Renovation of Bathroom of welding section at work Shop Sub Division Baramulla.

Amount

Demolishing cement concrete 1:3:6 or richer mixmanually/by mechanical means including disposal of material within 50 mtrs lead as per dIrections of Engineer in charge.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth up to the lead of 50M or as directed:(All kinds of soil) Toilet block: 9x10x1=90cft=2.55cum septic tank=12x7x7=392cft=11.12cum soakage pit=3.14x3x3x10=282.6cft=8.0cum

Providing and laying of stone soling (Nallah Boulders upto 6" Hand packed) including ramming, dressing, watering and carriage up to the site complete.

Concrete work:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding TMT bars all complete for slab, lintels and DPC.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Providing and laying of RCC rings for soakage pit. 10 ft depth. and 3ft dia.

Masonary work:Brick work in superstructure above plinth level and upto floor V level including centering, shuttering and curing complete for span upto 6 meters with common burnt clay (non-modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) for septic tank.

12 mm cement plaster on interior walls including ceiling of mix 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality 300x300 ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 110 mm UPVC P- trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing and fixing Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing fixed with CP brass screws and washers complete.

providing and fitting of faucet along with required connector and holder.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass 2 in 1 angle valve of approved make conforming to IS : 8931

Providing and fixing of C.P brass wall mixer of approved quality

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing PTMT Bottle Trap for Wash basin :Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gmstowel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour

Providing and fixing of 75mm dia P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing of 25mm PVC unbreakable conduit and p/f of wiring for lighting /Heating points in PVC insulated multi- standard copper wire 1.5 sqmm (30 M) & 2.5 sqmm (20M) of Havells/equivalent make excluding cost of PVC channel. Job further includes providing, fitting and testing of 6A switches (2 no) & 16A Switch (1N0) . The job further includes P/F of 16 A combined swith socket.

Providing, fitting and testing of 15W Compact Flourescent lamps (CFL'S) complete with holder and PVC ring of philips/Havells/Orpat make.

Providing, fitting and testing of 300mm sweep exhaust fan complete with M.S frame of Khaitan/Havels /or equivalent make. The job also includes providing and carrying out wiring in 2.5 sqmm of Havells /equivalent make.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes PN-10 pipe , 50mm OD(SDR-11)conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.

providing, fitting and testing of vertical storage water heater (Geyser) of 25 ltr capacity complete with 2KW heating element and thermostat compleyte of Venus/Racolt or any other reputed make along with necessary PVC connections.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

providing and fixing of 0.5mm thick coloured G.S Panelling sheets in ceiling including cost of nails etc.

SUHAIL AHMAD KHAN