REPAIR/ MAINT OF INTERNAL ELECTRIFICATION WITH ALLIED WORKS AT OUTSIDE STATION UNDER GE (AF) JAMNAGAR NO 1

Amount

Taking down carefully aluminium point wiring complete of any type (batten / surface conduit for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces complete all as specified as directed by Engineer in Charge.

Taking down carefully aluminium sub main wiring/copper conductor of size upto 2.5 sqmm complete of any type and size (batten / surface conduit complete and making good disturbed surfaces complete all as specified as directed by Engineer in Charge.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc complete all as specified as directed by Engineer in Charge.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC Casing capping of suitable size , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including PVC terminal box of suitable size complete all as specified as directed by Engineer in Charge.

All as per item No 4 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch complete all as specified as directed by Engineer in Charge.

All as per item No 4 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch complete all as specified as directed by Engineer in Charge.

All as per item No 4 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch complete all as specified as directed by Engineer in Charge.

S&F in Switch piano, flush type single pole, one way 5 Amp including connection complete all as specified as directed by Engineer in Charge.

Supply & Fixing Socket outlet 3 pin, 6A, flush type including connection complete all as specified as directed by Engineer in Charge.

S&F switch flush type 16 Amps, including connection complete all as specified as directed by Engineer in Charge.

S&F socket flush type 6/16 Amps, 2 in 1 multipurpose including connection complete all as specified as directed by Engineer in Charge.

S&F in repair Switch piano, flush type single pole, one way 5 Amp including connection complete all as specified as directed by Engineer in Charge.

Supply & Fixing in repair Socket outlet 3 pin, 6A, flush type complete all as specified as directed by Engineer in Charge.

S&F in repair switch flush type 16 Amps including connection complete all as specified as directed by Engineer in Charge.

S&F in repair socket flush type 6/16 Amps, 2 in 1 multipurpose including connection complete all as specified as directed by Engineer in Charge.

M & L in repair for Ceiling rose 3 pin flush type 6 Amps, 240 volts AC ISI marked complete all as specified as directed by Engineer in Charge.

Supply and fix in repair stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete all as specified as directed by Engineer in Charge.

M&L in repair modular Switch, white polycarbonate body, single pole, one way 6 amp, 230 V, including connecting complete all as specified as directed by Engineer in Charge. Make- Anchror /Havells /Philips

M & L in repair modular socket white polycarbonate body, 6A- 230 V, 2/3 pin combined, including connecting complete all as specified as directed by Engineer in Charge. Make- Anchror /Havells /Philips

M & L in repair modular Switch, white polycarbonate body, 16A- 230 V, including connecting complete all as specified as directed by Engineer in Charge. Make- Anchror /Havells /Philips

M & L in repair modular socket, white polycarbonate body, 6A / 16A- 230 V, Multipurpose, indicator based including connecting complete all as specified as directed by Engineer in Charge. Make- Anchror /Havells /Philips

Supply and fix in repair modular stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete all as specified as directed by Engineer in Charge.

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 20/22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified as directed by Engineer in Charge.

S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 10 watt, aluminium extruded channel (approximate length 600 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified as directed by Engineer in Charge.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engineer in Charge. Note: 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

S&F in repair energy efficient recessed mounted downlighter 18 watt LED luminaries suitable for square recessed with flat diffuser alongwith constant current electronic driver, UV resistance & polycarbonate cover complete all as specified as directed by Engineer in Charge.

S & F in repair metal clad plug & socket board Single pole and neutral enclosure with two pin and earth metal plug & socket complete with 20 Amp MCB SP, C curve complete all as specified as directed by Engineer in Charge.

S&F in repair Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall complete all as specified as directed by Engineer in Charge.

S&F in repair Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall complete all as specified as directed by Engineer in Charge.

S&F Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall complete all as specified as directed by Engineer in Charge.

S&F Distribution board made out of sheet metal powder coated, factory made, enclousure double door type VTPN 4 way vertical type (suitable for incoming MCCB and outgoing MCB) with 200 (Amps rated copper bus bar, neutral bar, earth bar, IP 43 protection fixing of DB flush to wall surface complete all as specified as directed by Engineer in Charge.

Supply and Fix in repair MCB’s single pole of 6 to 32 amp capacity C Curve, fixed in sheet metal board complete including connection complete all as specified as directed by Engineer in Charge.

Supply and Fix in repair MCB’s single pole & neutral of 6 to 32 amp capacity, fixed in sheet metal board complete including complete all as specified as directed by Engineer in Charge.

Supply and fix in repair MCB’s triple pole & neutral, 32 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete all as specified as directed by Engineer in Charge.

Supply and fix in repair MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete all as specified as directed by Engineer in Charge including connecting.

M&L for Taking out old unserviceable LT Panel board after disconnecing all incomging and outgoing connection complete all as specified as directed by Engineer in Charge.

Supply,testing and commissioning outdoor weather and vermin proof L.T.Panel board factory fabricated outdoor cubicle type totally enclosed made out of 3.15 mm thick sheet metal enclosure with angle iron frame of suitable size, CPRI approved, IP-42 for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel opening doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor FRLS PVC insulated cables of adequate size, duly with painted one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour and bus bar rating 600Amp for 3 phase & neutral mounted on epoxy insulator-01 Set including connecting the following complete all as specified as directed by Engineer in Charge. (i) Incoming MCCB 4 pole , 415 Volts, 36 KA fixed type with thermal magentic relase of capacty 400 Amps - 01 Nos (ii) Outgoing MCCB 4 pole , 415 Volts, 36 KA fixed type with thermal magentic relase of capacty 250 Amps - 02Nos (iii) Outgoing MCCB 4 pole , 415 Volts, 16 KA fixed type with thermal magentic relase of capacty 100 Amps - 02Nos (iv) Digital METRE Amp and volt as per recommed by OEM ((v) LED Phase indicator lamps(RYB) - 1 set

Supply and fix in repair Energy efficient recessed mounted 36 watt LED luminaries suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver, IP 65 Protection, UV resistant & polycarbonate cover complete all as specified as directed by Engineer in Charge. Make:- PLANO2X2PLR36WLED865S CG Cat No LCTLRP-24-FO-CDL or equivalent

Supply in repair MCCB 63 Amp, Four Pole, breaking capacity 16 KA, 415 V - 50 Hz, fixed in existing panel & connecting complete all as specified as directed by Engineer in Charge.

Supply in repair MCCB 100 Amp, Four Pole, breaking capacity 16 KA, 415 V - 50 Hz, fixed in existing panel & connecting complete all as specified as directed by Engineer in Charge.

Supply in repair MCCB 125 Amp, Four Pole, breaking capacity 36 KA, 415 V - 50 Hz, fixed in existing panel & connecting complete all as specified as directed by Engineer in Charge.

Supply in repair MCCB 160 Amp, Four Pole, breaking capacity 36 KA, 415 V - 50 Hz, fixed in existing panel & connecting complete all as specified as directed by Engineer in Charge.

Supply in repair MCCB 200 Amp, Four Pole, breaking capacity 35 KA, 415 V - 50 Hz, fixed in existing panel & complete all as specified as directed by Engineer in Charge.

Supply and fix in repair GI earth strip of size 32 x 6 mm fixed on wall over and including epoxy insulators and fixing screws etc for earth continuity conductors to test point terminal block complete all as specified as directed by Engineer in Charge.

Supply and fix in repair Copper earth strip of size 20 x 3 mm fixed on wall over and including epoxy insulators and fixing screws etc for earth continuity conductors to test point terminal block complete all as specified as directed by Engineer in Charge.

Taking down carefully street light fittings (LED type light) any make and capacity for repair and refixing the in position after necessary repairing at same / different location, including provision of necessary T & P like ladder / Boom Veh, tools etc as required for taking down & refixing of Street light complete all as specified as directed by Engineer in Charge. Note:- Replacement of defective spare part for repairing of fitting will be measured & paid separately as supply only.

Supply only driver suitable for 150-200watt LED Flood light fitting of any make as per site requirement complete all as specified as directed by Engineer in Charge.

Supply only driver suitable for 90-110watt LED Flood/street light fitting of any make as per site requirement complete all as specified as directed by Engineer in Charge.

Supply only driver suitable for 60-72watt LED Flood/street light fitting of any make as per site requirement complete all as specified as directed by Engineer in Charge.

S&F in repair Power Contactor 3 pole 32 amps, Aux contacts, 415V, 50Hz., fixed in position & connecting complete all as specified as directed by Engineer in Charge. Make: L&T type MNX or equivalent of make C&S, BCH, Siemens

S&F in repair Analog type clock timer switch to set street light ON / OFF timing complete all as specified as directed by Engineer in Charge. Make: L&T / Legrand / Schneider

S&F in repair LED type building security light of capacity 35/36 watt white light with driver, having luminaries Efficiency not less than 100 lm / Watt, fixed in Pressure Die Cast Aluminum housing, & glass cover, Ingress protection of IP 66, including all necessary fitting & fixture,& connecting complete, including taking down old unserviceable fitting complete all as specified as directed by Engineer in Charge.

S&F in repair LED flood Light fitting 150 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, including taking down old light fitting of any description complete all as specified as directed by Engineer in Charge.

S&F in repair LED flood Light fitting 200 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, including taking down old light fitting of any description complete all as specified as directed by Engineer in Charge.

S&F in repairs LED Street Light fitting 70-72 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete all as specified as directed by Engineer in Charge. Make Crompton Cat No TRP-409-70-57-SL-GL-NSG or equivalent make in Wipro/Philips/

S&F in repairs LED Street Light fitting 90 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as specified as directed by Engineer in Charge including taking down old unsv fitting all as directed complete.Make Crompton CAt No LSTP-90-CDL /TRP-411-90-57-SL-GL-NSGor any other equivalent

Material and labour for repairing of 1 to 1.5 HP capacity electric motor of high mast , AC 3 Phase by dismantling the motor cutting and taking out the old winding wires, clearing the slots , rewinding the motor with appropriate size of copper conductor wiring wire of same gauge and varnishing complete including replacement of worn out bearing reassembling the motor and fixing in same position and testing complete all as specified as directed by Engineer in Charge.

M&L for servicing and preparation of steel surface of LT Feeder pillar box of any size and capacity complete , and applying a coat of synthetic enamal paint of colour as directed by Engr-in-charge complete , inlcuding tighting of lux, nut bolts of all incoming and outgoing cables , placing of insulation tape in burn poriton of cables, welding work of hinges of doors , complete all as specified and as directed by Engr -in- charge

S&F street light bracket fabricated from 40 mm bore galvanised iron tubing light grade, 1.2 metre long, bent to shape fixed on pole / bldg including mild steel flat iron clamps, nuts, bolts etc including taking down old bracket from existing position complete all as specified as directed by Engineer in Charge.

Supply & fix weather proof, PVC insulated, FR PVC sheathed, cable, with multistranded copper conductor of size 2.5 Sqmm, 2 core, fixed from Junction box to street light fittings including taking down old cable complete all as specified as directed by Engineer in Charge.

S&F in repair LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED chip & driver, fixed in position & connecting complete all as specified as directed by Engineer in Charge. Make Bajaj Cat No BGAV 302 LED or equivalent of make mention in Appx B

Supply and fix in replacement of LED Bollard garden light fitting with base plate and necessary foundation and connected electric connections and PCC work complete and IP 65 / IK 10 bollard complete all as specified as directed by Engineer in Charge. Make Havells BAMBOOBLS8WLED857PSYMTOPC or equivalent of Wipro , Crompton

Supply and fix in replacement of LED Post-Top lantern 40watt, energy saving, environmental friendly, long life aesthtically designed with symmentrical light distribution, spun aluminium landscape luminaire with high power LEDs as suitable for pole size and making arrangements ,pcc work , electric connections complete all as specified as directed by Engineer in Charge. Make:- Crompton Cat No: LPTO-40-CDL or equivalent of make wipro/havells

S&F in repair 20mm dia PVC conduit ISI marked heavy duty fixed complete to walls/on pole with mild steel clamp nuts and bolt complete all as specified as directed by Engineer in Charge.

S&F in repair Sheet moulding compound (SMC) junction box of size 250 mm x 200 mm x 150mm, comprising three phase aluminium bus bar and one No MCB SP, 06 Amps C type, fixed on pole with mild steel clamps, nuts and bolts complete all as specified as directed by Engineer in Charge.

Supply & laying 40 mm bore mild steel galvanised iron tubing light grade for protection of cable / earth continuity conductor etc, fixed to poles / wall with clamp nut bolt etc / laid on roof or laid on floors, road, crossing or ducts etc, including taking down old tubing complete all as specified as directed by Engineer in Charge.

Supply & laying 50 mm bore mild steel galvanised iron tubing light grade for protection of cable / earth continuity conductor etc, fixed to poles / wall with clamp nut bolt etc / laid on roof or laid on floors, road, crossing or ducts etc, including taking down old tubing complete all as specified as directed by Engineer in Charge.

Supply & laying 80 mm bore mild steel galvanised iron tubing light grade for protection of cable / earth continuity conductor etc, fixed to poles / wall with clamp nut bolt etc / laid on roof or laid on floors, road, crossing or ducts etc, including taking down old tubing complete all as specified as directed by Engineer in Charge.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundation / fixing pole / laying cable and pipe line etc or for man hole etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified as directed by Engineer in Charge.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick using suitable excavated soil all complete all as specified as directed by Engineer in Charge.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified as directed by Engineer in Charge.

M&L for providing dry river sand as in sand cushioning below and above cable thickness as specified in SSR to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge.Note: for measurement purpose punned thickness of sand will be consider complete all as specified as directed by Engineer in Charge.

Taking out old PCC cable cover of any size / any type from trenches and relaying complete all as specified as directed by Engineer in Charge.

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, flat of size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable complete all as specified as directed by Engineer in Charge.

Taking out Old unserviceable LT aluminium conductor UG cable of size 3.5/4 core upto 50 sqmm complete all as specified as directed by Engineer in Charge.

Taking out Old unserviceable LT aluminium conductor UG cable of size 3.5/4 core from 70 to 120 sqmm Sqmm complete all as specified as directed by Engineer in Charge.

Supply & lay UG XLPE insulated armourned heavy duty electric cable with Aluminium conductor 1100 V grade laid in trenches / passing through GI tubing / on pole / on wall etc. complete all as specified as directed by Engineer in Charge of following sizes. (i) Earthwork, sand cushion, cable cover will be measured and paid separately under respective items of this Schedule. (ii) Straight through joint will be measured and paid separately.

16 Sqmm 4 core complete all as specified as directed by Engineer in Charge.

25 Sqmm 3.5 core complete all as specified as directed by Engineer in Charge.

70 Sqmm 3.5 Core complete all as specified as directed by Engineer in Charge.

95 Sqmm 3.5 core complete all as specified as directed by Engineer in Charge.

120 Sqmm 3.5 core complete all as specified as directed by Engineer in Charge.

M & L for flameproof surface point wiring on wall and surface wiring on ceiling / roof /hanger with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including for one light, fan point controlled by one switch complete all as specified as directed by Engineer in Charge.

Supply and fxing switch flame proof rotary type with termination box in LM 6 16A single pole 250 V complete all as specified as directed by Engineer in Charge.

S&F in repair LED flood light fitting 45 watt LED Flame proof - weather proof well glass luminaire with LM 79 aluminium alloy lamp housing , heat resistant and tuffend glass, hings cover with neroprene gasket, painted MS bar guard, epoxy finish provided with internal flameproof control gear & fixing accesories with suitable driver including fixing arrangement complete all as specified as directed by Engineer in Charge.

Supply and fixing LED light fitting 1x16/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified as directed by Engineer in Charge.

Supply jointing connecting and testing, straight through joint, epoxy based complete with jointing material and all standard accessories suitable for XLPE insulated armoured aluminium conductor cable, LT 1100 Volts, aluminium conductor of 3.5 core, 50 to 95 Sqmm complete all as specified as directed by Engineer in Charge.

Supply jointing connecting and testing, straight through joint, epoxy based complete with jointing material and all standard accessories suitable for XLPE insulated armoured aluminium conductor cable, LT 1100 Volts, aluminium conductor of 3.5 core, 120 to 300 Sqmm complete all as specified as directed by Engineer in Charge.

Taking down carefully ceiling fan / exhaust fan / cabin fan / wall mounted fan by disconnecting electric connection for repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, testing and connecting complete all as specified as directed by Engineer in Charge. Note:- (i) Repairing such as rewinding, replacement of defective spare part, connecting wire etc will be measured & paid separately as supply & fix in repair (ii) Over hauling and painting will be measured & paid separately. (iii) After repair / replacement of worn-out parts, the fan will be tested to the entire satisfaction of Engineer-In-Charge and in case of failure of test, the same shall be repaired at contractor's cost.

M & L for rewinding of ceiling fan 1200/1400 mm sweep of any make by dismantling the ceiling fan, removing the burnt winding, cleaning slot, replacement of defective nut bolts washer etc and rewinding with using appropriate size of super enameled copper winding wire thermal class-E, including varnishing and reassembling and testing complete all as specified as directed by Engineer in Charge.

All as item No 92 above but exhaust fan 300/450 mm sweep complete all as specified as directed by Engineer in Charge.

All as per item No 91 above but flame proof exhuast fan 300/450mm complete all as specified as directed by Engineer in Charge.

Supply and fix in repair ball bearing of any size of ceiling fan of 1200 mm / 1400 mm sweep complete all as specified as directed by Engineer in Charge.

Supply and fix in repair capacitor 2.5 MFD AC 230 Volt 50 HZ, of ceiling fans complete all as specified as directed by Engineer in Charge.

Supply and fix in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified as directed by Engineer in Charge.

jagdish machinery stores (BID ID -3479406)

SURESH ELECTRICALS (BID ID -3479125)

M/s SK Traders (BID ID -3478095)

MADHAV ENTERPRISE (BID ID -3478233)

Sukhi Electricals (BID ID -3478274)

Krishna Bhoomi Enterprise (BID ID -3479374)

Nitesh Enterprise (BID ID -3479763)

JAMNAGAR ELECTRIC AND MACHINERY CO (BID ID -3479154)