Improvement of Power Distribution System of Administrative Office Building of VPA duly providing of New 11 KV 5-way RMU, AMF panel suitable for 600KVA Generator and replacement of old deteriorated LT Switchgear Indoor Distribution Panel and 3 Core,

Amount

Supply, installation, testing & commissioning of 11 KV RMU with rated voltage 12kV, 630A, 21kA/3sec, Outdoor type, extensible type on both sides, Internal arc 25kA for 1 Sec for Tank, floor mounted with internal copper bus bars, SF6 Insulated, completely Motorised, 5 Way RMU consisting of 2 Nos. VCB's as Incomer, 2 Nos. 630A VCB's as Outgoing with SCADA compatible Overload and earth fault protection Relay The unit shall have front cable entry (Suitable for termination of 1R x 3C x 95.120/150 Sq.mm Cable. As per the following switch gears and enclosed Annexure- a.630A VCB's as Incomer -02 Nos b. 630A VCB as Outgoing- 03 Nos. c.Capacitive voltage indication fixed type VPIS 6-12 kV – 04 Nos d. Ring core current transformer type - 12 Nos e. Core 1 : 200-100/1 A, 2.5VA, 5P10 for Protection f. Core 2 : 200-100/1 A, 2.5VA, 1.0 for Metering – 04 Nos g. Fault Passage Indicator – 1 No h. Digital Multifunction Meter – Rishabh Make – 04Nos i. Cable cover standard with Interlocking - 01 Lot j. Bus PT 11kV/r3/110/r3 , 25VA , Class – 02 Nos k. Space Heater with Thermostat – 01 No l. Operating handle – 04 Nos m. 2 x 12 V DC Battery and Battery charger – 01 Set n. 230V AC auxiliary supply for battery charger with all necessary spares – 01 No o. Indication Lamps - 01 – Lot p. Safety Interlocks --As required q. Make: ABB/SCHNIDER/SIEMENS

Supply of 3C x 95 Sq. mm XLPE insulated IS:7098/II/85 H.T. cable for working voltage 11 K.V Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc. complete with all material, tools and tackles as directed by Engineer-In-Charge Make: KEI / Polycab / Gloster / RR Kabel / RPG / Finolex

Laying / clamping / drawing of the HT / LT grade, 3 Core X 95 Sq.mm armoured cable in existing trench / to wall/pole / through existing HDPE pipe with all materials tools and tackles as directed by Engineer –in-charge. Note : Cable will be supplied by VPT at free of cost

Excavation of trenches in Hard/dense soil of required width for laying of GI pipes, cables and retrieving the existing cables etc., including dressing of sides, ramming of bottoms, suitable depth including getting out the excavated soil and the returning the soil including consolidating each deposit layer by ramming, watering etc., and disposing of surplus excavated soil as directed by engineer in charge and complete all labour and material

Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge.

Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate (220 Kgs of cement per M3of finished concrete) including mixing, depositing in position, tamping, finishing and curing for base/pole concreting, road cutting etc. as directed by engineer in charge including all labour and tools.

Supply and Laying / clamping of 110 mm dia HDPE pipe of PE 100 Grade confirms to ISI in the existing in trench complete as directed by Engineer in charge including all labour and material. Make: Tulasi / Sudhakar / Nandi

Supply and providing of Indoor end termination with brass glands for 3 Core, 120-185 Sqmm cable including providing suitable lugs and necessary taping with suitable colour coded PVC tape including all labour, materials, tools and tackles as directed by engineer in charge.Make: DOWELS/ COMET/SMI/Jainson

Supply and Providing, earth station using 2.5 meters long, 80 mm C.I pipe. Duly perforated with suitable PCC Cover to the pit with alternate layers of coal, Salt and Sand complete as per IS 3043 as directed by engineer in charge including all labour and material

Supplying, fixing, connecting and commissioning of 50 X 6 MM GI earth strip in recess/surface/clamped to wall/through PCC etc., from earth to switch gear/equipment including connecting the same at both ends as directed by engineer in charge including all labour and material

Providing and fixing G.I tubular gate (double shutters) with 40 mm dia, G.I. pipe with frame including diagonal pipes including painting with one priming coat and two coats of synthetic enamel paint of approved colour and shade (total three coats) etc., with locking arrangement, necessary MS flats, iron pintels etc., including fixing in CC bed block as directed with 12 mm dia, bolts and nuts, washers etc., as required complete with all material, tools tackles as directed by Engineer- in- charge

Supplying and fixing galvanized steel chain link mesh of 50 mm x 50 mm openings and 10 gauge as per IS 2721-1979 including bending, tying with G.I. wire / welding etc., as directed by the EIC complete with all material, tools tackles as directed by Engineer- in- charge.

Disconnecting , Dismantling and Removal of LT panel consisting of 13 cubicles without any damage and to handover to E/M or General stores including loading , unloading and transportation as directed by Engr. I/c

Dismantling of existing 2 pole / 4 pole structure duly removing of pin / disc insulators, busbar jumpers, channels. Cross bracings etc., and to handover to E/M or General stores including loading, unloading and transportation as directed by Engr. I/c

Removal of existing B.G. rail pole/ Tubular pole / spun pole duly breaking the coping and base PCC, excavating the earth upto 0.5mts depth from the ground level cutting the pole refilling the excavated earth and making the surface good to match the surroundings, returning the removed pole to E/M section stores /general stores as directed by Engineer in charge including all labour and material

Foundation and erection charges with special T&P, for RMU’s duly providing foundation bolts with nuts with M20 CC work vibrated concreting mixing with necessary steel (20kgs) reinforcement, including excavation of earth complete with all materials labour tools and tackles as directed by Engr.I/c.

P S ENTERPRISES (BID ID -790383)