Supply of Road Safety Material and Road Safety Work

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Municipal Corporation, Katni

Name of Work: Supply of Road Safety Materials and Road Safety Work

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excluding GST Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Supply of Road Safety Materials and Road Safety Work 1 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

1.01 Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatorysignasperIRC:67madeofhigh intensity grade sheeting vide Section 801.3 of the specifications,2mm thick aluminium sheeting, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cementconcrete45cmx45cmx60cm,60cmbelow ground level as per approved drawing. The sign shall be maintained as per IRC 67. 90cm equilateral triangle 2 1 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.02 Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatorysignasperIRC:67madeofhigh intensity grade sheeting vide Section 801.3 of the specifications,2mm thick aluminium sheeting, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cementconcrete45cmx45cmx60cm,60cmbelow ground level as per approved drawing. The sign shall be maintained as per IRC 67. 60cm equilateral triangle 3 1 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.03 Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatorysignasperIRC:67madeofhigh intensity grade sheeting vide Section 801.3 of the specifications,2mm thick aluminium sheeting, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cementconcrete45cmx45cmx60cm,60cmbelow ground level as per approved drawing. The sign shall be maintained as per IRC 67. Rectangular( 90cmx75cm rectangular) 4 1 Each 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

1.04 Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatorysignasperIRC:67madeofhigh intensity grade sheeting vide Section 801.3 of the specifications,2mm thick aluminium sheeting, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cementconcrete45cmx45cmx60cm,60cmbelow ground level as per approved drawing. The sign shall be maintained as per IRC 67. 80cmx60cm rectangular 5 1 Each 1 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

1.05 Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatorysignasperIRC:67madeofhigh intensity grade sheeting vide Section 801.3 of the specifications,2mm thick aluminium sheeting, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cementconcrete45cmx45cmx60cm,60cmbelow ground level as per approved drawing. The sign shall be maintained as per IRC 67. 60cmx45cm rectangular 6 1 Each 1 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

1.06 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of class C Type XI retro reflective sheeting fixed over 2mm thick aluminium sheetingvide Section 801.3 of the specifications, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over backsupportframeofmin.25x25x3mmAnglemountedon a mild steelcircular pipe 65 NB ,3.2 mm thickness firmly fixed to the ground by means of properly designed foundationwithM25gradecementconcrete45cmx45cm x60cm,60cmbelowgroundlevelasperapproved drawing. The sign shall be maintained as per section 12 of IRC 67 60cmx60cm square 7 1 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.07 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of class C Type XI retro reflective sheeting fixed over 2mm thick aluminium sheetingvide Section 801.3 of the specifications, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over backsupportframeofmin.25x25x3mmAnglemountedon a mild steelcircular pipe 65 NB ,3.2 mm thickness firmly fixed to the ground by means of properly designed foundationwithM25gradecementconcrete45cmx45cm x60cm,60cmbelowgroundlevelasperapproved drawing. The sign shall be maintained as per section 12 of IRC 67 90cm circular 8 1 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.08 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of class C Type XI retro reflective sheeting fixed over 2mm thick aluminium sheetingvide Section 801.3 of the specifications, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over backsupportframeofmin.25x25x3mmAnglemountedon a mild steelcircular pipe 65 NB ,3.2 mm thickness firmly fixed to the ground by means of properly designed foundationwithM25gradecementconcrete45cmx45cm x60cm,60cmbelowgroundlevelasperapproved drawing. The sign shall be maintained as per section 12 of IRC 67 90cm high octagon 9 1 Each 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

1.09 Road Marking with Hot Applied Thermoplastic Compound with Retro-Reflectorising Glass Beads Providing and applying 2.5 mm including reflectorising glass beds @ 250 gm per Sqm area thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater,driven by experienced operator on road surface including cost of material,labour,T&P,cleaning the road surface of all dirt,seals,oil,grease and foreign material etc. complete as per direction of Engineer-in-charge and as per Section 803 of specifications 10 1 Sqm 1 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

1.1 Road Delineators Supplying and installation road delineators (road way indicators). as per MORT&H Section 806 of specification. The structure shall be made in roll forming process having heightof800-00mmabovethegroundlevel,widthnotless than 100 mm and shall extend not more than 200-00mmbelowthegroundwhilebeinginstalled,buriedorpressedin tothegroundinconfirmationwithIRC:79,areasdirectedby the Engineer-in-Charge.Theguidepostwithpurepolyester powder coating with minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting confirming to IRC-67 and ASTMD-4956 shall be pasted on both sides complying to IRC:79. The delineator should consist of minimum retro reflective unit exposed area of 330 cm2 white colour, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI label specification. The delineator shall have groovesacrossthe-lengthtomakethereflectivesheets vandal-proof 11 1 Each 1 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

1.11 Road Markers/Road Studs with Lense Reflector: Providing and fixing of Category-A Bi-directional Twin- Moulded Shank Raised Pavement Markers/Road Stud made of Plastic body moulded from ASA (Acrylic styrene Cryometries) or HIP (High impact polystyrene) or ABS material. Lens shall beof plastic material. The marker shall have compressive strength of 13635 kg tested accordance with ASTM D4280 and shall have Flexural Strength of 909 kgf. Reflective panels shall consist of number of lenses containing Single or dual prismatic cubes capable of providing total internal reflection of light entering the lens face.TheSlopeortheretro-reflectingsurfaceshallbe35 +/- 5 degree to the base and area of Each retro reflecting surface shall not be less than 13 sqcm. When impacted in accordancewith9.4.1ofASTM D4280,thefaceofthelens shall show no more than two radial cracks longer than 6.4 mm (0.25 in.). There shall be no radial cracks extending to the edge of the abrasion resistant area. There shall be no delamination. Height of the marker shall not exceed 20 mm and its width shallnotexceed130mm.Mouldedshank RPM shall have the shank strength of 600kgf. Head of the etc) 12 1 Each 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.12 Traffic Cone Red fluorescent with white reflective sleeve traffic cone made of low-density polyethylene (LDPE) material with a squarebaseof390x390x35mmandaheightof770mm, 4kginweight,asperspecifications 13 1 Each 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

1.13 Portable Barricade in Construction Zone nstallation of a steel portable barricade with horizontal rail 300mmwide,2.5minlengthfittedona'A'framemadewith 45x45x5mmangleironsection,1.5minheight,horizontal railpainted(2coats)withyellowandwhitestripes,150mm inwidthatanangleof450,'A'framepaintedwith2coatsof yellow paint, complete as per provisions of IRC:SP:55. 14 1 Each 1 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

1.14 Barricading(1.6mhigh) Providing and fixing 1.6m high barricading during construction with 0.63mm thick GI sheets in double row fixedwith75mm dia wooden ball ies or 50mmdia.MSpipe buried in existing road sufficiently including painting with yellow and black bands by synthetic enamel paint as per the traffic norms and as directed by the Engineer in charge. 15 1 Rm 1 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

1.15 Barricading(2.00mhigh) Providing and erecting 2.00metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shapedholesofsize50x25mmatbothendswith50cmlong MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many timesasrequiredduringtheexecutionof theentire worktill its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipment and worksrequiredtoexecutethejob.Thebarricadingshallnot beremovedwithoutpriorapprovalofEngineer-in-Charge. Note:One-time payment shall be made for providing barricading from start of work till completion of work including shifting 16 1 Rm 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.16 Metal Beam Crash Barrier Type - A, "W" : Metal Beam Crash Barrier (Providing and erectinga"W"metalbeamcrashbarriercomprisingof3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conformtoIS:1367andIS:1364,metalbeamrailtobefixed ontheverticalpostwithaspacerofchannelsection150x 75 x 5 mm, 330 mm long complete as per Section 810 of specifications 17 1 Rm 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

1.17 Solar powered Road Marker SolarpoweredRoadMarker(SolarStud) Supplying and fixing solar raised Pavement markers made of polycarbonate moulded body with circular shape, solar powered, LED self-Illumination in active mode, 360-degree Illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall supportaloadof20000kgtestedinaccordancetoASTMD 4280, The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 c to 70 c colour of lighting could be provided in red or yellow (amber) as per requirement andtypicalfrequencyof blinkingis1Hz. There shouldbecurrentlossesoflessthan20microamperesat 2.4 v in sleep charging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height width and length of the markershallnotlessthan10mmx100mmx100mm.Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilograms fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxyresinbasedadhesiveandcompleteasdirectedby theengineer. 18 1 Each 1 Excess(+) Full Conversion INR 1.02 Construction of chamber for 100mm sluice plates item2 213 Nos

1.18 Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-moulded, thermoplasticbodywithan isosceles trapezoidal structure of length, width and height not less than 15cm, 10cm and 10cm respectively and thickness not less than 1.8mm, the body structure shall be rounded at its acute angle, all the corners and edges. The plastic used for mouldingtheMedianMarkershallhaveaminimumNotched IzodImpactstrengthvalueof600J/matroomtemperature, whentestedinaccordancewithASTMD256andshallretain at least 70% of this value when subjected to accelerated weatheringfor1000hrsasperASTMG155orUL746C.The Median Marker shall have rectangular-shaped, fluorescent yellow colour retro-reflective sheeting of size not less than 8.5cm*8.5cm and with fully reflective micro prismatic cube cornersasitsretro-reflectiveelementsasperIRC672022 and ASTM D4956 type XI specifications reflectivity values. The retro-reflective sheeting shall be one or both sides of the Median Marker and shall be edge protected with no exposededgeswhichwillpreventedgelifting,vandalism, sheetingdamage,etc.TheMedianMarkershallbefixedby a combination of epoxy adhesive and grouting 19 1 Each 1 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

1.19 Providing and Fixing of ABS Speed Braker of 100 ton Capecity Pasting with necessary etc 20 1 Rm 1 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

1.2 ProvidingandfixingAluminium-backedflexibleprismatic sheeting consisting of yellow coloured flexible prismatic sheetingwithnon-metallicprismaticlensasretroreflective elements and conforming to ASTM D 4956-09 Type-VI specification values for rebound able sheeting. AFP sheeting shall be of 1ft width with a 50-micron thick Aluminium (Al) foil with pressure sensitive adhesive and liner.AFP sheeting shall have screen printed arrow/slant line pattern in blackcolour ontop and shall not crack when testedforflexibilityaspersectionS2.2.2ofASTMD4956- 09. The AFP sheeting shall be applied with a neoprene contact adhesive with Polychloroprene as base and the edges of the product shall be sealed all around with a two- partepoxybasedstructuraladhesiv 21 1 Sqm 1 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words