RENOVATION OF TOILET BLOCK AT QUARTER GUARD WITH URINAL FACILITY ADEQUATE WATER SUPPLY STORAGE FACILITY CONSTRUCTING ONE SEPTIC TANK SOAK PIT PROPER DRAINAGE LINES AT BCS GANGYAL 38 BN CRPF

DETAILS OF WORK

Dismantling of old cement concrete flooring by manual/mechanical means and disposal of dismantled materiral as per direction of Engineer in charge.

Dismantling old plaster of skirting raking out joints and cleaning the surface for plaster including dispossal of rubbish to the dumping ground within 50 metres lead.

Cement plaster in fine Sand 20 mm cement plaster of mis: 1:4 1 cement: 4 fine sand

Dismantling doores, windows and clerestory windows steel or wood shutter including chowkhats, architrave holdfasts etc complete and stacking within 50 metres lead of area 3 sp Metres and below.

Distempering with oil bound washable distemper of approved brand and manufature to give an even shade New work two or more coats over and including water thinnable priming coat with cement primer.

Providing and laying rectified Glazed Ceramic floor tiles of size 300X 300 mm or more thckness to be specified by the manufacture 1st quality conforming to IS : 15622 of approved make in all colours, shades exvept White lvory Grey Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 1 Cement : 4 Coarse sand jointing with grey cement slurry at the rate 3.3 kg/ per sqm including pointing the joints with white cement and matching pigments etc complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be sqecified by the manufacture of approved make in all colours, shades except burgundy bottle green black of any size as approved by Engireer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 1 cement : 3 coarse sand and jointing with grey cement slurry at the rate 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complet.

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipe having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing or pipes fittings with one step CPVC solvent cement and testin of joints complete as per direction of Engineer in Charge: Internal work Exposed of wall 20 mm nominal outer dia Pipes

Providing and fixing soi, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangment of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT swivelling shower 15mm nominal bore, weighing not less than 40 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality conforming to IS: 8931 15 mm nominal bore.

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of appoved make and shade with 6 mm thick hard hoard backing rectangular shape 453x 357 mm.

Providing and fixing wash pasin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets cutting and making good the walls wherever require: White Vitreous Chine Wash basin size 630X450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completey recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous chine pedestal type water closet European type W.C. pa with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device handle leve conforming to IS: 7231 with all fitting and fixures complete, including cutting

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame coverd with 5 mm thick heat mouled PVC 'C' chnnel of size 30 mm thickness, 70 mm width out which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on botth side to form lock rail. Top bottom and lock rails shall be provided both side of the panel. 10 mm 5mm x 2 thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mmm 5mm+2mm thick x 15 mm wide PVC sheet beading on inner side, and joined together with solven cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer in charge, manufacturer's specification and drawing: 30 mm thick plain PVC door shutters.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, Barrel type with necessary screws etc. complete: 200X10mm

Providing and fixing bright/matt finished Stainless Steel handle of approved quality & make with necessary screws etc all complete: 100 mm

Providing and fixing ISI marked, IS: 1341, M.S. heavy weight butt hinges with necessary screws etc. complete: 100x75x3.50mm.

Providing and fixing ISI marked oxidise M.S. door latches conforming t IS: 5930 with screws etc. complete: 300x20x6mm

Earth work in excavation by mechanical means Hydraulic excavator manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan including getting out the excauated soil and disposal of surplus excauated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of spedified grade excluding the cost of centering and shuttering All work up to plinth level: 1:2:4 1 Cement :2 coarse sand zone-III : 4 graded stone aggregate 40 mm normal size

Steel work in built up tubular round, square or rectangular hollow tubes etc trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes: 2.5" dia pipe for platform of over head tank.

Providing and placing on terrace at all floor levels 200 Ltr polyethylene water storage tank, IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including necessary joints fittings.

Electrification work:- Repairing Electrical Point wiring with 4.0 mm and 2.5 sq.mm and earth wire of 2.5 sq. mm both are of ISI mark 1.1 K.V. grade FRLS PVC insulated multi standard of copper wire, in following types of pipe to be erected, concealed in flushed on wall ceiling complete with 6 Amp and 16 Amp. modular type of switches & Sockets and plug erected on PVC metalic box covered with appropriate front plate modules erected on wall as per pipe erected with necessary 02 Exhaust fans L.E.D Tubes & Bulbs/ ceiling rose medium class rigid PVC pipe etc. as per the directions of Engineer in Charge.

M/S KAY KAY ENGINEERS AND CONTRACTORS