Repair to leakage, seepage, joinery, flooring, ceiling, sanitary fittings, plastering, painting, approach path, drain and internal electrification of certain units under AGE BR-I of GE Dehradun.

Amount

S&F powder coated aluminium anodised door with frame and shutter, and glazing 4.8 mm thick tined glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.18 mm thick fixed with rawal plug width;- 85x44.5x1.18 mm thick Bottom;- 112x44.5x1.18 mm thick Style;- 85x44.5x1.18 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bold 9.9 mm dia shoot 200 mm long Mortice lock S/S - 100 mm 4 lever Aluminium stopper cleat aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed (ii) PCC shall be measured and paid seperatelly

S&F powder coated aluminium window double shutter with frame and shutter and glazing wire gauge, rubber gasket, aluminium glazing clips, aluminium peg stay, iron mongary etc including taking down complete all as specified and directed. aluminium sections shall be given below: - Frame;- 85x44.5x1.18 mm thick fixed with rawal plug Style;- 44.5x44.5x1.18 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 100mm Aluminium tower bold 9.9 mm dia shoot 150 mm long Glass;- 4.8 mm thick frosted/ plain glass ( as specified) wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm Aluminium stopper cleat aluminium hinges 100 mm long powder coated

Taking down Chowkats with shutter of any description exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specifed and directed.

Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specifed and directed. .

S & F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F in repairs 18 to 20 mm thick solid one side laminated and other side white PVC board for cupboard shutters including suitable PVC frame as per specification and drawing complete all as specified and directed.

S&F in repairs 6 mm thick solid plain light colour PVC board for cupboard sides /shelves complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. of size exe. 1 Sqm but n. exe. 2 Sqm each complete all as specifed and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole & including dismantling old section complete all as specifed and directed.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&Fin repair 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size solid in one piece stainless steel handles, 204 grade and fixed with stainless steel screws complete all as specified and directed.

S&F in repair magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 250 mm long stainless steel 204 grade bright finish sliding door bolt (bolt type, dia of bolt 16mm) with hasp, staple , fixing clips, fixing bolts and sliding bolt of stainless steel and fixed all as specified and directed.

S&F floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

S & F in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Aluminium window shutter size n.exc 1 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all a specified and directed. (Note :- Butt hinges and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 1 Sqm but n.exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots, locks and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge ,Pivot, locks and anodised aluminium section shall be measured and paid seperately)

Taking down Aluminium door shutter size exc 2 Sqm including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, pivots and refixing in the same opening to make the door functional complete all as specified and directed. (Note : - Butt hinge, Pivot, Floor spring and anodised aluminium section shall be measured and paid seperately)

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads .complete all as specified and directed

S&F 12mm thick toughened glass in any size or shape for door, window etc.including hacking out existing glass complete all as specified and directed.

S&F in repairs 600mm size solid in one piece stainless steel handles, all in 304 grade and fixed in glass doors as directed complete all as specified and directed by Engr-in-Charge.

S & F in repairs pivot hinges for glass door/window complete all as specified and as directed.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane.complete all as specified and directed

S&F glazing (5.00 mm thick float glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etc. complete all as direted by engineer-in-charge . (Note : - Cost of aluminium snap beading and EPDM rubber/ neoprene gasket, Hinges if required shall be paid and measured seperately under supply only)

Supply only anodised aluminium snap beading suitable for aluminium door window complete all as specified and directed.

Supply only EPDM rubber/ neoprene gasket suitable for aluminium door window complete all as specified and directed.

Supply only stainless steel hinges of 75/100 mm size for aluminium door window complete all as specified and directed.

S & F in repair powder coated aluminium grill of size 75x75x4-5 mm thick size fixed with aluminium frame including taking down old grill complete all as specified and directed

S&F in repair Double action floor spring of approved brand and manufacture conforming to IS: 6315 hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and making good to floor to match with existing floor complete all as specified and directed by engr-in charge.

M&L MS framed work as in door or gate angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W. E-250 quality 'B' .including dismantling complete all as specified and directed

Dismaltling of AC sheeting any type (corrugated/semicorrugated, etc) in roof covering etc complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified and directed

Dismantling of timber scantlings 40 Sqcm and over in section unframed work, in any position complete all as specified and directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O complete all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F in repair of steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M&L welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed.

S&F in repairs powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick retro reflected glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.18 mm thick Bottuom section;-112x44.5x1.18 mm thick Complete all as specified and directed by the Engr in charge

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F in repair Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick, including decorative, brackets, decorative finials at both ends complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existing tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existing tubing complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive floor finishes including demolition of existing concrete complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggreate), 75 mm thick as in plinth protection, finishing the surface even & fair without using extra cement the plinth protection shall be laid in alternate bays n exe 2 Sqm, 10mm joints shall be provided, joints shall be filled with bitumen mastic, bitumen mastic comprise of 1 Part of Hot bitumen 85/25 grade and 3 parts of sand all by weight including demolition of existing concrete complete all as specified & directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) complete all as specified.

M&L Glazed ceramic tiles coloured of size 200 x 300 x 6 to 7mm , on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match over and including 10 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old tiles and bedding layer complete all as specified and directed.

M&L for red brick tiles (clay tiles) of 10-12 mm thick size 15 x 5 to 7.5 cm as in vertical surfaces such as wall dado's etc over 15 mm thock rendering CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces of tile and including dismantling of old tiles& bedding layer and removing debries outside the premises complete all as specified and directed.

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick in CM 1:6 and including dismantling of old tiles complete all as specified and directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and including dismantling of old tiles and bedding layer complete all as specified and directed

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layers of mortar 15 mm thick in CM 1:6 and including dismantling of old tiles and bedding layer complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment over well rammed sand filling including demolition of existing floor complete all as specified and as directed.

M&L for 20 to 25 mm thick machine cut Kota stone slab as in floor, laid over 15 mm thick screed bed or bedding layar in CM (1:6) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L for machine cut granite tiles 20 to 25mm thick, in riser of steps, skirting, dado etc laid over & including 10mm thick rendering (bedding layer) in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding of edges and polishing complete all as directed.

M&L for granite stone 18 to 20mm thick glazed (table rubbed and polished) fixed as in staps, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks, old size, straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

M&L brick work with sub class ’B’ bricks, old size , straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

Removing / cutting trees vegetation, digging out roots from concrete or brick wall, filling holes on building wall / roof / chajja etc applying and making good with epoxy mortar (Asian/Berger) and applying surface treatment to match with existing specifications complete all as specified and directed.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separately.

M&L rendering 15 mm thick in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 on brick / concrete surfaces with water proofing compound, finished surfaces even and fair without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separately.

M&L 10 mm thick plaster in CM (1:4) on fair faces of ceiling / concrete surfaces complete all as specified and directed.

Supply only liquid water proofing compound as per manufacturer instructions. complete all as specified and directed.

M&L, preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth as specified and directed.

M&L for preparation of old concrete floor surface and applying one coat of floor paint complete all as specified and directed.

M&L one coat of white wash on old ceiling surfaces including preparation complete all as specified and directed.

M&L one coat of white wash on old wall surface including preparation complete all as specified and directed.

M&L one coat of oil bound distemper in any tint on walls including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as directed.

M&L one coat of cement base paint on old surface of external wall including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed.

M&L two coat oil bound distemper of any tint over a coat of primer on walls surfaces including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as directed.

M&L two coat of cement base paint on external wall surfaces over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as directed.

Material & Labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt sistance interior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on surfaces complete all as directed.

M&L two coat of weather proof exerior emulsion paint in any tint over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as directed.

M&L two coat of damp proof paint in any tint on wall over a coat of primer including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper complete all as directed.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of Synthetic enamel Paint complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

S&F in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

M&L for false ceiling made out of E-board classic of size 600x600x4mm thick, GI frame consisting of main Tee of size 38.50x24.00 mm and cross Tee of size 28.50x24.00mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24.00x24.00x0.4mm thick powder coated suspended with GI wire 3mm dia and up to 2mtr long complete including pluging fixing of angle to brick walls with steel rawl plugs @450mm c/c complete all as specified and directed by Engr-in-Charge.

S&F PVC Wall Lining consisting of 5mm thick of wood grains PVC sheet inclusive of solvent cement and fixing to walls on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 1 to 2 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including dismantling of existing water tank and remove from site complete all as specified and directed.

S&F Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including dismantling of existing water tank and remove from site complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm dia 450 mm long with bras fly nut at both ends complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in epoxy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repair 75 mm cast iron floor trap, spun casted with grating including jointing to waste pipe fixed in cement concrete type B1 (1;2;4) complete all as specified and as directed by the Engr-in-Charge.complete all specified and directed.

S & F in repair 8 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

S&F in repair looking mirror 450mmx600mm x 5 mm thick mounted on decorative type PVC frame fixed with PVC rawal plug with CP brackets screw fixed complete all as specified.

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. KUP-35001PM/Hindware Cat Part No:F370001/Parryware Cat Pat No.T4302A2

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S & F in repair 15 mm dia bore chromium plated concealed stop cock, complete all as specified.

S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions Complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : - JAGUAR Cat Part No FLR-CHR5043N-40053/Hindware Cat Part No F280002MD/Parryware /Equivalent Kohler

S&F in repair soap dish, brass, chromium plated, 150 mm size fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glassshelf with chromium plated guard and railing complete all as specified and directed.

S&F in repair stainless steel grade 304 plate rack of 1.0 mm thick over all size 600 x 750 x 220 mm of standard pattern complete all as specified & directed.

S & F in repair stainless steel grating square 100 mm size complete all as specified. Make : Prayag Cat No. FT-77 or equivalent in Cera

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

M&L cleaning of water storage tank 500 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner complete all as specified and directed.

S&F in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in repair of Vitreous china wash down water closet pan (pedestal pattern) (cascade) , white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge.Make : - JAGUAR bearing CAT Part No FLS-WHT-5351/ Hindware CAT Part No 92098 P-21 including trap (P or S type)/ Parryware Cat Part No VERVE10269

S&F in repairs vitreous china water closet Padestal pattern (white) including fixing bolts, EWC plastic water closet seat cover and back closed pattern with flat bottom cover with aluminium /PVC hing device complete all as directed.

S&F in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed by Engineer in Charge. Make : - Jaquar/URS-WHT-13261 size 355x 310 x 535 mm/Hindware vinenzia Cat Part No 60023 size 31.5 x 34.5 x 66 cm/Parryware Cat Part No Aquaseal and neutral size 360 x 345 x 565

S & F 32 mm dia waste fittings, brass chromium plated for Glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in cement and other end fixed complete all as specified and directed.

S&F in repair bib taps long body, brass, fancy type, chromium plated, screwed down, screwed for 15 mm bore complete all as specified and directed. Make : Jaquar CAT part no.ALI-85037/Hindware CAT part no. F-370004 or equivalent in Parryware.

S&F in repair 15mm dia chromium plated brass sink mixer with swivel spout (wall mounted) or mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified & directed.Make : Jaquar CAT part no.CQT-CHR23309B/Hindware CAT part no. F280020CP/Parryware CAT part no. G3335A1

S & F in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed. Make : Jaquar CAT part no. CON-CHR-281 KN/Hindware CAT part no. F280018 CP/Parryware CAT part no.G4017 A

S & F in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make : Jaquar CAT part no. SOL-6001B/Hindware CAT part no. F450009/Parryware CAT part no. G0665A1

S&F in repair CP brass angle cock 15 mm bore complete all as specified and directed. Make : - Jaquar CAT part no. CON-CHR-053KN/Hindware CAT part no. F200007 CP/Parryware CAT part no. G0253 A1

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. Make :Parryware CAT part no. T9941A1/ Hindware CAT part no. F160013/ Jaguar CAT part no,.ALD-573

S&F in repair Jet spray (L-Band) with 1 mtr expandable tube & hook complete. Make : Prayag Cat No.BEA-18 or equivalent in Parryware/ Hindware

S&F in repair Plastic Water Closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repair toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S & F in repair Towel rack long of stainless steel grade 304 complete all as specified and directed. Make : Jaquar CAN-CHR-1181S/parryware (T6008A1)/Hindware-F-890012CP

S & F in repair PVC waste pipe flexible type 32 mm dia with coupler for WHB / sink etc complete all as specified and directed .

S & F in repair PVC waste pipe for urinal flexible type with 40 mm dia coupler complete all as specified and directed .

Demolition and breaking up drain pipes of 100/75 mm bore (salt glazed stoneware, AC or reinforced concrete/PVC) set in cement mortar complete all as specified and directed.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

S & F 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

S & F UPVC (SWR) bend, 75 mm bore' complete all as specified and directed.

S & F UPVC (SWR) junction single, (Single T) equal or unequalnd, 75 mm bore with access door complete all as specified and directed.

S & F UPVC (SWR) bend, 110 mm bore' complete all as specified and directed.

S & F UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe.grouted in PCC 1:2:4 complete

M&L taking out old treatment from existing RCC roof and cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under:- (a) Providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:3 over roof surface mixed with & including WPC as per manufacturers instructions. (b) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg / sqm. (c) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed. (d) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

M&L in repair water proofing treatment on roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation and treating of construction joints, filling of honey combs with polymer modified mortar (Cement: Sand : smart care multipurpose polymer of Asian Paints or equivalent product of Thermax/ Berger ) (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface . (c) Cleaning the surface and applying (Resin & Hardner) smart care Epoxy Primer 2k of Make Asian paints or equivalent product of Thermax/ Berger ) on the cleaned surface for bonding of PU magnum with the existing concrete surface. (d) Supplying, providing and applying waterproofing treatment to Terrace area with Asian Paints Smart care PU magnum, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Thermax/ Berger) including all necessary surface preparation, coving using smart care multipurpose polymer, water pond test, etc. complete as per manufacture's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have dual combination of 250% elongation . NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in eppoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including scaffolding)

S & F in repairs PVC bib tap 15 mm dia complete all as specified and directed.

S & F in repairs PVC pillar tap 15 mm dia complete all as specified and directed.

S & laying in repairs of 50 mm dia CPVC pipes SDR 11 and including plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed

S & laying in repairs of 20 mm dia CPVC pipes SDR 11 and including plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed

S&F in repairs 50 mm CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

S & F in repairs 50 mm CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

S & F in repair 50 mm CPVC ball valve complete all as specified and directed

S & laying in repairs of 25 mm dia CPVC pipes SDR 11 and including plain CPVC SDR 11 fittings on walls /ceiling or laying in floors complete all as specified and directed

S & F in repair 20mm CPVC Tank Adaptor complete all as specified and directed

S & F in repair 50 mm CPVC Union complete all as specified and directed

S&F in repair padestal for Wash basin, vitreous China requisite size coplete all as specified and directed.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old u/s S/S complete all as spfd and directed

S&F in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified.

M&L for providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) in louvers and jallies, 25 mm thick (measured solid), including all mouldings form work etc as required but excluding frames, set in cement mortar (1:4) complete all as specified and directed.

S&F in repair runners 45 mm Telescopic (KTS-20) for SS wire basket full extension load capacity 50 kgs complete all as specified and directed. Make :Hexa, Shreeji, Hafele

S & F in repair Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Excavation in post holes ( or similar holes) each not exc 0.5, cum getting out in hard/dense soil and removing surplus soil to a distance not exc 50 metre and making good surface complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in mud stops,top of fencing post foundation, rounded or chamfered on edges complete all as specified and as directed.

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S & F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screwed the other ,or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt n.exc 5cm long dia of neck 5 to 10mm complete all as specified and as directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing of any size complete all as specified and as directed.

M&L mild steel TMT bars10mm dia and over, cut to length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L cleaning of Man hole any depth any size taking out accumulated, soil, sludge any material incl both ends and removal out of MD lands incl manhole cover removing & refixing all as directed by Engr-in-charge.

Cleaning of sewage pipe line 100/150 mm internal dia of depth upto 1 m by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exc 1.5 Km and n.exc 5 Km out side of MOD land complete all as specified & directed by Engineer-in-Charge.

M&L for dewatering and desludging of septic septic tank/sokage well of any size and depth by manually/mechanically (solid contents if not removed by mechanically should be removed by manually) and removing the sludge out side of MOD complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site.

Removing the manholes covers and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried,and making the septic tank and soak well fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent out of MD land using 5000 ltr capacity sewage tanker and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge

Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm. complete all as specified and directed.

Removing excavated material n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point. complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia in cluding PCC bed complete all as specified and directed..

S&F 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar 1:1, complete all as specified and directed.

M&L for concrete bed to drain pipes 150 mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete Type C-2 1:3:6 using 40 mm graded stone aggregate complete all as specified and directed.

M&L 50 mm for reinforced precast cement concrete 1:1:2 with 1.25mm thick MS sheet painted with bituminous paint around the manhole cover (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.) vibromatic, articles with plain faces including necessary form work using surface vibrator,including demolition complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of schedule 'A').

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L for construction of brick masonry soakage well, internal dia 2.40M dia & depth 3.00M including excavation in any type of soil complete all as specified and shown on TD drawing & directed.

Supply and fixing, testing in replacement of maintenance free lead acid sealed battery 12 Volts 7 Ah complete all as specified and directed.

Supply and fixing in replacement of maintenance free lead acid sealed battery 12 Volts 18 Ah complete all as specified and directed.

Supply and fixing in replacement of capcitor 25 mfd capcity suitable for shadow less LED OT light fittings all as specified and directed

Supply only whirling sling psychrometer for measuring temprature of the room complete all as speicfied and directed.

Supply & fix in replacement ceiling fan 1200mm sweep, 230 Volts AC single phase, 50 Hz 3 blades complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including extra GI/MS pipe down rod, as per site requirement complete all as specified and directed. Note :- Old removing fan will be deposted in MES store yard.

Supply and fixing in replacemet water heater storage type geyser electric driven, single phase of capacity 25 litre 5 star rating complete with fixing arrangement including grouting of nut bolt, washers etc 4 Nos hold fasteners all as specified and directed. Note :- Old removing geyser will be deposted in MES store yard.

S&F,in replacement of U/S 15 mm bore, 900 mm long down rod made of medium grade galvanised iron pipe including drlling of hole, cutting of slot etc.complete all as specified and as directed.

S & F in replacement of U/S Door gasket for 60 kg washing machine installed at Laundry plant of MH Dehradun all as specified and directed by Engr in charge

S & F in replacement of U/S Door gasket for 30 kg washing machine installed at Laundry plant of MH Dehradun all as specified and directed by Engr in charge

S & F in replacement of U/S V belts of following sizes for machines installed at laundry plant of MH DDN as specified and directed by Engr in Charge

S & F in replacement of U/S heavy duty Roller Bearing of following sizes for machines installed at laundry plant of MH DDN as specified and directed by Engr in Charge

22215 CKW for 60 Kg Washing Machine

22212 CKW for 30 Kg Washing Machine

M&L for taking down electric motor from base frame and shifting to work shop for rewinding, dismantling and taking out rotor assembly from stator carefully and cutting/cleaning burnt wire from stator, repair to damage slots including rewinding with super enameled copper wire of suitable size, varnishing, drying and tapping with cotton tapes, reassembling, reinstalling at site including testing at full load complete for the following sizes motor complete all as specified and directed

10 HP Motor

7.5 HP Motor

5 HP Motor

3 HP Motor

2 HP Motor

1 HP Motor

S & F in replacement of U/S Glands for 30 to 60 Kg for washing machine installed at MH Dehradun complete all as specified and directed by Engr in charge

Supply and fix in replacement of 3 Pole power Contactor 22-32 Amp, 1 NO+1NC (MNX25) for 60 Kgs washing machine complete all as specified and directed. Make L&T or equivalent Seimens/BCH.

Supply and fix in replacement of 3 Pole power Contactor 22-32 Amp, 1 NO+1NC (MNX18) for 30 Kgs washing machine of make L&T or equivalent Seimens/BCH.

S & F in replacement of U/S micro computer base PLC for 30/60 Kg washing machineas per site requirement for machines of Laundry plant installed at MH Dehradun complete all as specified and directed. Make :- Humotics cat Part No MW3 or equivalent.

S & F in replacement of U/S micro computer base PLC for calendering machine per site requirement for machines of Laundry plant installed at MH Dehradun all as specified. Make :- Humotics cat Part NoCL4 or equivalent.

S & F in replacement of U/S PLC for drying tumbler machine per site requirement for machines of Laundry plant installed at MH Dehradun complete all as specified and directed. Make :- cat Part No TTC-15 or equivalent.

S & F in replacement of U/S Element of 9 KW for Laundry plant installed at MH Dehradun complete all as specified and directed.

S & F in replacement of U/S Thermostat as per site requirement for Laundry plant installed at MH Dehradun complete all as specified and directed.

S & F in replacement of U/S Nozzle for boiler of capacity 600Kg/Hr installed Laundry plant at MH Dehradun complete all as specified and directed.

S & F in replacement of U/S Steam solonoid valve any size and any capacity as per site requirement for Laundry plant installed at MH Dehradun complete all as specified and directed.

S & F in replacement of U/S Steam Ball valve any size and any capacity as per site requirement for Laundry plant installed at MH Dehradun complete all as specified and directed.

S& F in replacement of U/S hydro base rubber for 30 Kg washing machine installed at laundry plant of MH DDN complete all as specified and directed.

S& F in replacement of U/S hydro base rubber for 60 Kg washing machine installed at laundry plant of MH DDN complete all as specified and directed.

S& F in replacement of U/S hand steam press shoe for steam press bed installed at laundry plant of MH DDN complete all as specified and directed.

S& F in replacement of U/S steam flexible pipe 1 mtr long for drying tumbler of 30 Kg installed at laundry plant of MH DDN complete all as specified and directed.

M&L for refilling of 5 KG ABC type fire extinguisher of 70-90% MAP complete incl decaning of existing material and refilling with fresh powder with cartridge etc complete incl disposal of existing retrieved material as per CPCB norms complete all as specified and directed.

All as per item No 219.00 here in above but 4.5 KG CO2 type complete all as specified and directed.

M&L for spray painting of different sizes connecting pipes, chamber covers, fuel tanks, rolling shutters, gates etc and its related items including writing letters etc at various installations as per colour code with one coat of primer and two coat of synthetic enamelled paint after making the surface and removing existing paint complete all as specified and directed.

Supply, fixing, connecting and testing of Screen display controler of 3 phase 440 Volt, 50 Hz for 250 KVA DG Set as per site requirment complete with OEM inclduing taking down the unserviceable existing items complete all as specified. Make :- cummins

S&F in replacement of U/S water pressure gauge glycerin filled stainless steel body of size 100 mm dial rating 0-14 kg/cm2 complete all as specified & directed. Make : H Guru or equivalent

Supply and fix electric shock treatment chart for installation as per sample complete all as specified and directed.

Supply only Test Kit for PH and residual chlorine for STP installations complete all as specified and directed. Make : Hybrid laboratories/RMCO or equivalent

Supply and fix First aid kit for installations at MH DDN complete all as specified and directed.. Make : Sagar/Milton/Jayco

S&F display board for plants/equipments of size 2000 mm x 1000 mm Flex sheet duly background in blue and matter in white colour fixed on MS frame alongwith necessary fixing arrangements for water supply installation as per sample complete all as specified and directed.

S&F display board for schematic diagram of size 2000 mm x 1000 mm Flex sheet duly background in blue and matter in white colour fixed on MS frame alongwith necessary fixing arrangements for installation as per sample complete all as specified and directed.

Supply and fix pinup display board 3 x 4 feet size with green colour soft cloth premium material as per sample alongwith necessary fixing arrangements for installation as per sample complete all as specified and directed..

ANANYA CONSTRUCTION CO.