Construction, Successful Testing and Commissioning of RCC Pre-Settling Tank 2nd along with washout arrangements/sluice chamber for WSS Ningli Ghat. Under Languishing Programme.

Amount

Earth work in excavation by manual means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge disposal earth to be levelled and neatly dressed . All kinds of soil

Providing and laying stone soling hand packed on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) crushed.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excld. the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc, and removal of form for: Foundations, footings, bases of columns etc., for mass concrete.

Centering and shuttering including strutting, propping etc, and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including straightening propping etc, and removal of form work for: Suspended floors, roofs, landings, balconies and access plate form

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars)

12mm cement plaster of mix: 1 : 3 (1cement : 3 coarse sand)

Providing and incorporating during concreting P.G.I strip water seal 0.63mm nominal thick at construction joint as per proper specification and instruction of Engineer incharge complete job .

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Providing and fixing of 0.60x0.60 Mtr size M.S Man hole cover made out of 6mm thick M.S plate duly fixed in 40x40x6mm angle iron frame including locking arrangements. Complete job

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complte. Riveted and bolted

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing and stair case railing and similar work including applying a priming coat of approved steel primer. M.S tube (medium) 40mm nominal bore

Providing and fixing of M.s nipples for inlet/outlet and wash out pipes flanged on one side of length 0.75 mtr and 6mm thickness incld. all carriages etc complete job. 100mm dia

Providing and fixing of M.s nipples for inlet/outlet and wash out pipes flanged on one side of length 0.75 mtr and 6mm thickness incld. all carriages etc complete job. 150mm dia

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 150mm dia

Providing, fixing and successful testing of following double flanged non rising spindle with hand wheel C.I sluice valve of kirlosker make (heavy duty) of P.N.I 1.6 rating including tail pieces (male and female) R.I cloth nuts and bolts, including all carriages leads and lifts including cost of lead, spun yarn, excavation/re-filling complete job as per instruction of Engineer incharge. 100mm dia

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Cement/Steel from Divisional store for avg. lead 10 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material:Sand for avg. lead 20 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Agg. 40mm for avg. lead 25 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Agg. 20mm for avg. lead 25 kms

Carriage of materials by Mechanical transport from source to actual site of work including loading, unloading and stacking of material: Stone soling for avg. lead 25 kms