking down PCC/ ACC/ GI Pipe with connection and connected fittings complete all as specified and directed.

Material and labour for repair of damaged road/path/surfaces by proper ramming of soil and filled with readymix road repair material and spreading the same material on road/path and then proper rolling of the road/path with roller complete all as specified and directed.

Supply and fix in replacement cast iron sluice valve PN-1.6 with flanged ends 350 mm nominal bore ISI marked complete with gun metal or stainless steel spindle and cast iron cap including rubber /fiber boared gasket nuts, washers etc , including taking out the existing complete all as specified and directed.

All as per Srl Item No. 38.00 here in before but 300 mm bore.

All as per Srl Item No. 38.00 here in before but 250 mm bore.

All as per Srl Item No. 38.00 here in before but 200 mm bore.

All as per Srl Item No. 38.00 here in before but 150 mm bore.

All as per Srl Item No. 38.00 here in before but 100 mm bore.

All as per Srl Item No. 38.00 here in before but 80 mm bore.

Supply and fix in ductile iron fittings for spigot and socket /fanged pipe such as bends (any type radius and angle) tapers any type ( straight, bends, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch , cross collers , caps and plugs upto 350 mm bore incl taking down complete all as specified and directed.

Supply & Fix Butter Fly Valve lever operated conforming to IS 13095 of size upto 150 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc complete all as specified and directed.

All as per Srl Item No. 46.00 here in before but 100 mm bore

Supply, fix and testing in replacement of Non Return Valve 350 mm dia PN 1.6, connected with two end flanges suitable for connecting with Pipe, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc complete all as specified and directed.

All as per Srl Item No. 48.00 here in before but 300 mm bore

All as per Srl Item No. 48.00 here in before but 250 mm bore

All as per Srl Item No. 48.00 here in before but 200 mm bore

All as per Srl Item No. 48.00 here in before but 150 mm bore

All as per Srl Item No. 48.00 here in before but 100 mm bore

All as per Srl Item No. 48.00 here in before but 80 mm bore

Supply & Fixing Joist, channel, angle, or tee sections, fixed independently with welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410W(GdeE-250) quality B against worn out channel, angle iron etc complete all as specified and directed .

Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored (except grey color), interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but not exceeding 250mtr, including demolation of existing paver blocks and earth work is also includes in this item rate complete all as specified and directed.

Material and labour for cement concrete 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed.

Material and labour for sand cushioning 25mm compacted complete all as specified and directed.

Material and labour for cement concrete 1:2:4 in foundations, filling and mass concrete complete all as specified and directed.

Supply and laying in trenches ductile iron pipe of 150mm bore, S/S,Class K-9 , with rubber gasket (tyton) joints, nut, bolts & washers ISI marked including taking up/down CI/DI pipes with connection and connected fittings/accessories complete all as specified and directed.

All as per Srl Item No. 60.00 here in before but 100 mm bore.

Note:- Amount of credit of Rs. 224195.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

RAJINDER KUMAR AND ASSOCIATES (BID ID -3208122)

M/S HARCHARAN SINGH (BID ID -3202879)

MAHESH GAUR AND CO. (BID ID -3202826)

R. P. Suppliers and Construction Co. (BID ID -3208183)