REPAIR AND REPLACEMENT TO THE VARIOUS STREET LIGHT/ SECURITY/ PERIMETER LIGHT / TIMERS AND LT CABLES ALONGWITH MISC ITEMS UNDER GE (AF) BAREILLY

Amount

Dismantling / taking down LED fitting of any capacity street light / security lights/High Mast of any capacity & description from existing LT pole/walls/mast , at any height and refixing the fittings in existing / another location after repair work or carrying to MES store and all as directed by Engg-in-charge. Note :- (i) Replacement of defective parts accessories shall be measured and paid separately under relevant item of Sch 'A' as supply and fix in repair. (ii) Transport and T & P i.e. Ladder, spanners or any other equipment for repair of street light shall be provided by Contractor and cost for the same deemed to be included in respective item of Sch 'A'. (iiii) No light and any other on off problem and minor repair cost is also included in quoted rates. (iv) if contractor did not not rectify the complaint within 24 Hrs, a penalty of Rs 100 per complaint per day will be imposed.

Supply only LED Electronic driver 90/100 W, 0.7A, 240V, 50Hz operating range 120-277V of existing Make: Philips/crompton/Bajaj/Havells/wipro or equivalent complete all as directed by Engr-in-Charge.

All as above item No 02 but Supply only LED Electronic driver 120/150 W complete all as directed by Engr-in-Charge.

All as above item No 02 but Supply only LED Electronic driver 200 W complete all as directed by Engr-in-Charge.

All as above item No 02 but Supply only LED Electronic driver 25 to 50W complete all as directed by Engr-in-Charge.

Supply Only for replacement of High efficiency long life CREE LED chip in modules with LED bulbs complete each MC-PCB of security/flood light/highbay lights of capacity 25 watt to 45 Watt complete set including nut bolts and other reqd minor items 0.7A, 240V, 50Hz operating range 120-277V as per existing make:Havells/Bajaj/Crompton/Philips or or equivalent as directed by Engr-in-Charge.

All as per above item No 6 but of cap 50 to 100W complete all as directed by Engr-in-Charge.

All as per above item No 6 but of cap 120 to 150W complete all as directed by Engr-in-Charge.

Supply and Replacement of shock proof, rust proof, fire retardant non transparent SMC Kiosk pole box of internal size not less than 300x200x105mm with hinged door, for out door duty with and including four Nos. insulated aluminium bus bar of 60 Amp rating, mounted on unbreakable insulators, 10 Amp MCB SP with aluminium lugs of suitable size up to 50 sq.mm cable including 02 Nos. 40x3mm flat iron clamps duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including suitable size nut-bolts, washers etc. all as specified and directed.

M&L for Preparation of surfaces of steel electric poles/ masts of height up to 7.5m (exposed) by scraping with emery paper and making free from rust, dust and any foreign material and applying one coat of aluminium paint including lettering on poles such as Pole No and source point of electric supply with white enamel paint on black back ground, zebra painting up to 1.2 m height from ground level with two coats of synthetic enamel paint in 30cm height of alternate bands all as specified and as directed.

Supply and replacement of Traffic Signal Light LED based, solid state, low power consumption, powder coated CRCA/ Poly carbonate body with toughened front glass with rubber gasket, ultra bright AlGaAs LED in red and green colour 1x20 watt LED, working voltage: 150-300 V AC complete all as specified and as directed.

Supply and install LED post top lantern with spun aluminium housing with opal acrylic diffuser, not less than 15W, IP 65 protection complete including necessary cable connection all as specified and as directed including taking down existing unserviceable fitting. [Cat No. RUBYMINIPT 15WLED830PSYMTOPC of Make: Havells or equivalent in Philips/Bajaj]

S&F LED street light fitting 70W, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66 with high power LEDs and unique peanut lens to ensure uniform light distribution complete with all accessories pre-wired including taking down existing unserviceable fitting complete all as specified and directed. Make : ENDURACITYLINERNEO SL70WLED757 PASYBOTG (ENDURA CITYLINER NEO) of Havells or equivalent in Philips/Wipro.

All as per item No-13 above but S&F LED Street light fitting 35 W all as specified and directed. Make: Cat No ENDURASUNDOWNSL35WLED765PASYBOPC of make: Havells or equivalent in Bajaj/Philips/crompton.

All as per item No-13 above but S&F LED Street light fitting 90 W all as specified and directed. .Make: ENDURASUNDOWNSL90 WLED765PASYBOTG of Havells or equivalent in Bajaj/Philips/Crompton

S&F die cast aluminium LED Flood light not less than 120W IP 66 with high power LEDs, integral flood light with driver inside a PDC housing including all fittings, clamps, angle frame etc for fixing on wall/ pole etc with all accessories pre-wired including taking down existing unserviceable fitting complete all as specified and directed.[Make: Cat Part No. JETAIRISFLS 120WLED757APWBLTG of make: Havells or BVP192 LED110 CW HO NB FG GR PSU of make: Philips or equivalent in Crompton as directed by Engr-in-Charge).

All as per item No 16 above but of capacity 100W [Make: Cat Part No. FLAREULTIMACA100WLED757PWBLTG of make: Havells/Crompton/Philips or equivalent as directed by Engr-in-Charge).

S&F in replacement power contactor 415 volts, 32 Amps, 3 pole including Auxiliary contact complete all as specified and as directed. [Cat No. MNX 32 of Make: L&T, Legrand, Schneider or equivalent as directed by Engr-in-Charge]

Taking out of existing LT UG cable of size 3½/4 core, 16 to 35 Sqmm including taking out protection bricks complete all as specified and directed.[Note: Earth work & excavation will be measured and paid separately].

Supply and laying or fixing or passing through pipe of following size of 1100 Volts grade heavy duty XLPE armoured cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed nominal cross section stranded conductor complete all as specified and directed for the following Size.

(a) 35 Sq mm 3.5 core

(b) 16 sqmm 4 core

(c) 25 sqmm 3.5 core

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in any type of soil for laying of cables, etc of LT Cable and stay assembly all as specified and directed .

M&L for dry sand cushioning to underground cables with 8 cm thick before laying of cables and 15 cm thick after laying and stretching of cable complete all as specified and directed.

Supply & Laying well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete all as specified and directed.

M&L for relaying of old sub class 'B' bricks all as specified and directed by Engr-in-Charge

Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removal of excavated soil to a distance not exceeding 50 Mtr depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.

M&L in replacement for 40 mm dia of Tubes light grade galvanised with all fitting laid in trenches or inserting in horizontal boring complete all as specified and directed.

M&L for Horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes of 40mm bore and making good the disturbed surface complete all as specified and as directed. [Note: GI pipe will be measured and paid separately]

M&L in replacement for pole mount street light bracket made of GI pipe light grade 40mm dia, appx 0.65 m long welded at an angle of 120º to MS cap made of MS sheet of suitable thickness and of length 6” and dia suitable for fixing at the top of steel tubular poles, fixed with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and directed

M&L in replacement for street light bracket made of GI pipe medium grade 40mm dia, appx 1.20 m long bent to shape suitable for fixing street light fixed to pole with 2 Nos of MS FI brackets with nuts and bolts complete including painting with two coats of aluminium paint over a coat of zinc chrome primer all as specified and directed

S&F in replacement three core PVC insulated flexible cable cord 1.5 sq.mm multi stranded copper conductor flexible cables 1100 Volt grade complete for making connection from pole box to street light complete all as specified and as directed.

All as per Item No. 29 herein before but of size 2.5 sq.mm complete all as specified and as directed.

S&F in replacement twin core PVC insulated multi-stranded aluminium conductor (un sheathed) flexible industrial cables 1100 Volt grade of size 6sq.mm complete all as specified and directed.

All as per Item No. 31 herein before but of size 10 sq.mm complete all as specified and directed.

S&F in replacement of SP 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement of SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement of TPN 16 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in DB complete with connection testing and commissioning complete all as specified and directed. .

Supply and fixing in replacement of LED bollard light 8 to 11 W, new generation , energy saving, environmental friendly, aesthetically designed aluminium landscape IP65, IK-07, luminaire for diffused lighting with high power LED as light source of colour white/warm white complete all as specified and directed by Engineer-in-Charge. Make Havells/Bajaj/Philips or equivalent as directed by Engr-in-Charge).

Supply and install in replacement outdoor type digital street light timer panel, 1 Ph, 6kW, 230 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and directed.

Supply and install in replacement outdoor type digital street light timer panel, 3 Ph, 12kW, 415 Volts AC, IP-54 protection with necessary contactor, relay, MCB, internal wiring with FRLS copper conductor cables complete all as specified and directed.

Dismantling of electric pole up to 9 metre long and taking out from the trench with and including necessary excavation, earth work, breaking of pole foundation and making good the disturbed surface complete all as specified and directed.

Supply, transporting erecting in true vertical position, steel tubular swaged pole 410-SP-22, 9.00 meter long complete with mild steel base plate pole cap finial taper plug, bolts, nuts, washers etc including painting two coats of aluminium paint over a coat of red oxide primer including 3 Nos of bands/straps painted with single red and white colour (300 mm each) in alternate layer from plinth block marking of pole number with black synthetic enamelled paint 2.5 cm height including one coat nack bituminous paint on steel surface embedded in concrete foundation complete all as specified and directed.

M&L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in pole foundation, filling and mass concrete complete all as specified and directed.

M&L for providing plain cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate), as in pole coping and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for providing plain cement concrete type 1:2:4 Type B2 (using 40 mm graded stone aggregate), as in pole coping and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

GEETA ENTERPRISES (BID ID -3445538)

VINYAK TRADERS (BID ID -3447233)