PROVN OF DEFICIENT TOILET BLOCK FOR ORS LIVING ACCN OF 811 ENGR REGT ONGC (TA) AND CONVEX SAFETY TRAFFIC MIRROR FOR PCC ROAD QTY 04 (FOUR) AT 973 AD REGT WKSP UNDER GE (A) VADODARA

Amount

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation, laying pipe, cables etc or for the shafts, well, cesspits, manholes, pier holes, etc n exc 10 Sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil.

Ditto - all as per item No-1 above but depth exe. 1.5 m & n. exc 3.0m

M&L Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft /loose soil.

M & L for Plain cement concrete in foundations, filling and mass concrete type D2 1:4:8 (using 40 mm graded stone aggregate)

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams; and similar work; rough finished surfaces of concrete flat etc. all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, coumns and stanchions etc. Square, rectangular etc.rough finished surfaces of concrete flat etc all as directed.

M&L for formwork to sides of roof beam or lintel beam . Square, rectangular etc. rough finished surfaces of concrete flat etc all as directed.

M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work rough finished surfaces of concrete flat all as directed

M & L for TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe -500D.

Ditto but 5 mm dia and over upto and including 10mm dia in stirups, spacers and binders

M&L for reinforced cement concrete work (design mix)M-20 with using 20mm graded stoneaggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.

M&L for reinforced cement concrete work (design mix)M-20 with using 20mm graded stone aggregates as in beams,(Roof Beam or Plinth Beam) cantilievers, bressumers over 1.5 mtr, lintel Beam including chajja

M&L for reinforced cement concrete work (design mix)M-20 with using 20mm graded stoneaggregates as in columns, pillars, piers, posts and struts.

M&L for reinforced cement concrete work (design mix)M-20 with using 20mm graded stoneaggregates as in Roof Slab

Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm in soil.

Removing excavated material exc. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point

M&L for brick work with sub class "B" bricks old size brick straight or curved on plan exc 6m mean radius, built in CM 1 : 6

M&L for brick work with sub class 'B' bricks built in CM (1:4) straight or curved on plan to any radius in half brick thick walls with old size bricks.

M&L for 10 mm thick rendering in CM 1:6 on brick work or concrete surface on wall finished even and smooth without using extra cement complete.

M&L for rendering 5mm thick on fair faces of concrete surfaces on ceiling with CM 1:3

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall, 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in CM 1:6 complete. (Note : WPC shall be measured & paid separately)

Supply only integral water proofing compound

M&L for 75 mm thick cement concrete type C2 1:3:6 (40mm grade aggregate) as in plinth protection

M&L for hardcore of broken stone or boulders ,gauge n. exc 63mm, deposited, spread & leveled in layers n exc. 15cm thick,watered & rammed to a true surface

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base

M&L for preparation of new surfaces of any description and applying two coats of cement base paint on wall over a coat of alkaline resitant primer complete.

M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete.

M&L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer .

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and apply two coats of synthetic enamel paint over a coat of pink primer

M&L for 105x60 mm pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, locks strike plates etc.. Complete as specified and directed

M&L for 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, color and pattern as approved complete.

S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing (minimum thickness of powder coating 50 micron) etc. complete all as specified

S&F Mild Steel bands, straps, supports or holdfasts etc and similar small articles conforming to Fe 310-O or Fe 410-O

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as per specifications and as per drawing shown on sl page No 150 of SSR part II (for item-884)

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size

S & F 200mm size aluminium anodised, barel tower bolt of extruded section.

S & F 150mm aluminium alloy handles, fabricated type anodised

M&L Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in shelves/ platforms etc complete

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble incl 15mm thick screed bed in CM(1:6)

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified

M&L for glazed ceramic coloured wall tiles in vertical surface 300x200 / 350x250 / 450X350mm X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick rendering in CM 1:4 complete.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cement concrete bedding complete all as specified.

S&F Vitreous China wash down water closet pan (pedestal pattern) including jet spray, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device , toilet paper holder complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth for bore of pipe 15/20 mm complete

S&F CP Grating of size 150x150 mm complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L for Vitreous china wash hand basin white flat back 550 x 400 mm with pedestal of standard size including 32mm dia chromium plated brass waste coupling, waste pipe, vulcanite plug with ring, brackets and cutting for & pinning in ends of brackets etc complete and fixed.

S&F 15mm dia Pillar taps, fancy type,cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15mm dia and fixed all as specified and directed.

S&F Low density polyethylene (LDPE) pipes of 32mm dia of pressure rating 6 kgf/sq. cm

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

Supplying and laying of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F Brass chromium plated shower rose125mm size screwed for 15 MM bore iron pipe or brass, ferrule & fixed complete.

S & F Bib tap cast copper alloy with crutch or butterfly handle screwed down, fancy type chromium plated screwed for 15 MM bore iron pipe or brass, ferrule & fixed complete.

S & F Stop valve, cast copper alloy, chromium plated fancy type handle, screwed down, high pressure with push type handle screwed for 15mm bore iron pipe and fixed.

S & F Rotational moulded polyethylene (HDPE) water storage tanks, double layer (cylindrical vertical with closed top) capacity 500 litres hoisted and placed in posiition complete all as specified & as shown on drawings

S & F 20mm dia Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F for Towel rail 600 mm long with PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.

M & L for soap dish, vitreous china white, fixed to plugs with chromium plated brass screws

S&F PVC valveless 10lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle including brackets and 32 mm dia polyethylene waste pipe all as spd & directed

S&F Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified.

S&F PVC connection 600mm long of dia 15mm complete.

S & F 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors

S & F 110mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.

M&L in replacement PVC (SWR) bends without access door suitable for 75mm Bore pipe fixed complete.

M&L PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints fixed to wall complete

M&L PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints fixed to wall complete

M&L PVC (SWR) bends without access door suitable for 110mm bore pipe fixed complete.

M&L PVC (SWR) bends with access door suitable for 100mm mm bore pipe fixed complete.

M&L PVC (SWR) bends with access door suitable for 75mm bore pipe fixed complete.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, dia 75mm complete all as specified.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal, dia 110mm complete all as specified.

S & F 110 mm PVC (SWR) 'P’ trap

S & F PVC (SWR) vent cowl 100mm dia complete all as specified

S&F 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

M&L for 10 mm thick cement plaster (1:3) in CM with using water proofing compound @ 3% by weight of cement as per manufacturer's instructions complete . (WPC will be measured separately).

M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.30 Ltrs/Sqm, and laying actetic polypropylene (APP) modified membrane pre fabricated , reinforced with non woven polyester, of minimum 3.50 Kg/Sqm 3 mm thick (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge

M&L for Anti termite treatment by treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified.

M&L for Anti termite treatment by treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre all as specified.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including forming cradles after they are laid and tested for 150 mm dia RCC pipe complete all as specified & directed.

M&L for 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe.

M & L Cement concrete in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed type B2 1:2:4 (20 mm graded aggregate)

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work con- forming to Fe.290.Gde-E-165 complete

S&F for Outdoor polycarbonate convex mirror with 130 degree viewing angle,equipped with adjusting swivel and mounting bracket for infinite adjustment.diameter-100cm outer complete all specified and directed.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in and including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases in brick, stone / concrete, making good to match with the existing surface, sunk in pressed steel terminal boxes of required size not less than 3.0mm thick factory made and factory painted with top cover 3.0 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified for following:-

One light/fan/bell point controlled by one switch 6 Amp one way

S & F switch piano flush type single pole, one way 6amp, make: Anchor/SSK/Cona

S & F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked.

S & F 7W LED Bulb Including lamp holder System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >600 lm.

Supply and fixing of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS.

S & F MCB DB SPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed.

S & F MCB SPN 32 Amps 10 KA rupturing capacity.

MCB SP 5 to 30 Amp 240 Volts 10 KA rupturing capacity.

S&F Exhaust fan 250 mm sweep Ventilator 1250 RPM with minimum airflow/air delivery 720 Cmh, 06blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves,/Orient

S & F wall security light LED type 25 watt complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. Make CG or its equivalent in Phillips/Wipro/Halonix

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.

M & Lfor well burnt bricks sub class 'B' as in protection of cable laid dry, flat abutting each other width wise all as directed

Supply and Laying 10 sq mm 2 core including jointing and testing electric under ground LT cable XLPE insulated armoured aluminium conductor cable 1100 volts grade in trenches ducts, pipe on walls, poles of following sizes

M&L for 40 mm dia bore GI tubing light grade fixed on wall/pole laid in trenches/under road of the following sizes :-

M & L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected to and including galvanised iron steel wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

S & F to wall/trenches 20mm bore of pipe GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc for complete all as specified :

Aditya Construction

Badri Electricals