ADDN/ALTN AND SPECIAL REPAIR TO OFFRS MD ACCN (BLDG NO 29A, 29B, 29C AND 29F) AT BARRACKPORE MIL STATION UNDER GE BARRACKPORE

Amount

B/R PORTION Taking down cement plaster on brick or stone or concrete surfaces of wall etc , including raking out joints , hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:6) and finished even and smooth without using extra cement.

M&L for rendering 20mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) with WPC @100 ml per 50 kg of cement or all as per manufatucring Instruction. Note: WPC shall be measured and paid separately.

M&L for Rendering 10mm thick incement mortar 1:3 to fair face of brick works or concrete surfaces of ceiling surfaces .

M&L for two coats of oil bound distemper on newly plastered surface of wall over a coat of wall care putty incl preparation of surface complete all as specified and as directed

M&L for two coats of acrylic smooth exterior paint of required shade over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directed

M&L for two coats of oil bound distemper on newly plastered surface of celing over a coat of wall care bputty incl preparation of surface complete all as specified and as directed

M&L for preparation of old decorated acrylic smooth exterior paint of required shade of walls by complete removal of existing treatment etc and over a coat of alkali resistant cement primer and applying two coats of acrylic smooth exterior paint complete all as specified and as directed.

M&L for preparation of old decorated oil bound distemper surfaces of walls by complete removal of existing treatment etc and over a coat of wall care putty and applying two coats of OBD complete all as specified and as directed.

M&L for one coat of white wash including preparation of old decorated surface of ceiling

Demolition of reinforced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work.

M&L for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and in shelves and the like .

Use and waste of formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete .

M&L for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips .

S&F for 32 mm dia pipe waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable rubbish off the premises all as directed.

M&L for vitrified light shade ceramic tiles 10 mm thick (square/ rectangular) polished , area of each tile n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) as bedding layer complete all as specified and as directed

All as per item No 17 but as in skirting icluding 10mm thick rendering in cement mortar (1:4) as bedding layer complete all as specified and as directed

S&F Non skid ceramic colour floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement

M&L for Glazed ceramic colour tiles in vertical surface (450x300x7)mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering or bedding layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc. all as specified and directed.all as specified and directed.

M&L 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in cement mortar (1:6)

M&L for Machine cut kota stone slab flooring 20-25mm thick, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing 20mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) all as directed

M&L for 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and hard standing finish surface even and smooth with out using extra cement as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:3 to sunken portion of slab with using liquid water proffing compound finished even and smooth without using extra cement

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) as in boundary wall, drain etc complete all as specified and directed.

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) as in boundary wall, drain etc complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe all as directed.

S&F for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed. Note: Old serviceable steel tubes shall be obtained from Srl Item No. 29 here-in-before.

Taking up or down steel tubing and connections for 20mm bore of pipe all as directed.

S&F for 20 mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed. Note: Old serviceable steel tubes shall be obtained from Srl Item No. 32 here-in-before.

S & F rotational moulded Polyethylene water storage tank - 1000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl PVC float valve 25mm dia including dismantling existing tank complete all as directed

S&F for 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with manhole cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified in SSR Part-I all as specified and directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms)

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down chowkats with shutters (without taking down of shutter from the frames)n. exc 1.50 Sqm each.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each.

Taking down shutter of any description n exc 1sqm each.

Refixing Shutter of any description exc 1 sqm but n exc 2 sqm each Note: Old serviceable shutter shall be obtained from Srl Item No. 40 here-in-before.

S&F prelam PVC sheet solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet.

S&F both side prelalam PVC sheet stiles and rails feathered at edges factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing.

S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints,supplied and fix

S&F 35mm thick factory made 2nd class hard wood plain framed flush shutter with decorated typelock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated with (three panel )and prepared to receive glass/gangue (with sash bars) edges of forming plain chamfered or rounded fitted with cut and mitred bead for securing glass/ gauged etc size of member of shutter as per Pt-I, Section 8, Clause 8.20 (a)

S&F steel window with side hung shutter with box type hinges shutters with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

M&L for preparation of new steel surface over 10cm girth or width and apply two coats synthetic enamel paint over a coat of red oxide primer.

Dismantling structural steel work including doors,window , gates but excluding framed truss etc.

S&F framed work such as grill, framed guard bar and similer work conforming to Fe 290, Gde E- 165 all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as fixed in repair as old door/window.

Hacking out old broken glass (any thickness, size, quality or description) from wooden & steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 Sqm all as directed.

S&F 4mm thick sheet glass, ordinary quality and glzing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass ( any thickness, size , quality or description ) from wooden frames glazed with putty or fixed with beads .

S&F 4.0mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane in any position all as specified and directed.

S&F for 100 mm long Aluminium alloy with galvanised steel hinges

S&F for 75 mm long M.S steel butt hinges .

S&F for 150 mm aluminum Handle Cast type .

S&F for 200 mm aluminum , anodised, barrel tower bolts of extruded section .

S&F for 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F for 300mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed.

M&L for preparation of new wood surface over 10 cm girth or width and apply two coats synthetic enamel paint over a coat of pink primer

M&L for one coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described for One coat of synthetic enamel paint all as specified and directed.

S&F for flat iron as in hold fast,including tarring or coal tar black paint conforming to Fe 410-0 or Fe 310-0.

M&L plain cement concrete (1:2:4 ) type B1( using 20 mm graded aggregate ) used as in Brick or concrete wall for fixing of holdfast all as directed.

S&F in repairs continuous piano type hinges mild steel bright finish or electro galvanised , size of flaps ( when open) 40 mm

S&F in repairs curtain rod of aluminium alloy 20 mm dia all as specified and as specified.

S&F MS bracket powder coated of best approved quality suitable for fixing 25 mm bore Cromium plated (heavy) rod, fixed on wall as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F in repair 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore

S&F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete (Minimum weight 15mm-90 gms) all as specified and directed.

S&F in repair 15mm dia Stop valves, , high pressure, with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for unions complete as all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with plated bracket guard and railing 60cm long.

S&F in repair bathroom cabinet mirror (35x45) cm.

S&F in repair Vitreous China wash basin, white, flat back, size 580 X 450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair 15mm bore Pillar taps, fancy type cast copper alloy, long body with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

S&F in repair brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union.

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat, white closed patern withflat bottom and cover and mild steelcromium plated or aluminium hinging device complete all as specified and directed.

S&F in rapair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair low density polyethylene (LDPE) pipes of pressure rating 6 kg/Sqcm with 320mm dia

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm.

Dismantling of cast iron or reinforced concrete drain pipes ,jointed in cement mortar and taking out of trenches , if requried of 100mm bore all as specified and as directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F for 110mm bore PVC (SWR) bends any radious provided with access door .

S&F for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal provided with access door .

Demolition of cement concrete as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar suspented work .

Taking down cement or cement lime plaster on brick or concrete surfaces etc including racking out joints hacking for keys, scrubbing down with water etc.

Taking down of existing un-serviceable tarfelt / bituminous membraneon roof and parapet of any roof height carefully by cutting chiseling, cleaning the surface by scraping , brooming, brushing etc and removing the rubbish from site complete all as directed by Engr-in-charge.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) averaging 25mm thick as in roof padding / levelling course with WPC @ 100ml per 50 Kg cement all as specified including finished the surface even and smooth with using extra cement. Note : WPC shall be measured and paid separately under relevant item of Sch 'A').

M&L for 20mm thick rendering in cement mortar (1:3) on fair face of brick work mixed with water proofing liquid compound on walls and roof surfaces finished even and smooth using extra cement all as specified & directed. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid separately.

M&L for providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, top of chajjas, coping, basement for water tank etc rounded or chamferred on edges finishing the surface even and smooth complete all as specified and directed.

M&L for applying evenly a coat of bitumen primer on roof, parapet etc@ 0.40 Ltr / Per Sqm by the same membrance manufacturer of density 250C, 0.87 to 0.89 litre and viscosity 70-160 cps after proper cleaning the roof surfaces .

All as per item No. 97 above but vertical surfaces .

M&L for APP based polymeric membrane minimum weighing 3.6 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms / sqm) laid on primed surface with side over lap of 80 mm and end overlap of 100 mm using bitumen torch or by LP gas torching and sealing all joints etc and ensuring complete thermo fusing and applying one coat of aluminum Paint over it complete all as specified & directed .

All as per item No. 99 above but vertical surfaces .

Supply only liquid water proofing compound

Surfaces excavation n-exc (not exceeding) 30 cm deep and averaging 15 cm depth and getting out in soft/loose soil.

Excavation in trenches, n-exc 1.5 m wide and n-exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, Manhole, Pier Holes, etc and getting out soft/loose soil.

Removing excavated materials(Soil) n. exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L Hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface with broken stone or boulders

M&L for sand filling under floor or below paver blocks incl. watering and consolidation.

M&L for Coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement slurry and pigment complete all as specified and directed.

M&L for plain cement concrete type B-1, 1:2:4 using 20mm graded aggregatein kerbs , copings rounded or chamfered on edges , finishing top surfce even and smooth without using extra cement as in path side strips incl of form work of side complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 and painted one shop coat of zinc chrome primer paint( including preparation of surface) at contractor's workshop before fabrication. complete all as specified and directed

S&F 11 to 15mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm in length but n exc 15cm long complete all as specified and directed

S&F fiber glass reinforced plastic(FRP) door frames of cross section 90x45mm having single rebate of 30mmx15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M. S stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engr-in-Charge.

S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F MS work ( MS angle ) as in roof truss (framed), purlins, rafters including distance pieces, cleats etc including necessary cutting, welding etc complete Fe-410 w gde E-250 quallity A.

S&F framed brackets of angles or Tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc n.exc 10 kg each brackets, conforming Fe- 290. Gde -E-165 (brackets over 10 kg each to be measured under structural steel.

S & F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long ( Diameter of neck in n exc 12mm) complete all as specified .

M& L preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthatic enamel paint over one of red oxide primer all as specified and directed.

M&L for PCC type B1 1:2:4 (20mm graded aggregate) for bed blocks and similar work as specified.

M & L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred/stopped ends etc.

S & F for framed works as in doors or widows and gates of angle or other section with gusset plates,rails, braces,etc, complete , drilled for fixing of steel sheeting or other convering. Doors , etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete Fe 410 -W(Gde-E-250)quality A

E/M PORTION Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

M&L for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing one light point controlled by one switch complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height and shall be deemed in to included in quoted rate only.)

All as per Srl item No 125 here-in-before but one fan point controlled by one switch and one regulator.

All as per Srl item No 125 here-in-before but one exhaust fan point controlled by one switch .

All as per Srl item No 125 here-in-before but one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per Srl item No 125 here-in-before but one 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per Srl item No 125 here-in-before but one bell/buzzer point controlled by one bell push.

All as per Srl item No 125 here-in-before but one light point controlled by two 2 way switches.

All as per item No.125 but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

All as per item No.125 but point wiring with 4.00 sqmm and earth conductor of size 4.00 sqmm for one sheet steel enclosure metal clad plug and socket

S&F modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed.

S&F modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

S&F modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

S&F modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

S&F red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

S&F modular type step fan speed regulator 100/120W, 2 module,230volts,AC, 360 degree rotation 0 to 4 steps, ISI Marked complete all as specified and directed.

S&F call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

S&F angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.

S&F ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

S&F decorative box type 20/22 watt light fitting, blue coloured end caps, pre-wired, and including providing PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including LED T-8 tubular lamp of 20 Watt extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver with removing old unserviceable fitting complete all as specified and directed. Make of light fitting: Crompton Model No.DMLN1LT8-16/Havells Model REGALBATTENT8UPTO1X22WSSBSWH/Bajaj Model No BLRB-DB 218 or equivalent make in Philips Make of LED Rod Crompton Model No.LT8-20-865-2 / Havells Code No.PHOTONULTRA1213T8SSTL20WLED865SPC/Bajaj Model No BLRB20CW LED or equivalent make in Philips

Taking down carefully by unscrewing from ceiling rose or outlet boxes of LED Tube Light fittings of 20 Watt in any height or a place to be kept in safe custody and refix the same to it own position after cleaning dust particles and connections to be checked complete all as directed and specified.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as speicifed and directed. Make : Havells/Crompoton Greaves/Bajaj

S&F wall mounted decorative type surface mounted 1x6 watt LED light fitting including fixing arrangements at any hight with nuts ,screws and washers and connected to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Crompton cat No.LCSR-06-CD / Surya cat No.:- SLE DLS 6W XX Stellar RD / HPL product code:-HLPLEDSO6WW as approved

S&F SPN distribution board 8 way acrylic door 240 volts AC,SPN for flush mounting with 200 amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 200Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat and including removing old unserviceable item all as specified and as directed. Make:- Legrand cat No.5076 21 8 Way / Hager cat ref No.VYS08G (Acrylic door)/L&T Cat ref:-DBSPN008GD or equivalent in any approved make.

Taking down carefully by unscrewing, dismantling, and disconnecting all electric connection from DB of 8 way in any height or a place to be kept in safe custody and refix the same to it own position after cleaning dust particles and connections to be checked complete all as directed and specified.

S&F MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make

S&F MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed. Make:- Legrand/Hager/Havells or as approved make

M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade including taking down and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade including taking down and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

S&F in repair suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed. Make:- Legrand cat No.5078 11 20A SP,2P+E/ Hager cat ref no.VYA120C / Havells Cat No.DHDPUSN020/L&T Cat No.DBMPS220SD or as approved make Note:- MCB SP 20Amps will be deemed to be quoted rate

M&L for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size (45X 45X 45) CM,RCC cover 1:2:4 type B1 of size (45X45X6) CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Taking down of ceiling fan 1200/1400 mm of any make & capacity from any height overhauling of fan motor of any size and removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/kerosene applying new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts and material and labour for painting to ceiling fan complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces and to write fan marking number with black paint complete and refixing the same to its original position and proper electric connection to be made and all as specified and directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of ceiling fan)

Taking down of Exhaust Fan of size 300 mm of any make & capacity from any height and removing from frame and refixing the same including removing unserviceable grease, bearings, bushes, split pin, nuts and bolts and cleaning with petrol/kerosene apply new grease and reassembling complete including replacement of wornout spares with new like split pin, nut & bolts and material and labour for painting to exhaust fan complete body, blade assembly,frame etc of 300 mm sweep /make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces with black paint complete and refixing the same to its original position and proper electric connection to be made and all as specified and directed. Make of paint:-Asian/Berger/ Nerolac (Note:-Painting work to be carried out after dismantling of exhaust fan)

Taking down of Geysers of capacity 25 litres of any make & capacity from any height and dismantling from existing wall after disconnecting of electric and water supply connections to examine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces with black paint complete fixing back in same location after connecting up of water & electric connections and testing for its satisfatory functioning complete all as specified and directed.

Cutting the existing surface wall of brick/stone masonary and making square hole at any height suitable for fixing 230 to 300mm sweep exhaust fan including providing nut,bolt and washers after grouting with PCC including 3 mm dia 5cm apreature MS jali proper wooden frame to avoid trasparsing insects from out side and making good the disturbed surface area with cement and putty match with existing colour shade complete all as specified and directed.

S&F Fresh Air Fan 250 mm sweep made of sturdy engineering plastic complete with louvers shutter , 1200 rpm, copper winding, 240Volts,AC,50Hz as approved colour and connecting of electrical connections and testing complete all as specified and directed. Make : Havells

S&F LED security light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed. Make Havells/Bajaj/CG

S&F GI bracket pipe of size 40 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate MS flat iron clamps of (30X6) mm thick -02 Nos suitable for fixing any place of poles with nuts,bolts & washers complete all as specified and directed.

BUSINESS SYNDICATE

MS SHRI B.C. DAS

BHARUKA ENTERPRISES

ROY CONSTRUCTION

PEARL CORPORATION