8793 SMART PERIODICAL SERVICES TO CERTAIN BUILDINGS OF BILLETS AND MESSES AT AF STATION, BAREILLY

Amount

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for applying two coats of white cement based putty including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and as directed

M&L for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and cornices by booming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note for BoQ Item No 1 to 5: (a) The work pertaining to periodical services shall be executed by authorized applicator of manufacturer of Paints proposed to be used by the contractor and approved by Garrison Engineer. (b) The contractor shall submit Memorandum of Understanding (MOU) with any of manufacturer mentioned in the contract prior to commencement of work.

M&L for preparation of old decorated surfaces of walls and cornices by mechanical wall sander (having mechanical vacuum mechanism); scrapping down old loose treatment, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling and cornices by mechanical wall sander (having mechanical vacuum mechanism); scrapping down old loose treatment, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth at a height up to 12m from ground level and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster on brick work or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement at heights up to 12m, complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and cornices by booming down etc. and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparation of old painted brick, stone, concrete or plastered surfaces of road side kerbs and applying one coat of synthetic enamel paint in zebra pattern i.e. in two different colours as directed, complete all as specified

Notes for Periodical services: MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 30 days from the date of commencement of work: (a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer (b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE (c) Procurement of T&P required for mechanical mode of painting (d) 50% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA (Except white wash) COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties.

M/S MAHIRA ENTERPRISES

MESSERS KHARAK SINGH BISHT