SPL REPAIRS TO BLDG NO T-14 (PRS BLDG) AT ZONE 1, SPL REPAIRS TO ROAD FROM BLDG NO P-8 TO GATE NO 2 AT LAXMAN MARG AND PROVN OF ADDL CEILING FAN IN JCOS/OR AND OFFRS ACCN AS PER MAP SCALES AT 4 CSR, BELONIA, CHANDPUR UNDER GE (S) TEZPUR

Amount

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.All as specified and as directed by Engineer-in-charge.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work.All as specified and as directed by Engineer-in-charge.

Ditto all as per Ser Itme no 2 above but In fillests, rails , posts, refters and purlins etc under 40 sqcm in section unframed work.All as specified and as directed by Engineer-in-charge.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters.All as specified and as directed by Engineer-in-charge.

Demolition of reed lathing, single or double including battens and plasters or checken wire lathing.All as specified and as directed by Engineer-in-charge.

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing).All as specified and as directed by Engineer-in-charge.

Dismantling Structural steel work includings door, gates, etc and similar works .All as specified and as directed by Engineer-in-charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar All as specified and as directed by Engineer-in-charge.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radiushalf brick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) All as specified and as directed by Engineer-in-charge.

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, eck slab and in shelves and the like all a specified and diredted

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) All as specified and as directed by Engineer-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.All as specified and as directed by Engineer-in-charge.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.All as specified and as directed by Engineer-in-charge.

Taking down chowkhat with shutter/without taking off shutter from the frame n exe 1.50 each.All as specified and as directed by Engineer-in-charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.All as specified and as directed by Engineer-in-charge.

S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws.All as specified and as directed by Engineer-in-charge.

All as per item No.18 above but plain sheet for ridge ,gutter,eaves board etc fixed with self tapping screws as specified.

M&L 2nd class HW in scantling fixed clean swan in framed work.All as specified and as directed by Engineer-in-charge.

M&L 2nd CL HW plain fillets square, rectangular or triangular in section clean sawn sectional area exe 6 sqcm & n exe 13 sqcm fixed with nails.All as specified and as directed by Engineer-in-charge.

S&F Vitrified ceramic tiles 10mm thick (square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

M&L 18 to 20 mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.All as specified and as directed by Engineer-in-charge.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified

S & F Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

S/F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 including pedestal excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

Supply and fix as in repair 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

Supply and fix as in repair bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag.

S&F in repairs 10Ltr capacity PVC valve less syphonic action type flushing cistern low level, with inlet ball valve, float and hand incl ncessary brackets & screws as required complete

S&F in repairs PVC connections 15mm size with PTMT nut of length 600 mm complete all as specified.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix,as in repair, CP 40mm dia waste coupling forstainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

S&F in repairs 15mm dia stop valve fancy type chromium plated with long shank and cup (conealed rype) screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F as in repair, Overhead shower 125 mm dia round shape single flow (ABS Body Chrome plated with Gray face plate) with rubit cleaning syste, including fixing to steel pipe or unioun of 15mm bore all as specified and directed, Make: Jaguar Cat No Eso-542A

S&F as in repair 15mm bore health faucet (ABS body) with 8mm Dia, 1.2 m long flexible tube & wall Hook Model No: ALD-CHR-573 ,Make: Jaquar

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Pillar taps, 15mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Taking up or down 15 mm steel typing and connection, including cleaning for re fixing or removal to strore

M&L for laying 15mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors complete all as specified and directed

Taking up or down 20mm steel tubing and connections including cleaning for re fixing or removal to store.

M&L for laying 20mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors .All as specified and as directed by Engineer-in-charge.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.

S&F 30mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side.All as specified and as directed by Engineer-in-charge.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a) .All as specified and as directed by Engineer-in-charge.

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing.All as specified and as directed by Engineer-in-charge.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each.All as specified and as directed by Engineer-in-charge.

S&F 75mm Butt hinges medium weight cold rolled mild steel

S&F MS 200 mm ordinary rat tail rod pattern spring including roller and roller plate

S&F 150mm long aluminium handle, cast type, anodised

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.

S&F 100mm Butt hinges medium weight cold rolled mild steel

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F 5 mm thick tinted/heat absorbing glass of any size with aluminium bedding and complete all as specified and directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L 15mm thick rendering in CM (1:4) on one side of lathing finishedd even and smooth without using extra cement including 0.71mm chicken wire and size of mesh 12mm.All as specified and as directed by Engineer-in-charge.

M&L 10mm thick rendering in CM (1:6) on other side of lathing finished even and smooth.All as specified and as directed by Engineer-in-charge.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and smooth without using extra cement .All as specified and as directed by Engineer-in-charge.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement .

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

M&L Applying two coats of Oil bound distember to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distember to wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L for complete removal of existing treatment of external walls along with preparation of wall surface using wall care putty and applying two coat of apex/ weather coat water proofing paints over two coats of approved paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L for Newly plastered surfaces of external wall and applying two coats of apex /weather coat paints over two coats of approved Paints damp shield or equivalent over a coat of primer etc complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 110mm bore.

All as per itme No-86 but 75mm bore

S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) pipes 110mm single socketed in any length with rubberring joints laid in trenches or in floors

S&F in repair PVC (SWR) bends any radius 75mm bore.

S&F in repair PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F in repair PVC (SWR) bends any radius 110 mm bore.

S& in repair FPVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

S&F Solid wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed

M&L preparing surfaces at wood & wood based materials new or old at any description & girth not otherwise described & treated with tar or coal tar black paint

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

S&F in repair floor door stopper aluminium alloy body overall length 140 mm and tonge anodised with hard drawn steel spring.complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminious macadam surface exc 50 mm and not exc 100 mm deep including removing to a distance not exc 50 m and stacking all as specified and directed.

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregate of granite trap or balast grading 1 (63 to 40 mm size) spread, rolled and consolidated with 8 to 10 capacity power roller to required gradient and camber complete all as specified and directed.

M&L for preparing unsurfaced water bound macadam surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bitumen primer @ 10 kg/10 Sqm (paving bitumen grade VG-30) complete all as specified and directed.

M&L Premix bituminous, macadam using paving bitumen grade VG-30 any penetration content @ 4% by weight of total mix laid /rolled and compacted to required gradient and camber with 8-10 tonne power roller and rolled to a uniform smooth surface (consolidated avg thickness n.exc 50mm) including preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen grade VG-30) @ 5 kg/ 10 Sqm complete all as specified and directed.

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen grade VG-30) @ 5 kg/ 10 Sqm complete all as specified and directed.

M&L for Bituminous premix semi-dense asphaltic concrete (SDAC) 40 mm consolidated thickness with 5.5% binder content of which (Paving bitument VG 30 @ 92 % and 8 % waste plastic) by wieght of total mix using hotmix plant providing and laying with mechanical paver and compacted with 8 to 10 tonne capacity power roller to required gradient and camber complete all as specified and directed. Note :- Minimum bitumen content shall be 5.5% as specified here in above. Please note that if the actual qty of bitumen to be incorporated on approval of job mix formula is found more than minimum bitumen content specified above. No price adjustment shall be for actual bitumen content of mix design bitumen shall be paving bitumen of Graded VG-30 and shall be procured by the contractor.”

M&L for 1.5 mm thick Road Marking painting to road surfaces as in lines, dashes, arrows, letters, zebra crossing etc on roads, pavements and like with thermoplastic road marking paint with applying glass beads @ 300 gms/Sqm over painted surfaces while the painting surfaces are by hot mechanical means including cleaning surfaces complete all as specified and directed. (Make : Jotun India Pvt Ltd. / Asian Apcomark / STP / Shalimar Paints Ltd / Berger Paints Ltd / Jenson & Nicholson Paints Ltd.)

S & F in repairs of Road Studs two way reflective of 100mm x 100mm x 18.5mm ,ABS Body Reflective Panel of Amber, Red or White provided at site as per manufactuer's instructions complete all as directed (Make : Model No. DA 978 of Dark Eye or equivalent make of 3M/Sinor Infrastructure).

S&F in repair of solar - powered environment friendly,LED based Road stud made of aluminium-aloy shell, 100% waterproof design according to IP 65, dimention of 125mm x 125mm x 25 mm (Shank 60mm), High efficiency Mono-crystalline Solar Panel 2.4V/0.3 watt, One Ni-Mh or NL-cd rechargeable battery (1.2V/1600 MA), Six super bright LEDs with 10,000 to 18,000 mcd (Millicandela), View distance : upto 1000 Meters , Flash rate : 2Hz, Bearable Weight : 10 Tons approx, working time for 3 to 4 days provided at site as per manufacturer's instructions . (Make: Dhruv Model of Dark Eye

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.

M & L for taking down fans ceiling/Exhaust cable ends dismantling blades and removing fan and keeping in safe custody for reuse.

Taking down old U/S LED light fittings any type and size

M & L for point wiring for one light point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC Casing Capping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.115 above but for 5 amps socket on same board with other switches

All as per Ser item No.115 above but for 5 amps socket on independent board.

All as per Ser item No.115 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fix switch 5 amps switch flush type one way single pole.

Supply and fix switch socket combination outlet flush type multi pin 5 amps.

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps

Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminal.

Supply and fix ceiling fan regulator Electronic rotary Step type 80 watt single phase A/C 230 volts all complete as specified and directed

Supply and fix Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC concealed conduit with all fittings and accessories including PVC box (IS-14772) and 1 X 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.

All as per item No-124 but 2x6.0 sqmm+1x4.0sqmm earth wire

S&F PVC angular holder polycarbonate as specified and directed.

M & L for Point wiring for one light point with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and existing non metallic PVC rigid conduit and conduit accessories, medium grade, ISI marking, concealed with provn of modular metal flush box and Modular white Cover Plate with Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/paint/distemper) wherever required(as per the existing condition) all as specified and directed Note -modular metal flush box and Modular white Cover Plate with Frame shall be measured and paid for seperately under relevent item.

All as per item No-127 but for one fan point

All as per item No-127 but for One 3 pin 5 Amp socket outlet on the same board

All as per item No-127 but for One 3 pin 5 Amps socket out let on independent board

All as per item No-127 but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

All as per item No-127 but wiring with 4sqmm including 2.5 sqmm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one15 Amps socket out let on independent board.

All as per item No-127 but for one bell point controlled by one, one 5 amp switch

S&F in repair switch bell push, flush type, 5 Amp all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair bell, AC, 230 V, SP, ding dong type all as directed & specified. Make Anchor/leader/ Bajaj

Supply and fix, mello- music bell moduler type, AC 230 volts single pole complete all as specified and directed. Make :- Havells Cat No. AHLDBW000

S&F modular metal flush box of module 1/3/2 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.

S&F modular metal flush box of module 4 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.

S&F modular metal flush box of module 6/8 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 1 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 2/3flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 4 flush ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame of module 6 ISI marked Havells or equivalent make of Anchor all as specified and directed.

S&F modular white cover plate with frame 8 module ISI marked make - Havells or equivalent make of Anchor all as specified and directed.

S&F in repair modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular socket outlet, 3 pin, 6 Amp, flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular switch, 16 Amp flush type 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

S&F in repair modular socket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Supply and fix, 5 step fan regulator high speed energy saving modular type 2 module complete all as specified and directed. Make :- Havells Cat No. AHORFXW004

Supply and fix, TV sockets 1 module complete all as specified and directed. Make : Havells Cat No. AHOKTOW061

Supply and fix, telephone sockets 1 module complete all as specified and directed. Make ; Havells Cat No. AHOKROW112

Supply and fix, switch with indicator moduler type Master Switch in 1 module 10 Amps complete all as specified and directed. Make ; Havells Cat No. AHOSXIW101

Supply and fixing wall mounting industirial socket incl top plug with suitable straight plug, 380 to 415 volts, TPN, 4 poles (3P+N+E) , 32 Amps, Tempra Pro IP 67 to used as 3 phase industrial load mounting on suitable size of wooden box fixing on suface of wall complete all as specified and directed. Make :- Legrand cat No. 5554 59

Supply and fixing wall mounting industirial socket incl top plug with suitable straight plug, 180 to 250 volts, 2 poles (2P+E) , 20 Amps, Tempra Pro IP 67 to used as single phase industrial load complete all as specified and directed. Make :- Schneider cat No . PKF32W734+ PKE32M723

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 63 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting hinged vertical type having 200 rated copper bus bar with neutral link provision of MCCB as incomer and MCBs outgoing complete mounting with Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed. make- L&T/Havells/C&S/legrand/hager.

Taking down old Unsv MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed

S & F MCB SP 6 to 32 Amp,C series , 230 Volts complete all as specified and directed . Make - L&T/Havells/C&S/legrand/hager.

Supply and fix, MCB SPN 240 volts, 10 KA, 50 Hz of capacity 6-32 Amps 'B' Curve all as specified and directed.

S & F MCB DP 40-63 Amps, C series, 230 Volts complete all as specified and directed. Make - Standard/Havells/C&S

Supply and fixing MCCB ,4 pole, TPN, 415 volts, 63 Amps rated, repturing capacity 16 KA with Microprocessor release complete with connecting accessories and making all electric connection using themble in suitable rated to be used in TPN, DB as incomer all as specified and directed. Make - Legrand / Seimens / L&T,

Supply and fixing in repair of water heater (Geyser) storage type, single phase, energy saving 5 star rated 230 volts grade 25 Ltrs storage capacity complete with fixing accessories.

Supply and fixing single phase ,Kwh meter with LCD display 240 volt , 50 HZs, rating 5 to 30 Amps with optical port + box temper proof digital meter complete with fixing arrangement and making all connection. Make ;- L&T model EM101+class 1 base mounting cat No. WM101BC5DDHBOX

M&L for painting to ceiling / exhaust fan in two coats over one coat of red oxide primer using syenthetic enamel paint after washing with casting soda water ,scarping to old paint, cleaning etc and identy marking by different colour as per exisiting complete all as specified and directed. Note :- Colour of paint shall be approved by Engr-in- charge.

S& F Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook and down road as required length on ceiling, drilliing holes, anchor fastners with nut bolts and washers all as specified and directed. Make- Havells/Crompton/Bajaj/Usha

S&F in repair exhaust fan size of sweep not less than 280 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

S&F in repair exhaust fan size of sweep not less than 230 mm copper wounded winding energy saving single phase, 230 volts, 50 HZs with louver, set of sweep and all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fix in repair , wall mounting fan size of sweep not less than 450 mm heavy duty energy saving single phase, 230 volts, 50 HZs complete all connecting accessories including making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.

Supply and fixing Wall mounting fan 300 mm sweep. Make: Usha/Havells/ Bajaj/Crompton

Taking up earthing.All as specified and as directed by Engineer-in-charge.

Earthing complete with GI earth plate electrode 600 x 600 x 6 mm buried directly in ground vertical to a depth not less then 2.25 mtr below ground level with the top edge of earth plate at a depth of not less then 1.5 mtr below normal ground level using GI earth strip in size 25x4mm connecting to TPN main DB by means of nuts bolts and washers etc. made out of galvanised iron and GI wire connected to main DBs including necessary excavation earth work PCC (1:3:6) type C1 using 20 mm graded stone aggregate earth chamber 40mm thick RCC cover with PCC (1:2:4) type B1 using 20 mm graded stone aggregate 20 mm dia GI medium grade watering pipe and 40 mm for strip, funnel, protection pipe, adequate quantity of common salt, charcoal etc. and connecting up to main DBs complete all as specified and shown in electrical plate No. 3 of MES Sch Part - 1 complete all specified and directed

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. Mirror light fittings LED 09W type Indirected up diwn light for Mirror and as well light applicationas with accessories all as specified and directed. Make: -Make Havells Cat No BS9WLED865SPCWH

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH

S&F in replacement road/ security light/bldg light with high power LED fitting as light source ,energy saving envoirmental friendly 30 W with advance features all as complete with fixing arrangement such as GI pipe brakets bend in 120 degree, clamps made out by GI strip suitable for steel or PCC poles, nuts ,bolts and washer to be fixing incl making all eclectrical connection with three core flexible copper cable etc specified and directed. Make ; Century LED LTD Coad-SPFL030C in equvilent Bajaj /Philips/ Wipro

Supply and fixing in replacemnt of LED decorative garden post top lantern cap 15 watts with opal acryliwith IP 65 protection warm white Cylindrical LED bollard rings contemporary style and unique design toghter for indirect glare- free lighting. including making all connection using 3 core copper flexible cable drawn through in PVC conduit (if required) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of decorative wall mounting of incandescent candle LED lamps 12 W spiral type complete Make - Havells cat No. LHFOFTE1TZ1W012

Supply and fixing in replacement of LED ADORE Lamps 15 W B22 CDL OF 3 STAR Rating including lumen output 1425 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDDEEEML8R015

Supply and fixing in replacement of LED ADORE Lamps 10 W E27 CDL OF 3 STAR Rating including lumen output 950 (lm) of BALL LAMP for cool day light complete. Make - Havells cat No. LHLDEUHEML8R010

Supply and fix, rigid non metallic PVC conduit pipe medium grade, 25 mm dia of bore but inclusive of all tees ,bens ,elbow, reducers, bell mouth tube ends and fixing accessories such as couplers ,lock nuts, saddles, pipe hooks etc for telephone and TV & telephone cable complete all as specified and directed.

Supply and fixing decorative bed light fitting LED candle 40/08W watt home Decor wall mounting elegant diffuser softwhite light very high efficiency long life complete making all connection copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.Make :- Havells cat no.LHJE01106499

Supply and fixing LED wall light 12 watts (GOLD Finish -12W) 6000k very high efficiency enviormental friendly long life mounting on PVC round/square PVC block and making all connection using PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells cat No.LHOECE1TZ1B014

Supply and fixing recessed dust free LED fitting 36 watts soft light glare free homogenous illumination very high efficiency enviormental friendly long life complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :- Havells cat No LEDDRIVER36V36WS

Materials and labour for hanging to ceiling fan as per exsiting and making all electric connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose including fan condensor and other spaires to be minior repair if required complete all as specified and directed

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in hard/dense soil for poles foundation complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and as directed.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed..

M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :- Punned thickness of sand layer shall be measured and paid to contractor.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.

M&L for taking up to LT UG cable in all grade/ core/type/make etc after removing connection complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core .All as specified and as directed by Engineer-in-charge.

M&L for galvanised steel tubing in light grade bore 40 mm with all fitting laid in trenches/ fixed with wall/ pole using fixing accessories all as site complete directed by Engr-in-charge. Make - Tata/ Jindal/ NTL

Supply and fix in replacement of of GI pipe of dia 25mm to wall/Pole of medium grade with required clamping arrangements to fix with the pole complete and connecting to the existing pipe line all as specified Make : JINDAL/TATA

Supply and fix in replacement of of gun metal gate valve of dia 25mm with iron wheel all as specified and directed for the following sizes Make: TATA / JINDAL

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified.

S&F in replacement of 1000 ltrs capacity rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I including dismantling of old tanks. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S Deep-Jeet