Service contract for renovation of electrical wiring with supply of materials at KTPS township Mini market under EMOPH dept

RENOVATION OF ELECTRICAL WIRING INCLUDIN

Distribution wiring in 1.1 KV grade 2x22 /0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire in suitable size PVC casing-capping with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]

Distribution Wiring in 1.1 KV grade 2x22 /0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire in suitable size PVC casing-capping with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Piano key type plug socket and switch fixed on PVC switch board with connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (on Board)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing PVC switch board with making connections etc

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch on PVC board embedded in wall incl.

Supplying and fixing of double door Vertical TPN MCBDistribution board for MCCB incomer with IP-42/43protection, on angle iron frame on wall & mending good the damages tooriginal finish incl. Inter connection with suitable size of copper wireand neutral link & provision for earthing attachment.(Make - L&T / Legrand/ABB )4-Way VTPN Double Door DB-MCCB Incomer ( Up to 160 A )

Supplying and fixing of 415 V Four Pole MCCB in existing Vertical DBs including necessary connection as per GS. ( Make - L&T / Legrand/ABB) 100 A FP MCCB (Breaking capacity-25KA/35KA)

Supplying and fixing of 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per GS ( Make - L&T /Legrand/ABB ) 63 A TP MCB.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 4x36/0.3(16.0 SQMM)+2x22/0.3(6.0SQMM).

Supplying and fixing 6-way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supplying and fixing 240/415 V 63A F.P MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Supplying and fixing 240/415 V 6-32A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas.

Supplying & Fixing sheet 6x4 6x4 PVC inspection box.

Supplying & Fixing sheet 4x4 PVC inspection box.

Supplying & Fixing sheet 8x6 PVC inspection box.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping incl. necy. PVC clips, fittings etca)2x22/0.3(1.5 sqmm)+1x22/0.3(.75 sqmm).

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping incl. necy. PVC clips, fittings etca)2x22/0.3(2.5 sqmm)+1x22/0.3(1.5 sqmm)[power plug).

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping incl. necy. PVC clips, fittings etca)2x22/0.3(6.0 sqmm)+1x22/0.3(4.0 sqmm)[SPN DB].

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Supply & Fixing of 15Watt LED Surface Panel Lifgt (Philips/Havells/Surya/Magic).

Finishing the end of cupper PVC wire by crimping method including providing of cupper socket as per direction of EIC.2.5 sq mm copper socket.

Finishing the end of cupper PVC wire by crimping method including providing of cupper socket as per direction of EIC.6.0 sq mm copper socket.

Supply & Fixing 16.0sqmm Cu. Finishing End Termination.

Dismantling of Old damaged wiring materials from entire minimerket area & Return to site store.

Supply and fixing of 2Way/4Way MCB box.

Supply & Fixing 32A DP RCCB,100mA (Anchor/L&T). Additional Data:Supply and fixing of 32 A/40 A DP RCCB 100 mA (Anchor/L&T).

Laying of cable from 3/3½ core 50 sqmm to 95 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 1.1 kv Gr. 3.5 core x 70 sq. mm. PVC armoured Aluminium XLPE cable.

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. 1.1 kv Gr. 3.5 core x 70 sq. mm. PVC armoured Aluminium XLPE cable.

Digital energy meter . Additional Data:Signgle Phase LCD Meter,5/10-30/60 A with Box, Make: L&T Cat no. WM101BC5DL0BOX.

Supply & Fixing 8X10 TW board.

Fixing of Energy Meter.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI- Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.For Roof Top.

Supply and fixing Installation of weather proof PVC Box (size- 150x100x65 mm) with Terminal with all hardware and accesseries.The box fixing arrangement with fusnut.(make- Sintex).For Roof Top.

Supply & Delivery of LED STREET LIGHT # Additional Data:45 WATT LED STREET LIGHT,(BRAND-HAVELLS/MAGIK).

Supply & Laying of 20mm PVC Rigid Pipe.