PROVN OF PARKING SHED AT OFFICERS MESS AND PROVN OF TOILET NEAR P83 AND P84 BUILDING AND PROVN OF CHAIN LINK FENCING IN CHILDREN PARK NEAR OFFICERS MARRIED ACCN AT 17 FBSU AND ADDN ALTERATION OF EXISTING PERSPEX SHEET ROOF AT HQ BLDG AT MUKKUNNIM

Amount

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, complete all as spd & directed.

Dismantling of plain / corrugated or translucent sheet any type any size etc complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as spd and directed.

Surface excavation in soft soil not exc 30 deep and averaging 15 cm and getting out, all complete all as specified.

Excavating in trenches not exc 1.5 mtr wide and n.exc 1.5 m in depth,for foundaton etc and getting out in soft/ loose soil.complete all as spd & directed.

Excavation in post holes (or similar holes ) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with erath around in layer n.exc 25cm, watering and removing surplus soil to a distance n. exc 50M and making good surfaces in any type of soil.

M&L PCC 1:3:6 Type C2 (using 40mm graded stone Agg) as in foundation filling and mass concrete completet all as specified.

M& L for PCC (1:4:8) type D2 (usinig 40 mm graded aggregate crushed stone aggregate) as in fdn , filling and mass concrete complete all as spd & directed.

M/L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as sub base of floor complete all as specified and directed.

M & L 50 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and fair without using extra cement complete all as specified and directed.

M/L for 75 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate floor finishes complete all as specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed by Engineer-in charge.

M&L TMT bars 8 mm dia and over, as in stirrups cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as spd & directed.

M & L formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as spd.

M & L formwork to sides and soffits of lintels,lintel bend, beams, incl chajja etc finished rough surfaces of concrete complete all as specified.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, under reamed piles and mass concrete all as specified and directed.

M&L RCC type B-1, 1:2:4 (20mm graded agg) as in columns, pillars, piers, posts and struts.complete all as spd & directed.

M&L RCC M-20 Design Mix, using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.

M&L RCC M-20 Design Mix, using 20 mm graded aggregate as in beams, cantilevers, lintels, over 1.5 m span and similar work etc all as specified and directed.

M&L providing precast cement concrete block masonry with solid block type C-1 ,1:3:6 exc 10 cm in width and setting in cement mortar 1:6.complete all as spd & directed.

M&L providing precast cement concrete block masonry with solid block type C-1 ,1:3:6 exc 10 cm in width and setting in cement mortar 1:6.complete all as spd & directed.

M&L providing precast cement concrete solid blocks or slabs 10 cm thick type C-1 ,1:3:6 and setting in cement mortar 1:6.complete all as spd & directed.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm 1:4 all as specified and as directed

M&L for 15 mm thick cement plaster in CM (1:4) on fair faces of brick work or concrete surface surface finished even and smooth (without using extra cement) complete as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:3 as in ceilings complete as specified and directed.

M & L two coats of white wash on newly plastered surfaces of wall including preparation of surface complete all as specified and directed.

M & L applying two coats of white wash on new ceiling surface including preparation of surface. complete all as spd & directed.

M & L applying two coats of cement based paint on old wall surfaces including preparation of surfaces complete all as specified and directed.

M&l for preperation of new surfaces of walls and applying two coats of OBD over a coat of alkali resistant primer complete all as specified. (New colour coding shall be as approved by GE)

M&L for preparation of old treated surfaces of walls and applying two coat of oil bound distemper complete all as specified and directed.

M & L for prepration of old wall surfaces and apply one coat of weather proof coat paint incl necessary scaffolding etc complete all as specified.

M/L two coats of synthetic enemal paint on new steel surfaces of any description, over 10cm in width or girth,not otherwise described incl preparation ,over a coat of redoxide primer of new surfaces all as specified

M & L for prepation of steel surfaces of any description, exc 10cm in width or girth & applying one coat of synthetic enamel paint over a coat of redoxide primer incl preparation complete all as spd and directed.

Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

S & F Glazed ceramic tiles in vertical surface 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over rendering 10mm thick in CM 1:4 on wall to receive wall tiles complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F butt hinges 100 mm long medium weight cld rolled mild steel fixed complete all as spd and directed.

S & F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as spd and directed.

S & F 150 mm long aluminium handles, cast type anodised all as specified and as directed.

S & F 15 MM GI tubing jointing and testing galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in floors complete all as specified and directed

S & F 20 MM GI tubing jointing and testing galvanised iron tube, medium grade with all fitting such as bends, elbow, socket, reduce etc fixed to walls and ceiling or laid in floors complete all as specified and directed

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed

S & F for 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as in repairs after removing existing damaged water tank all as specified and directed

S & F 15mm stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union. complete all as specified and directed

S & F chromioum plated fancy type 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ ppr pipes or brass ferrule complete all as specified and directed

S & F fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron /PPR pipes and fixed complete all as specified and directed

S&F fancy type 15 mm dia angle cock, cast copper alloy screwed for iron pipe & fixed complete all as specified and directed

S&F 15mm bore PVC connection pipe, 450mm long fixed complete all as specified and directed

Supply & fixed vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified

Supply & fixed 10 litre capacity Flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified.

S & F vitreous china WHB white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed.

S & F vitreous china bowl urinal, white, flat back, size of 465x355x 265 mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete.

S&F 20mm dia tabular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets all as spcefied.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good and also cutting, screwing and waste all as specified and directed

S & F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, as in walls, floors or in trenches and their making good and also cutting, screwing and waste all as specified and directed

M&L for PVC(SWR) floor trap 75 mm dia , plain with grating including jointing with solvent cement

S & F PVC (SWR) bend 75 mm dia complete all as specified and directed

S & F PVC (SWR) bend 110 mm dia complete all as specified and directed

S & F PVC (SWR) vent cowl, 75 mm dia cowl complete all as specified and directed

S & F 2 mm thick, coloured fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc including necessary scaffolding in required complete all as specified and directed.

S & F mild steel frame work of angle/ tee/ square tube as in addn rafter/ purlines and replaced of rusted portion, crane gantries rails and fastenings and heavy bracket framing ( beams tee, angle, channel or flat sections) including distance pieces , cleats etc , Fe-290 (Gde E 165) complete all as spd & directed.

S & F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an blue colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed.

S & F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605 X 605 mm and PVC insulation panels 10mm thickness with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made with aluminium complete al a spd & directed

S & F aluminium non power driven airwings turbo air ventilator 600mm dia to be fixed on top of roof covering including necessary cutting of roof sheets fixing in position and necessary arrangements to avoid leak all as directed by Engg in Charge

S&F rolled mild steel Joist, channel, angle, or tee sections, as in posts/gate and similar works etc fixed independently, without connecting plates, etc. (cut including nuts / bolts & necessary cutting, drilling etc Fe 290- W (Gde E-165) complete all as specified and as directed

Supply only PVC coated MS galvanised chain link fencing including line wires, sizes of mesh 50mmx50mm complete all as specified and directed by Engg in Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M & L broken stone or boulders , hard core of gauge n. exc. 63 mm deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled / rammed to a true surfaces complete.

Returning filling including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil complete all as spd & directed

Removing excavated soil n.exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil.complete all as spd & directed

M&L for Point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etc all as specified and directed for the following :-

One light point controlled by one one way switch

One exhaust fan point controlled by one one way switch.

S&F Switch Modular type single pole oneway 5 amps all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body on PVC round block all as specified.

M&L for sub main wiring surface type with 2 runs of 2.5 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth continuity 1100 Volts grade PVC insulated unsheathed single core multistranded cable FRLSH grade with copper conductor confirming to IS 694 drawn in and including provision of suitable dia of PVC rigid conduit (medium grade) with conduit accessories such as bends, elbows, saddles including making good in CM 1:3 and painting with existing colour paint complete all as specified and directed.

Supply and fix new energy efficent LED Box type fitting 1 x 20 watts 4 feet long CRCA body powder coated white batten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete

S & F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply, fixing and connecting up complete MCB DB SPN 4 way double door, 230 V, AC, 50 Hz, for MCB SPN as incomer and MCBs SP as out going, IP-43 protection conforming to IS-13032 universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides complete all as specified and directed. Make : Legrand/ Schneider Electric/ Havells

Supply and fixing miniature circuit breaker (MCB) Single pole and Neutral 5 to 32A rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning.

Supply and fixing miniature circuit breaker (MCB) Single pole 5 to 32A rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm including cutting hole of suitable size on wall all as specified and directed.

Dhanyaconstructions

M/s G.Ramachandran