Strengthening of Road (P/L DGBM and BC on 45.00M wide road from Illabans T-Point to Karasa between Sector-90 and 138) Noida

Construction of Granular Sub base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause-401.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributer at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler. transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Morth specification clause No 505 complete in all respects.

Providing and laying Bituminous concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent by weight of total mix and filler. transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem roller to achieve the desired compaction as per Morth specification clause No 507 complete in all respects.

Providing wall putty on old Surface with Approved Quality Material of Berger/ J.K / Birla or Similar Make 2 Coats.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work