Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
27 Jun 2026, 4:00 pm4d left
Similar tender results from the same govt authority in the past 3 years.
The Executive Engineer
O/o The Executive Engineer PWD Electrical Division Thrissur
This work is intended for Setting up of Dialysis Units in Major Hospital Providing Additional EI for the Dialysis Block at Taluk hospital Njarakkal, Ernakulam.Electrification General Electrical Work
2026_PWD_852916_2
PWD/BLDG/1248/2026-2027
Open Tender
Electrical Works
240 days
Njarakal
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
₹50,000
Yes
20 Jun 2026
20 Jun 2026
29 Jun 2026
20 Jun 2026
27 Jun 2026
20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1ELECTRIFICATION | ||||||
| 1.001 | 1.10.3:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.Group C | - | point | - | - | BI01010001010000000000000515BI0100001114 |
| 1.002 | OD321177/2025-2026:Supply, conveyance installation testing and commissioning the light fittings made of CRCA sheet with 0.5mm thickness complete with all accessories and lamps etc. directly on wall using 2Nos flat iron brackets made from 25x6 mm flat iron , painting flat iron bracket , giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. including providing 1200 mm 20 W T8 LED tube , having total efficiency of 100 Lumen /watt with 4 feet Aluminium extrusion in the tube for better heat dissipation,, THD < 20% PF> 0.95 ( LM 79 & LM 80 Certificate from NABL should be submitted ) | - | each | - | - | BI01010001010000000000000515BI0100001115 |
| 1.003 | OD339620/2025-2026:Supply and fixing 1800 lumen round/ square surface mount fitting made of aluminium, housing, and Aluminium heat sink, having efficacy not less than 100l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea | - | each | - | - | BI01010001010000000000000515BI0100001116 |
| 1.004 | OD321167/2025-2026:Supply and fixing 9W LED bulb with minimum 100lumen /watt, pf .95 or above, THD less than 10% | - | each | - | - | BI01010001010000000000000515BI0100001117 |
| 1.005 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. | - | each | - | - | BI01010001010000000000000515BI0100001118 |
| 1.006 | OD321172/2025-2026:
Supply and fixing 10W pressure die cast housing LED Oval shaped bulk head with IP 65 protection acrylic difuser having luminous efficiency not less than 105 lm/w and giving connection with 3 core flex wire as required | - | each | - | - | BI01010001010000000000000515BI0100001119 |
| 1.007 | 90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | - | each | - | - | BI01010001010000000000000515BI0100001120 |
| 1.008 | 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps | - | metre | - | - | BI01010001010000000000000515BI0100001121 |
| 1.009 | 19.1:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required: | - | each | - | - | BI01010001010000000000000515BI0100001122 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.12 MB
Tendernotice_2.pdf
PDF • 0.20 MB
Tendernotice_3.pdf
PDF • 0.18 MB
NIT.pdf
Tender Documents • 0.02 MB
SBD.pdf
Tender Documents • 2.06 MB
BOQ_1448457.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid