Annual Maintenance Contract for Miscellaneous civil works, Upkeeping and Gardening at Koyla Bhawan, BCCL HQ for a period of 2 (Two) Years

Amount

PART-A (Miscellaneous Civil Works Such as Wood work,Painting,Sanitary system,Pipeline,Tile works etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases.

Centring and shuttering including strutting, propping etc. and removal of form for : Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards.

Centring and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete(32 mm Dia)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity-white

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

Providing and fixing white vitreous china laboratory sink including making all connections but excluding the cost of fittings. Size 600x450x200mm

Providing and fixing brass bib cock of approved quality 15mm nominal bore

Providing and fixing brass stop cock of approved quality : 15mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 15mm nominal bore

Providing and fixing soil, waste and vent pipes (100 mm dia)

Providing and fixing soil, waste and vent pipes(75 mm dia)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete(100x100x100 mm)

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete(75x75x75 mm)

Providing and fixing plain bend of required degree(100 mm dia)

Providing and fixing plain bend of required degree(75 mm dia)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 15mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.25 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.32 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.40 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.50mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.80mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete15 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.25 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.32 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.40 mm dia

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete.50mm dia

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20mm nominal bore, weighing not less than 40 gms

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.15mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.40 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.50mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: 110 mm bend

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of thickness 4 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with Pre-laminated particle board with decorative lamination on both sides

12 mm cement plaster of mix :13.1.2 1:6 (1 cement: 6 fine sand)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. completeTwin rubber stopp

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-chargeWith stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :One or more coats on old work.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: Two coats

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level-1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement:1½ coarse sand:3 graded stone aggregate 20 mm nominal size)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)-Ordinary cement without any pigment

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level-Thermo-Mechanically Treated bars

Welding by gas or electric plant including transportation of plant at site etc. complete.

Finishing wall with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Felling trees of the girth (measured at a height of 1 m above groundBeyond 120 cm girth upto and including 240 cm girth level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth upto and including 240 cm girth

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1cement: 4 coarse sand)

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats

Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer.

French spirit polishing : One or more coats on old work.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Supplying and stacking at site. Moorum.- including laying all complete as per the instructions of EIC

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. bituminous portion

Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc.. complete.

welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately) :

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing bright finished brass handles with screws etc. complete :75mm

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and Fixing of Urinal Top inlet with all fittings(Jaquar) as per direction of E/I

Providing and Fixing of Bottle Trap with all fittings(Jaquar) as per direction of E/I

Supplying/fitting/fixing Hand Shower( Health Faucet) with 8mm dia,1 meter long flexible tube & wall hook ( ALD - 573/Jaquar or equivalent Make ) complete job as per instruction of Engr.I/c

Providing and Fixing of AC beading as per instruction of I/c

Repair and easy adjustment of 12 mm thick frameless toughened glass door shutter of approved brand and manufacture and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Two in one bib cock of approved brand(Jaquar or equivalent) as per instruction of I/C

P/F white vitreous china pedestal type water closet- W.C. pan (Jaquar) white solid plastic seat and lid

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Cleaning of sewerage line by mechanical means as per direction of E/I

Painting of chequrred tiles as per instruction of I/c

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge

Providing A.C. hole cutting in brick masonary & making good the damages to walls including cement plaster, 12mm plywood frame of 100mm wide and complete to match existing surface and disposal of malba/rubbish to the dumping within 15m lead complete job as per direction of E/I,

Re-fixing 12mm thick pre laminated partical board with decorative one side complete job as per direction of E/I

Re-fixing aluminium door shutter reparing including necessery fitings such as angle clit/aluminium snaps beading/EPDM rubber neoprene gaskit/ steel secrew etc complete job as per direction of E/I

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

S/F/F 19mm thick BWP ply-wood laminated with sunmica both side

S/F/F 6mm thick BWP ply-wood board laminated with sunmica one side

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia and below

Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete Triple strip vertical type

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Providing and fixing 4mm thick ACP complete job as per direction of E/I

Supplying/fitting/fixing white vitreous china Couple closet(jaquar oe equivalant) WC approved shape including providing & fixing seat cover & cistern fitting including seat cover & cistern fitting nuts, bolts & gasket,complete job as per instruction of Engr.I/c

Wall painting with Dulux valvet touch paint of approved brand and manufacture to give an even shade as per direction of E/I

Providing and fixing of ceramic pot complete job as per direction of E/I

Providing and fixing of table top wash basin of Jaquar or equivalent of size

Providing and Pasting of wallpaper of Approved make and as per choice of E/I complete job

Providing and Fixing with silicon and double tape of Glass Mirror with all side polished complete job as per direction of E/I

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 6 mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse and : 6 graded stone aggregate 20mm nominal size).

Supply of plumber as and when required as per dirn of EIC

Supply of Carpenter as and when required as per dirn of EIC

Brick work with fly ash brick F.P.S (non modular) bricks of class designation 10 in foundation and plinth in :Cement Mortar 1:6(1 cement :6 coarse sand )

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint

Providing and applying SBR latex like Dr. Fixit pidicrete URP or similar product for repairing of spalled concrete floors,beams,columns,jhajja,slab etc. old plaster and the operation shall be carried out after scraping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Including of all labours,materials,plants and tools etc.

Providing and applying fibre reinforced elastomeric liquid water proofingmembrane with resilient acrylic polymers having Sun Reflectivity Index (SRI)of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat ofself-priming of elastomeric waterproofing liquid (dilution with water in theratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). Theoperation shall be carried out after scrapping and properly cleaning the surfaceto remove loose particles with wire brushes, complete in all respect as per thedirection of Engineer-in-Charge.

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.)Epoxy injection grout in concrete/RCC work of approved make

PART-B (Upkeeping of Toilet )

Upkeeping of different toilets, bathrooms and connecting area including cleaning of DADO, Skirting, WC pan (Indian type and European type), wash basin, urinals, glass, cistern etc. at least four times and as & when required in a day (excluding Sunday & Holiday) by hand dusting and clearing with soap solution, acid, detergents, Phenyls, Harpic etc. and with equipment like brush, Broom Stick, bucket, stick, etc and to make toilet clean, functional clear, hygienic, aromatic (using urinal mat) all complete with tools, tackles & consumables as per instruction of Engineer-in Charge.Clause(i) Minimum number of sweeper deployed per day will be 15.00 nos. in case of any deduction in sweeper, proportinate deduction will be made acordingly as per total coverage of area. Clause(ii) The bidder has to ensure payment of PF/EPF as prescribed in NIT. SCOPE OF WORKS: (a) Contractor shall maintain existing Bathrooms,Dado,Basin,WC Pan,Urinal Top,Mirror,Corridors,flower areas of service building etc. (b) Contractor will ensure Functioning of Urinals,WC Pan, etc. as and when required by Engineer-in-charge. Plumbing work is to be done wherever required. c) Contractor shall be responsible for arrangement of plumber as and when required by Engineer-in-charge and maintaining the same (Cost of the plumber to be paid separately to the agency). (d) The Urinal mat,napthalene ball,harpic,mopping stick,broom stick, wiper stick etc., as and when required. (The cost of the same shall be paid separately to the agency). e) Water will be made available by the department and the contractor will use the water by using Buckets.(The cost of the Bucket shall be paid separately to the agency). (f) Frequency of cleaning of toilet should be 4 or more times in a day and as directed by the engineer incharge as per site requirement. (g) Maintenance work as desired by Engineer-in-charge on priority basis has to be strictly followed by the contractor. (h) The contractor will look after the work and will maintain coordination with the department and will attend to the complaint. (i)The Bathrooms and connecting areas, is to be kept clean from rubbish, and any other wastage materials. (j) Total area to be maintained per day = 750 sqm (Approx) by engaging 15 Nos. of unskilled manpower .

Supplying Phenyl Black Doctor brand or equivalent in a 450 ml container as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Lizol floor cleaner 500ml container as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Detergent Powder (Wheel or equivalent) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Acid Toilet Cleaner(400ml container) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying of Godreg Aero Packet as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Napthalene Ball (In adequate concentration) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Mopping stick steel make(4' long) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Wiper stick Steel make(5' long, blade size 1'6"X6") as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Broom Stick as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Toilet Brush(2' long) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Harpic (500ml pack) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Colin Spray (500 ml pack) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Plastic Bucket 15 litres Capacity as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Plastic Jug 1 Litre Capacity as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Bleaching Powder(White) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Fresh and Cleaned Urinal Mat/Screen Used in Urinal Pot as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Room Freshener Godrej air spray as per requirement in a phased manner as per instruction of Engineer In Charge (empty bottle to be submitted by contrctor to the department)

Supplying wet and dry cotton pad floor mop 67x14x5(18-inch) flexible moving head (simba or equivalent) as per requirement in a phased manner as per instruction of Engineer In Charge

Supplying Cotton Refill Wet and Dry Mop(18-Inch) (SIMBA or equivalent) as per requirement in a phased manner as per instruction of Engineer In Charge

PART-C (Gardening)

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriageup to 1 km (sludge measured in stacks will be reduced by 8% for payment).

Mixing earth and sludge or manure in proportion specified or directed.

Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).

Maintenance of lawn includes weeding, cheeling the grass, for the ground top dressing with sludge or manure of the same with the forked soil watering & maint. of lawn for 30 days to keep healthy & rich growth free from incuts weeds, & disposal of rubbish as per directed including supplying good earth if needed but excluding cost of sludge, manure etc. complete as per direction of EIC. .

Maintenance of flower pot including dressing of plants. Watering manuring medicine etc. but excluding the cost of manure and medicine(Twice a month)

Maint. of flower bed including/plants and ornamental plants shrubs hedges including weeding, cheeling the grass, for the ground top dressing with sludge or manure of the same with the forked soil watering & maint. bed/ plants for 30 days to keep healthy & rich growth free from incuts weeds, & disposal of rubbish as per directed including supplying good earth if needed but excluding cost of sludge, manure etc. complete as per direction of EIC.

Providing Cement Flower Pot of Size dia 13" depth 10" and thickness 7/12"

Providing Cement Flower Pot of Size dia 10" depth8" and thickness 1/2"

Providing and fixing of Seasonal Plants for (SUMMER SEASON) as per direction of Engr.I/c (PUTICA ,COSMOS, KOCHIEA, SUNFLOWER, GINIA, SILACIYA, BUTTON FLOWER ) etc.

Providing and fixing of Seasonal Plants (WINTER SEASON) as per direction of Engr.I/c (DALIA, SALVIYA, CHINA MARIGOLD, INKA MARIGOLD, PITUNIYA, AUSTER, FLOX, PANSY, GULAWADI, HOLI WAX, DIANTHUS) etc.

SUPPLYING,FIXING OF ORNAMENTAL PLANTS (ROSE HYBRID, THUJA, AERICA PALM, EKJURA, BEGANVILA) etc.

SUPPLY OF MANURE (KARANJ KHALLI)

SUPPLY OF MANURE (DAP)

SUPPLY OF MANURE (UREA)

SUPPLY OF MANURE (BONE MEAL)

SUPPLY OF MANURE (ROSE MIXTURE)

SUPPLY OF MANURE (ORGANIC)

SUPPLY OF MANURE (THIMAT)

SUPPLY OF MANURE (SUPER PHOSPHET)

SUPPLY OF MANURE (BABEISTINE)

SUPPLY OF MANURE (ROGER)

PART-D (Upkeeping of Koyla Bhawan premises )

Up-keeping of service buildings including daily brooming, sweeping Mopping & cleaning of all the floors with detergent bleaching powder etc all completed with tools and tackles and consuables and dusting/cleaning of its adjacant walls for Entire koyla bhawan building excluding Director's and CMD Chambers including collection of garbage at suitable places inside the Service Buildings and periphery of Koyla Bhawan as per instruction of Engineer-in-charge. (Area to be taken will be all service building brooming, sweeping Mopping & cleaning with dusting/cleaning of walls daily as per direction of EIC.Total area to covered in one day is 15500 sqm.) Clause(i) Minimum number of labour deployed per day will be 15.00 nos. in case of any deduction in sweeper, proportinate deduction will be made acordingly as per coverage of total area. Clause(ii) The bidder has to ensure payment of PF/EPF as prescribed in NIT

Up-keeping of service buildings by sweeping of road and road berm with jharu/machine with all completed with tools and tackles and consuables including premises and surrounding areas including collection of garbage at suitable places inside the Service Buildings and periphery of Koyla Bhawan as per instruction of Engineer-in-charge.(Area to be taken will be all service Road, Basement, all parking, backside area of Koyla Bhawan building brooming daily.) Clause(i) Minimum number of labour deployed per day will be 2 nos. in case of any deduction in labour, proportinate deduction will be made acordingly as per total of area. Clause(ii) The bidder has to ensure payment of PF/EPF as prescribed in NIT. SCOPE OF WORKS: (a)Frequency of brooming,cleaning and mopping should be at least once in a day or as directed by the engineer incharge as per site requirement. (b) Maintenance work as desired by Engineer-in-charge on priority basis has to be strictly followed by the contractor. (c) The contractor will look after the work and will maintain coordination with the department and will attend to the complaint.

Total impact of GST for the purpose of CTC

M/S ANIL KUMAR RAI

S S ENTERPRISES

M/S B RAI CONSTRUCTION COMPANY

JALNIDHI BITUMEN SPECIALITIES PVT LTD

NIS Management Limited