WBIW/EE/JID/e-NIT-28( e) /2025-26 SL3

Stripping off worn out plaster and raking out joints of wall, celings,etc. upto any height and in any floor including removing rubbish and stacking any where within the compound as directed.

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) i) With 1:6 cement mortar a) 20 mm thick plaster

b) 15 mm thick plaster

ii) With 1:4 cement morter c) 10 mm thick plaster

Applying decorative cement based paint of approved quality after preparing the surface including scraping the surface including scraping the same throughly ( plastered or conc. surface) as per manufacture specification. In ground floor. iii) Two coats

Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : (i) Internal surface (All floors) (a) One coat of colour wash (i) Other than yellow, pink.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white)

(b) On steel or other metal surface :With super gloss (hi-gloss) -Two coats (with any shade except white)

Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.) A. Over Flat Roof.

Please Enable Macros to View BoQ information