Up gradation of Tourist Banglow at Heniskot Kargil.

Amount

DISMANTLING & DEMOLISHING

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : 15.28.1 G.S. Sheet

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead :15.14.1 Of sectional area 40 sqcm. and above.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : 15.13.1 Of area of 3 sqm. and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.15.23.1 For thickness of tiles 10 mm to 25 mm

EARTHWORK

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

SOILING

Dumping of Stone Including Cost of stone

PLAIN CEMENT CONCRETE

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundation,Plinth Beam, footing bases of column.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and assess plate forms.

Edge of slabs.

STONE MASONRY UPTO PLINTH LEVEL

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Labour rate only

RCC WORK

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

REINFORCEMENT

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.)

SOLID BLOCK MASONRY

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 4.10.3 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work.

WALL PLASTER - Exterior

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

WALL PLASTER - Interior

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

EXTERIOR FINISHING

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

INTERIOR FINISHING

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over & including priming coat with water thinnable cement primer

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.93.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Melamine polishing on wood work (one or more coats)

FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work with plank size not Iess than 1200 mm X 190 mm (with tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately, wherever required

FALSE CEILING

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood ( 2"x2"@ 2' spacing)

Providing and fixing 20mm thick wooden planks ceiling (frame work forbase to be paid for separately) with M.S. screws 2nd class kail wood

Providing and fixing false ceilling at all height including P/F of frame work made of special sections, power pressed from M.S sheets and galvinized with zinc coating of 120gms/sqm as per IS:277 and consisting of angle cleats of size 25mm wideX1.6mm thick with flanges of 27mm and 37mm at 1200mmcentre to centre, one flange fixed to the ceilling with dash fastener 12.5mm dia x 40mm long with 6mm dia bolts, other flange of cleats fixed to the angle hangers of 25x10x.5mm of required length with nuts and bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:

DOORS & WINDOWS

Providing and fixing UPVC DGU Sets ( White Shade). All job Complete

Providing wood work in frames of doors, (Double Glazed) windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters(Double Glazed) for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm Second Class Kail Wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

5 mm thick glass pane (weighing not less than 12 kg/sqm) (Double Glazed)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

ROOFING

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete 1st class Budloo wood

Providing High rip coloured sheet roofing 0.50mm thick including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing coloured sheet ridge 1' width plain sheet.

Providing and fixing of coloured sheet valley 3' width plain sheet.

Providing and fixing of Eves boarding 1.5" plank one side plained including edge designed in 2nd class B- wood.

Providing and laying 12mm thick panalling for soffit including cost of Joist and ratt wood complete.

RAILING

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

CLADDING

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface etc., complete. Second class Teak Wood 12 mm thick

MISCELLANEOUS

Providing and installing Ornamental wooden Shingsak. All job Complete

Providing and fixing of wooden stair railing with 2"dia Blasters 2no on each steps and 4"x4" top railing, 4"dia Noval Post of 1st class kashmiri k- wood complete.

Providing and laying of Black granite 20mm above on pantry top,kitchen shelf or vertical suface as per requirment with moudling and granite polish including all materials complete.

SANITARY FITTINGS:

Providing and fixing of white vitreous W.C with CP bolt,CI chair or other things hanging arrangment.with low volume flushing cistern and internal fittings,white solid plastic seat cover with lid including cutting and making good the wall and floors complete fixture and fittings. Indian W.C

English W.C (all in one)

Providing and fixing of white ceremic wash basin with CI/MS brackets including making good the wall ofsize 660x460 including carriage uptosite

Providing and fixing white viterious pedestrial for wash basin completely recessed at back for reception of wast pvc pipe and with all fittings complete.

Providing and fixing Stainless steel Sink

Providing and fixing of PVC prience pipe type -B of different sizes including fitting as per requirment complete .

150mm dia size

100mm dia size

75mm dia size

Providing and fixing of 4" PVC (P-trape,floor trape,door junction,Plain bend and tee) and 3" plain bend complete job.

Providing and fixing of PPR pipe with all fittings and fixture complete

32mm dia

20mm dia

Providing and fixing of Gysers of standard 50ltrs like Venus or Recold,Usha including all fixture and fitting complete.

Providing and fixing of C.P grating on floor traps complete job.

Providing and fixing of C.P fitting of Jaugar,Haindware,Parko brand icluding all fixture complete job.

Angle cock.

Bib cock

Wall mixer3 in one

Sink mixer

Basin mixer

Over Head shower with arm

Coupling

CP nipple different size

Providing and fixing of c.p toilet paper holder of standard make.

Providing and fixing of elipsoidal towel holder including cost of screw complete job.

Providing and fixing of C.P Health Fourcet with connection pipe complete job.

Providing and fixing of PVC waste pipe for sink or wash basin including PVC waste fitting flexible pipe 40mm dia complete.

Providing and fixing of mirror with required thickness shape and size including the shelve of hardened glass fixture(600x450mm) complete.

Providing and fixing in position of mainhole cover and frame of required size and approved quality rectangular shape 600x450mm size mainhole complete.

Supplying and installing of Water storage tank of standard make like Puff water tank in 1000ltr capacity including all fixture complete.

Providing and fixing of heat Tracers to water supply pipe including insulation pipe using 50mm Foam with aluminium glass wool cladding on exposed area complete job.

Construction of Septic tank of (9'x12')x9'deep including cement concrete walls in(1:3:6)nominal mix with buffle wall,base concret flooring/plastering finished and Rcc slab 8" thick including cost of all materials complete job.

Construction of Soakage pit with dry stone masonary as per site requirment with 8" thick Rcc slab including boulders filling in soak pit bottom complete job.

CARRIAGE OF MATERIAL

Carraige of cement / steel for average lead of 75km by mechnical transport.

Carraige of sand/ aggregate for average lead of 75km by mechnical transport.

M/S LAGO CONSTRUCTIONS

M/S MOHD ALI

M/S Shah Nawaz Hussain