Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAdmitted-Finance | ₹3.1 L | L1 | Admitted-Finance |
| 2 | L2₹3.2 L+₹3,115 (0.99%)Admitted-Finance | ₹3.2 L+₹3,115 (0.99%) | L2 | Admitted-Finance |
| 3 | L3₹3.6 L+₹40,210 (12.8%)Admitted-Finance | ₹3.6 L+₹40,210 (12.8%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HUM INFRASTRUCTURE L1 | DEV ENTERPRISE L3 | mahalaxmi enterprise L2 |
|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil. | 1 | Cum | 90 ₹90 Lowest | 95 ₹95 | 850 ₹850 |
| 2.00 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) All kinds of soil. (i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 6 | Cum | 275 ₹1,650 Lowest | 290 ₹1,740 | 850 ₹5,100 |
| 3.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.5 | Cum | 4,500 ₹2,250 | 5,000 ₹2,500 | 4,200 ₹2,100 Lowest |
| 4.00 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. (a) Cement mortar 1:4 (1 cement :4 coarse sand) | 78 | Sqm | 900 ₹70,200 | 1,150 ₹89,700 | 750 ₹58,500 Lowest |
| 5.00 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (a) 100X58X1.90 mm | 6 | Nos | 150 ₹900 | 140 ₹840 Lowest | 250 ₹1,500 |
| 6.00 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 10 | Metre | 475 ₹4,750 Lowest | 500 ₹5,000 | 650 ₹6,500 |
| 7.00 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. (a) 30 mm thick plain PVC door shutters | 3 | Sqm | 4,300 ₹12,900 | 4,500 ₹13,500 | 4,200 ₹12,600 Lowest |
| 8.00 | Providing and fixing Stainless steel Aldrop of approved quality with screws etc. complete : (a) 250x16 mm | 2 | Nos | 180 ₹360 | 150 ₹300 Lowest | 450 ₹900 |
| 9.00 | Providing and fixing Stainless steel Tower bolt of approved quality with screws etc. complete : (a) 250x10 mm | 2 | Nos | 150 ₹300 Lowest | 150 ₹300 Lowest | 225 ₹450 |
| 10.00 | Providing and fixing Stainless steel round latches of approved quality with screws etc. complete : (a) 250x12mm | 2 | Nos | 150 ₹300 Lowest | 160 ₹320 | 350 ₹700 |
Tender Value
₹3.2 L
EMD Value
₹6,344
Closing Date
1 Sept 2026, 6:00 pmClosed
EE civil Ahmedabad
Third floor, Vasna TE building, Vasna Ahmedabad
Reinstate of rented premises of Surdhara TE Bldg. located in shop No.21 and 22, Shree Ratna complex, Surdhara circle, Thaltej, Ahmedabad City
2026_BSNL_288382_1
31/BSNL/CD/AHD/2026 dated 19/08/2026
Open Tender
Civil Works
Item Rate
60 days
Ahmedabad
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
Yes
Accounts Officer (Cash),O/O PGMTD, BSNL Ahmedabad
₹6,344
Yes
7 Sept 2026
21 Aug 2026
3 Sept 2026
21 Aug 2026
1 Sept 2026
21 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil. | 1 | Cum | 260.3 | ₹260.3 |
| 2 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (a) All kinds of soil. (i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | 6 | Cum | 352.15 | ₹2,112.9 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.5 | Cum | 6,518 | ₹3,259 |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. (a) Cement mortar 1:4 (1 cement :4 coarse sand) | 78 | Sqm | 1,270.8 | ₹99,122.4 |
| 5 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : (a) 100X58X1.90 mm | 6 | Nos | 107.1 | ₹642.6 |
| 6 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. | 10 | Metre | 492.7 | ₹4,927 |
| 7 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. (a) 30 mm thick plain PVC door shutters | 3 | Sqm | 3,182.95 | ₹9,548.85 |
| 8 | Providing and fixing Stainless steel Aldrop of approved quality with screws etc. complete : (a) 250x16 mm | 2 | Nos | 303.6 | ₹607.2 |
| 9 | Providing and fixing Stainless steel Tower bolt of approved quality with screws etc. complete : (a) 250x10 mm | 2 | Nos | 274.42 | ₹548.84 |
| 10 | Providing and fixing Stainless steel round latches of approved quality with screws etc. complete : (a) 250x12mm | 2 | Nos | 153.17 | ₹306.34 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.52 MB
Tendernotice_2.pdf
PDF • 0.47 MB
Tendernotice_3.pdf
PDF • 0.55 MB
enitNIT31ReinstateofSRCexchThaltej.pdf
Tender Documents • 1.50 MB
eNIT31app.pdf
Other Document • 0.46 MB
eNIT31dec.pdf
Other Document • 0.53 MB
BOQ_336397.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .