Construction of New Aganwadi Building at Various Village Taluka-Tilakwada Dist-Narmada Package-03 (2nd Attempt)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

2 serviceable materilas and disposal of unserviceable materials with all lead 29.20 Cum 576.30

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

3 serviceable materilas and disposal of unserviceable materials with all lead 94.80 Sqmt 50.28

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M.

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Earthwork in cuting in all sorts of soil and soft murrum including conveying

and spreading the stuff, embankment as and where directed within

200meters from the end of the cutting with all required lead and lift.

Earthwork for embankment including breaking clods,dressing with all lead

and lift (excluding watering and consolidation)(E) From Borrow area

7 within 3.0 Km. lead Rolling of earthwork in layers with power roller 72.40 Cum 196.49

including filling in depressions which occur during the process.Watering of

earth work as directed.

Excavation for foundation upto 1.5 m depth including sorting out and

8 stacking of useful materials and disposing off the excavated stuff upto 50 150.90 Cum 125.86

Meter lead. (D) Soft rock not requiring Blasting

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

upto 50 Meter lead. (D) Soft rock not requiring Blasting

Filling in foundation and plinth with sand in layers of 20 cm. Thickness

10 including watering ramming and consolidating etc. comp. 39.90 Cum 489.28

Filling foundation and plinth with murrum or selected soil in layer of 20 cm

11 in thickness including ramming watering and consolidating etc. complete 108.30 Cum 304.60

Anti-Termite System: Providing and laying of permanent piping technology

anti-termite treatment before flooring work by installing LLDP (Low linear

density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt

pressure compensation chip every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-

clips and nails.The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per building

layout) & ends of loop pass through a PVC elbow of minimum 32 mm ID at

junction box of wall and floor level, entering into a steel reinforced grooved

flexible pipe of minimum 22 mm ID leading into junction box and the loops

shall terminate in junction boxes & test every junction during injecting

chemicals for termite control treatment.Providing and laying cement

concrete 1:3:6 (1-Cement : 3- coarse sand : 6- machine cut stone aggregates

40 mm nominal size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

machine cut stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, and Mass concrete.

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns up to Plinth

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Ground

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Terrace

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (C) Ground Beam and Plinth

Providing and laying controlled cement concrete M-150 and curing

19 complete including the cost of form work but excluding the cost of 16.50 Cum 4441.13

reinforcement for reinforced concrete work in (C) Plinth Slab

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (C) Beam at Ground Floor

Providing and laying controlled cement concrete M-200 and curing etc.

21 complete including the cost of form work and reinforcement for reinforced 1.20 Cum 6704.05

concrete work in (C) Chhajja at Ground floor

Providing and laying controlled cement concrete M-200 and curing etc.

22 complete including the cost of form work and reinforcement for reinforced 1.23 Cum 9003.20

concrete work in (C) Lintel at Ground floor

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (C) Ground floor Slab

Providing TMT Bar FE 500D reinforcement with fusion bonded Epoxy

coating not less than 175 micron thickness and up to 300 micron to

reinforcement bars as per IS-13620-1993 /ASTM-775M (including testing

of coating at plant and all taxes) for R.C.C. work including bending, binding

and placing in position complete upto floor two level.

Providing TMT Bar FE 500D reinforcement with fusion bonded Epoxy

coating not less than 175 micron thickness and up to 300 micron to

reinforcement bars as per IS-13620-1993 /ASTM-775M (including testing

of coating at plant and all taxes) for R.C.C. work including bending, binding

and placing in position complete. above Floor two Level

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees, flats, with connecting plates

26 0.81 Quintal 9108.48

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter.

Providing and fixing M. S. grills of required pattern to frames of windows

etc. with M. S. flats at required spacings and frame alround having min.

weight of Grill 25kg/sq.m, square or round bars with round headed bolts

and nuts or by screws including priming coat of approved quality and two

coats of enamel paint, as directed by engineer in charge (A) Plain Grill

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing 90cm high Stainless steel railing made from anti

corrosive 304 grade S. S. pipe of 50mm dia. (16 Gauge) as hand rail with S.

S. 304 grade Balusters / Posts of Pipe 50mm dia. (16 Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c including two horizontal S. S. pipes of

16mm dia. (16 Gauge) at equal Distance fixed by 18.75mm dia (16 Gauge) S.

S. pipe with baluster including accessories as per Detailed Drawing as

directed etc. complete.

Brick work using common burnt clay building bricks having crushing

30 strength not less than 35 kg/sq.cm. in foundation and plinth in cement 8.70 Cum 4279.98

mortar 1:6 (1 cement : 6 fine sand) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Ground FLoor)

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Terrace Floor)

Half brick masonry in common brunt clay building bricks having crushing

33 strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in 53.10 Sqm 640.77

super structure. Conventional for Ground floor..

Providing and fixing 150 mm wide, approved quality chicken wire mesh at

junction of brick work and RCC work or two dissimilar surfaces, at all

34 heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before 42.90 Sqm 295.12

applying the plaster, including curing etc. complete

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls / concrete wall for interior plastering and

35 finished even and smooth along with floating coat of neat cement slurry etc. 420.90 Sqm 231.38

comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 1) Plaster at Ground

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls / concrete wall for interior plastering and

36 finished even and smooth along with floting coat of neat cement slurry etc. Sqm 255.84

comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 2) Plaster at Terrace

Providing 10 mm thick smooth cement plaster in single coat for plastering

on ceiling and soffits of stairs and finished even and smooth along with

floating coat of neat cement slurry etc. comp. (i) Cement mortar 1:4 (1

cement: 4 sand). 1) Plaster at Ground Floor

20mm thick double coat sand faced cement gutka plaster on walls upto

height 10 metres above ground level consisting of 12mm thick backing coat

38 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1- 318.90 sq.m 353.98

cement : 1-sand) including 1cm x 1cm grooves etc. complete.

39 Providing throating or plaster drip and moulding to R.C.C. Chhajja.. 35.70 Rmt 44.07

Applying two coats of (white cement based) or (acrylic lappy (putty)) or

equivalent and two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the

40 surface free from mortar dropping and other foreign matter and sand 567.60 sq.m 40.59

papered smooth. for All floor.

Wall painting (three coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

41 including throughly brushing the surface free from mortar droppings and 459.30 sq.m 128.38

other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated ceiling surface to give an even shade

42 including throughly brushing the surface free from mortar droppings and 108.30 sq.m 134.04

other foreign matter and sand papered smooth.

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Finishing wall with Weather proof exterior 100% acrylic emulsion paint

With one coat of primer on wall surface to give an required shape even

43 shade after thoroughly brushing the surface to remove all dirt, and remains 318.90 sq.m 122.14

of loose powdered materials.etc complete for All floor

Providing And filling with good quality cinder(steam coal) as directed by

engineer in charge in sunks in layers of 15 cm thick,including

44 watering,placing ,ramming well etc as directed, for all floor. 1.95 Cum 560.14

Provoding and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

panels, including anodised alluminium butt hinges with necessary screws.

45 (B) Non-decorative type and block board core anodised alluminium butt 20.10 sq.m 1829.74

hinges in flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ alongwith embedded

46 wooden pieces for stiffening & also taking hinges & fintures. The whole FRP 4.80 sq.m 2377.76

frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

47 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm 8.70 sq.m 1583.95

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

48 alluminium frame for ventilation with 5 mm thick frosted glass as details 8.70 Sq.m 1175.56

etc complete for Ventilation

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

50 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 12.30 Sq.m 1592.40

sand) and jointed with white cement slurry

Providing and laying Machine cut, free edges, mirror polished Granite Slab

flooring over 18mm (Average) thick base of cement mortar 1:6 (1-cement :

51 6-coarse sand) laid over and jointed with grey cement slurry mixed with 26.10 Sq.m 2368.24

pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 18mm thick

Providing and laying Machine cut, free edges, mirror polished Granite Slab

18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

52 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement 3.90 Sq.m 2366.27

slury mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

53 coarse sand ) finishing with flush pointing in white cement. 4.20 Sq.m 1207.32

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

55 L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing 6.30 Sqm 1121.80

and polishing etc. complete. (B) 30 mm thick

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and

56 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 11.70 Sqm 1070.50

jointed with white cement slurry

Providing and fixing mirror polished 18 mm thick Granite with full round

edge and polished of approved quality in clading on sill and around the

doors/ windows/ ventilation with 20 mm thick cement plaster CM (1:4)

and fixing with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

Providing and laying 40 mm thick IPS (Indian Patent Stone) flooring in

cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate

of 20 mm nominal size) laid in one layer over prepared base and finished

with a smooth floating coat of neat cement mixed with approved yellow

58 colour pigment of required shade at 0.35 kg/Sq.m to obtain uniform colour 37.65 Sqm 379.96

and finish, including surface preparation, compacting, trowel finishing,

curing and complete as directed by Engineer-in-Charge.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8 mm having with water absorption less than

0.5% and conforming to IS:15622 of approved make in all colours and

shades in for outdoor floors such as footpath, court yard, multi modals

59 location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement: 4 30.60 Sqm 2037.78

coarse sand) in all shapes & patterns including grouting the joints with

white cement mixed with matching pigments etc. complete as per direction

of Engineer-in-Charge.

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

60 using white cement including rounding off junctions and extending them 142.20 Sqm 779.70

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

61 required capacity each with all necessary fittings and connection etc. 6000.00 Litre 3.94

complete on terrace.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

62 metre C/C or shall be concelled as directed including necessary fittings etc. 30.00 Rmt 148.12

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

63 metre C/C or shall be concelled as directed including necessary fittings etc. 24.00 Rmt 91.84

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings make as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

64 metre C/C or shall be concelled as directed including necessary fittings etc. 18.00 Rmt 72.65

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

65 potable water of following dia. nominal bore tube fittings and clamps 30.00 Rmt 447.72

including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

66 potable water of following dia. nominal bore tube fittings and clamps 24.00 Rmt 253.82

including making good the wall, ceiling and floor etc. complete. [C] 25mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

67 potable water of following dia. nominal bore tube fittings and clamps 18.00 Rmt 170.36

including making good the wall, ceiling and floor etc. complete. [A] 15mm.

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

68 with collars and butt ends prepared for collar joints including testing of 30.00 Rmt 678.03

joints complete.(D) 300mm

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having

69 characteristic of quick action & tripping with all advance feature & do not 18.00 Rmt 892.39

incorporate any electronic component. for following Max. rating erected as

directed (iI) 40 Amps. DP Cat-III

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

Provision, Supplying and fixing White vitrious ching W.C. sqatting pan

Orrisa type 580 x 400 size with 100mm P or S trap, 25mm dia. C. P. Brass

flush valve and G. I. inlet connection etc. comp. (A) Vitreous ching long

pattern white or color.

72 Providing and fixing brass screw down stop tap.(A) 15mm dia. 12.00 Each 205.83

Providing and fixing ball cock of approved. quality as directed.(A) Copper

Metal (ii) 50mm dia.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

77 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 3.00 Each 859.41

wooden pluge with C.P. brass screws and washers.

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 20mm dia.

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 20mm dia.

80 Providing and fixing Rubber plug for sink or wash basin. 6.00 Each 17.15

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x 100mm size P or R

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

82 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 3.00 Each 8798.79

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

83 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 3.00 Each 3660.76

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling

brickbats with dry masonry work at top for 45cm. height including covering

84 the top with stone including providing vatas in C.M. 1:3 with finishing 3.00 Each 10460.64

curing etc. complete as directed.

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

85 stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on 6.00 Rmt 2656.06

exposed faces of wall in C.M. (1:4) etc complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic/Wooden box, single mounting

86 base frame covered with textured/metallic/white front plate modules 30.00 Pt 407.03

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

87 on PVC / Metallic/Wooden box, single mounting base frame covered with 6.00 Pt 595.90

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules erected on / in wall /

88 ceiling as per pipe erected with following type of accessories. 3.00 Pt 431.27

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard / mcb db board.

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules erected on / in wall /

89 ceiling as per pipe erected with following type of accessories. 6.00 Pt 614.08

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

90 covered with textured / metallic/white front plate modules erected on / Pt

in wall / ceiling with following type accessories. iii) Cat.: III

Supplying and erecting approved make of tube fitting with One no T-5 tube

24/ 28 W with Electronic ballast with each tube separately THD less than

10 & built in adaptors, GI / PVC housing & mirror optic reflector, suitable to

91 work on 120V - 300V, A.C. supply with connector and adapter if required. 6.00 Ea 480.76

[Make of fitting & tube may be differ& fitting shall be providing with tube].

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

92 canopy erected on existing hook or clamp with earthing [ Make shall be 6.00 Ea 1738.21

approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

93 down rod erected duly painted for fan complete with proper insulation 1.80 Mtr 108.07

without leakage and earthing.

Replacing approved make fan regulator resistance type for Ceiling fan

{credit of D.M. retained by Agency.}

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

95 die cast powder coated and high U.V. & corrosion resistance with diffuser 6.00 Ea 535.30

with company mark/name 160V to 270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Supplying efficacy> 85 lumens/watt

led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iv) 16 to 20 watts

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(b) 2 wire 2.5 sq. mm

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark.

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity

(B) 40 Amp. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

100 appropriate nos. of MCBs.(The DBs should be used of same company of 3.00 Ea 867.59

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having

101 characteristic of quick action & tripping with all advance feature & do not 3.00 Ea 2235.13

incorporate any electronic component. for following Max. rating erected as

(ii) 40Amps. DP. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with

102 constant ohmic value surrounded by highly conductive compound with 3.00 Ea 4591.46

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover.

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover.

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing educational information, learning charts, child-friendly

graphics, alphabet charts, number charts, village scenes, thematic

illustrations, photographs and other approved designs on wall surface

using printed flex material of approved quality and thickness, including

103 providing and fixing P.V.C. border patti around the flex sheet, necessary 24.00 Sq.m 353.50

adhesive material, cutting, alignment, fixing, finishing and all labour,

materials, transportation, tools & tackles and incidental charges complete

as directed by Engineer-in-Charge.

Providing and fixing educational information, learning charts, child-friendly

graphics, alphabet charts, number charts, village scenes, thematic

illustrations, photographs and other approved designs on

exterior/compound wall surfaces using weather-resistant and UV-resistant

digitally printed flex material of approved quality and thickness, including

providing and fixing P.V.C. border patti around the flex sheet, necessary

adhesive material, cutting, alignment, proper fixing, finishing and all labour,

materials, transportation, tools & tackles, scaffolding and incidental charges

complete as directed by Engineer-in-Charge.

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Preparing and making Scribble Wall on wall surfaces using approved green

chalk paint finishing, which is suitable for writing and drawing. Cost include

surface preparation, cleaning and smoothening, application of required

primer or base coat when needed and finally applying the approved green

105 chalk paint for making a smooth, durable and uniform writable surface. The 10.80 Sq.m 505.00

above work will include finishing of border, labour, materials, tools,

scaffolding, transportations, etc., all included as per directions by the

Engineer-in-Charge.

Providing and fixing Fabric Finished Pin-Up Board of approved quality and

size with fabric covered soft board/cork board surface mounted on suitable

backing material and frame, including necessary base fittings, screws,

fixtures, supports and all accessories required for complete installation as

per approved drawing and specifications. The rate shall include all

materials, labour, tools & tackles, transportation and incidental charges

complete as directed by Engineer-in-Charge.

Providing and supplying Educational Abacus of approved quality having

overall width of 0.30 m to 0.45 m with coloured movable beads mounted on

sturdy frame with multiple rods/wires suitable for teaching basic

arithmetic, counting and learning activities for children, manufactured from

child-safe non-toxic material with smooth edges and durable finish,

107 complete with all necessary accessories and fixing arrangements as per 3.00 Sq.m 1212.00

approved design and specifications, including transportation and incidental

charges complete as directed by Engineer-in-Charge.

Providing and fixing Child Height Measuring Scale / Growth Chart of

approved quality having measuring range of approximately 0.30 m to

m or as approved, made from durable printed P.V.C./sunboard or

equivalent market available material with clear graduation markings in

108 centimetres and child-friendly graphics, having smooth finished edges and 3.00 Sq.m 1010.00

complete with necessary fixing arrangements, screws, adhesive and

accessories including all materials, labour, transportation and incidental

charges complete as directed by Engineer-in-Charge."

Providing, supplying, installing, testing and commissioning LED Display

Screen of approved make/brand having minimum 32 inch screen size or as

approved, Full HD (1920 × 1080) resolution, LED display technology with

inbuilt speakers, HDMI and USB connectivity, wall mounting arrangement

109 with necessary brackets, power cable, remote control and all accessories 3.00 Each 36360.00

required for complete installation and proper functioning including

transportation, labour, testing and commissioning complete as directed by

Engineer-in-Charge.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

110 80 psi, mention with 40 psi inline type post carbon filter auto low & high 3.00 Each 8431.48

pressure switches with following size of storage tank & LPH capacity &

erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Thirty Seven Lakh Twenty Seven Thousund Eight Houndred Twenty Four & Sixty Two Paisa Only

(A) Total Tendered Amount Rs. _________________________

(B) Rebate on Tendered Amount (if any) _______% (in Figures) Rs. _________________________

(C) Net Tendered Amount (A – B) Rs. _________________________

Construction of New Aganwadi Building at Various Village, Taluka: Tilakvada, Dist: Narmada. (Pkg-3

Bhadarva, Kopari and Fulvadi Village)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for

work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction

worker's welfare cess Act - 1996 (Labour & Employment Department Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-05,

Notification of Labour & Employment Department Dtd. 03-01-05 and Labour & Employment Department letter No. CWA

6. Credit of dismantled materials of amount of Rs.2500 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 /

61 / S, Dt. 27/11/2008 attached with tender papers.

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011 with

details specifications and details of works and amount involved at site at his own cost as directed by Engineer-in-charge.

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or

Private laboratory approved by Govt. of Gujarat. Bill for testing charges should be paid by Executive Engineer and 1% of

Estimated cost computed after deducting the cost of materials to be supplied by the Govt. and shall be recovered from

the contractor's running bill as per Govt., R&B Department No. TNC-1085/(4)/C Dtd 20-12-91.

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/

Cement Consumption/ 16/ C/ Dt.11-5-2017 as stated in SOR therefore in RCC items where there is a change as per

actual mix design the cost of difference of cement consumption shall be deducted from the rate of original item at the

rate of input rate mentioned in the tender.

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any

contractor representation to reimburse any financial burden due to applicable taxes i.e. GST etc.

Dated Signature of Deputy Executive Engineer

the Contractor. Panchayat (R&B) Sub Division