Special Repairs to Khadir police station and barrack, Dist. Kutch. (Including Electrical Work (SBD) (6th Attempt)

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

(A) Civil

Demolition and disposal of unserviceable materials with all lead and lift.(i) Rupees Six Hundred Sixteen and

CEMENT concrete. Eighty Five Paisa Only.

Dismentaling tiled of stone floors laid in mortar including stacking of

Rupees Forty Eight and Sixty

2 serviceable materilas and disposal of unserviceable materials with all 762.00 Sqm. 48.63

Three Paisa Only.

lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain waterpipes with fittings

Rupees Seventy Five and Ninety

3 and clamps including stacking thematerials with all lead and lift ( for any 214.00 Rmt. 75.92

Two Paisa Only.

dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. panIndian and

Rupees Four Hundred Ten and

4 European type, flushing tank etc. including stacking the materials with all 7.00 Each. 410.13

Thirteen Paisa Only.

lead and lift.

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material Rupees Nineteen and Sixty Nine

and disposal of unserviceable from site of work with all lead and lift. Paisa Only.

Removing dry or oil bound distemper by a washing and scraping and

Rupees Eleven and Forty Two

6 sand papering the wall surface smooth including necessary repairs to 1085.00 Sqm. 11.42

Paisa Only.

scratches complete.

Excavation for foundation upto 1.5 Mt. depth incluing sorting out and

Rupees Two Hundred Sixty Four

7 stacking of useful materials and disposing of the excavated stuff of any 67.00 Cum. 264.44

and Forty Four Paisa Only.

lead. (C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

Rupees Two Hundred Eighty Four

8 out and stacking of useful materials and disposing off the excavated stuff 56.00 Cum. 284.37

and Thirty Seven Paisa Only.

upto 50 Meter lead.(C) Hard Murrum

Providing and laying cement concrete 1:4:8 (1- Cement : 4-coarse sand :

Rupees Two Thousand Seven

8- hand broken stone aggregates 40 mmnominal size) and curing

9 22.00 Cum. 2742.27 Hundred Forty Two and Twenty

complete excluding cost of formwork in (A) Foundation and Plinth Seven Paisa Only.

Filling available excavated earth (excluding rock) in trenches. plinth,

Rupees One Hundred Thirty Five

10 sides of foundations etc. in layers not exceeding 20 cm. in depth 45.00 Cum. 135.56

and Fifty Six Paisa Only.

consolidating each dispositedlayer by ramming and watering..

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

BRICK WORK using common burnt clay building bricks having crushing

Rupees Four Thousand One

strength not less than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in

11 47.00 Cum. 4172.60 Hundred Seventy Two and Sixty

cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ) Paisa Only.

Providing & laying CRS Steel Fe 500 reinforcement for RCC work

including cutting, bending,binding & placing in position etc. complete for Rupees Eighty and Sixty Five

all floors.CRS Steel Shall be Approved make list of GSPHCL. Paisa Only.

Providing and laying cement concrete 1:2:4 ( 1 cement ; 2 coarse sand; 4 Rupees Three Thousand Seven

13 M/C stone aggregates 40mm nominal size) and curing complete 8.00 Cum. 3703.19 Hundred Three and Nineteen

excluding cost of form work in Foundation and Plinth. Paisa Only.

Polymer Modified Mortar (Pre-Packed):

Providing and Applying single component, high strength, fibre reinforced,

thixotropic cementitious patch repair mortar that achieves compressive

strength minimum of 15 MPa at 1 day and 45 MPa at 28 days and

capable of applying upto 50mm thick in single layer such as Renderoc

SP40 of Fosroc or Master Emaco S 348 or Shalifix FRM 50 of BASF

make or equivalent, to the prepared concrete area for thickness up to

50mm, after applying epoxy resin based bonding coat as per

manufacturer’s specification, before the bonding agent becomes tack Rupees Two Thousand Nine

14 free, initially by hand and finally finishing the same with trowel carefully 33.00 Sqm. 2977.68 Hundred Seventy Seven and

compacting the same around the rebar and finishing to bring it in line with Sixty Eight Paisa Only.

existing concrete surface on the columns, slabs, beam etc. at all heights,

where the thickness of application is less than 50 mm in patches as per

specification . Item rate is inclusive of all material, labour, tools,

temporary supports for structures, plant and machineries, curing etc.

complete and as directed by Engineer-in-charge and/or consultant.

(Payment to be made in Sq.M for thickness upto 50mm of PMM for patch

area repaired)

BRICK WORK using common burnt clay building bricks having crushing

strength not less than 35 Kg./Sq. cm. in cement mortar 1 : 6 ( 1 cement : Rupees Four Thousand Four

15 6 coarse sand ( Conventional Bricks ), Brick with frog only shall be used 8.00 Cum. 4451.53 Hundred Fifty One and Fifty Three

Paisa Only.

at Ground floor

Providing 20mm thick SAND FACED cement plaster on walls above

ground level consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 Rupees Three Hundred Twelve

sand) and 8mm thick finishing coat of C:M 1:1 (1 cement; 1 sand) etc. and Fifty Six Paisa Only.

complete for any height.(Gutka Plaster)

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing 10 mm thick cement PLASTER in single coat on ceilings for

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : Rupees Two Hundred Ten and

sand ) including finishing with a floating coat of neat cement slurry at Five Paisa Only.

GROUND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on brick or

concrete wall for interior plastering and finished even and smooth in C.M. Rupees Two Hundred Nine and

18 1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat 157.00 Sqm. 209.72

Seventy Two Paisa Only.

cement slurry at GROUND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on brick or

concrete wall for interior plastering and finished even and smooth in C.M. Rupees Two Hundred Thirty Eight

19 1:4 ( 1 cement : 4 sand ) including finishing with floating coat of neat 189.00 Sqm. 238.19

and Nineteen Paisa Only.

cement slurry at FIRST FLOOR.

Provinding 10mm thick WATER PROOF cement plaster in single coat on

fair side brick work or concrete wall for interior plasering upto floor to

level and finishing even smooth in cemente mortar 1:3 (1 cement :3 sand) Rupees One Hundred Ninety Two

20 finished with floting coat of neat cemente slurry incl. provinding and 130.00 Sqm. 192.07

and Seven Paisa Only.

mixing water proofing materials in proportion recommended by the

manufacturersfor All Floors

Celling painting (two coats) with plastic emulsion paint on undecorated

wall surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand

papered smooth With Applying two coats of Fine Putty & One coats of Rupees One Hundred Ninety One

21 primer on new wall surface to give an even shade including thoroughly 370.00 Sqm. 191.73

and Seventy Three Paisa Only.

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. paint, primer and putty shall be as per

approved make list of GSPHCL

Wall painting (two coats) with plastic emulsion paint on undecorated wall

surface to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand papered

smooth With Applying two coats of Fine Putty One Coat of Primer on new Rupees One Hundred Eighty One

22 wall surface to give an even shade including thoroughly brushing the 1052.00 Sqm.

and Forty Two Paisa Only.

surface free from mortar dropping and other foreign matter and sand

papered smooth.paint, primer and putty shall be as per approved make

list of GSPHCL

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Finishing wall with Weather proof exterior emulsion paint on wall surface

(Two Coat) over and above applying one coat of primer to give an

required shape even shade after throughly Brushing This surface to

Rupees One Hundred Fifty Three

23 remove all Dirt and remains of loose poweder material etc. complete. 1788.00 Sqm. 153.35

and Thirty Five Paisa Only.

Primer shall be exterior weather coat and Paint shall be Appex Weather

Emulsion Only Paint and primer shall be as per approved make list of

Providing and laying integrated cement based proprietary water proofing

treatment of required thickness over the roof including providing and

applying two coat of Acrylic polymer of approved brand & manufactures

and china mosaic fitting and finally finishing the surface with white

cement slurry and sloping out terrace slabs with following specification

laid to required slope not flotter than 1 : 80 (incl treating the vertical 407.00 Rupees Five Hundred Sixty Five

surface of the perapet wall upto 20cms height above finished level of and Nine Paisa Only.

terracing including finishing, curing, testing etc. comp. Rate is incl. Ten

years performance of guarantee bond to be given on stamp paper. (No

extra shall be paid for increase in thickness for proper slop.

(a) Applying two coats of Acrylic based polymer of approved brand &

manufacture as per recomodation of manufacturer over the R.C.C. Slab

incl. clearing the surface before treatment.

(b) Finishing the surface with China Mosaic pieces laid on 10mm thick

joint less cement mortar of mix 1:3 (1 cement : 3 coarse sand) admixed

with proprietary water proofing compound conforming to IS :2645 and

finally finishing the surface with trowel with neat cement slurry.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test.All above operations

to be done in order and as directed and specified by the engineer - in -

Provinding & laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring by adhesive

including dismentaling of existing flooring and material jointed with color Rupees One Thousand Seven

cement slurry including finised with flush pointing & cleaning the surface Hundred Twenty Four Only

etc.Completed Brand of the tiles shall be as per approved make list of

GSPHCL. Shade & Size of tiles shall be as specified in tender item.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Provinding & laying 24" x 24" in Skirting riser of steps and dado Double

Charge vitrified 8 to 10 mm thick tile over 10 mm thick Cement plaster of

cement mortar 1:3 (1 cement: 3 coarse sand) jointed with color cement Rupees One Thousand Four

26 slurry including finised with flush pointing & cleaning the surface etc. 4.00 Sqm. 1445.20 Hundred Forty Five and Twenty

complete Brand of the tiles shall be as per approved make list of Paisa Only.

GSPHCL. Shade & Size of tiles shall be as specified in tender item.

Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in

Rupees One Thousand Four

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 (

27 192.00 Sqm. 1473.50 Hundred Seventy Three and Fifty

cement : 3 coarse sand ) & jointed with white cement slurry.(300mm x Paisa Only.

Providing & Laying 24" x 24" vitrified 8 mm thick tile flooring over 20mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry Rupees One Thousand Four

28 including finised with flush pointing & cleaning the surface etc.complete 20.00 Sqm. 1453.19 Hundred Fifty Three and Nineteen

Paisa Only.

for antiskid. Brand of the tiles shall be as per approved make list of

GSPHCL. Shade & Size of tiles shall be as specified in tender item.Size

Providing and Laying Mirror Polished (Dimond Polished) Polished Kota

Stone Flooring over 20mm thick base of cement mortar 1 : 6 (1-Cement :

6-Coarse Sand) laid over and jointed with grey cement slurry including Rupees One Thousand One

29 Rubbing and Polishing etc. Complete. (A) 25mm Thick. In Green Colour. 195.00 Sqm. 1102.90 Hundred Two and Ninety Paisa

Rate Are Inclusive of Single Piece & Making 3 Line Groove & Moulding Only.

Of Outer edge as Directed By Engineer In Charge

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Rupees One Thousand Two

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

30 19.00 Sqm. 1231.90 Hundred Thirty One and Ninety

pigment tomatch the shade of slab including rubbing and polishing Paisa Only.

etc. complete

Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -

100mm dia. With jali of following nominal dia. Of self cleansing design Rupees Five Hundred Eight and

with C.I. Screwed down or Hinged grating including the cost of cutting Twenty Nine Paisa Only.

and making good the walls.

Providing and fixing concealed center point to wall ceiling& floor CPVC

(SDR 13.5) PIPE having National SanitationFoundation (NSF) seal for

Rupees Two Hundred Six and

32 potable water of following dia. nominal bore tube fittings and clamps 60.00 Rmt. 206.73

Seventy Three Paisa Only.

including makinggood the wall, ceiling and floor etc. complete. [B] 20 mm

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing and fixing concealed center point to wall ceiling& floor CPVC

(SDR 13.5) PIPE having National SanitationFoundation (NSF) seal for

Rupees Two Hundred Fifty One

33 potable water of following dia. nominal bore tube fittings and clamps 90.00 Rmt. 251.31

and Thirty One Paisa Only.

including makinggood the wall, ceiling and floor etc. complete. [B] 25 mm

Providing and fixing concealed center point to wall ceiling& floor CPVC

(SDR 13.5) PIPE having National SanitationFoundation (NSF) seal for

Rupees Four Hundred Forty Three

34 potable water of following dia. nominal bore tube fittings and clamps 45.00 Rmt. 443.29

and Twenty Nine Paisa Only.

including makinggood the wall, ceiling and floor etc. complete. [B] 40 mm

Providing and fixing concealed center point to wall ceiling& floor CPVC

(SDR 13.5) PIPE having National SanitationFoundation (NSF) seal for

Rupees Six Hundred Fifty Four

35 potable water of following dia. nominal bore tube fittings and clamps 23.00 Rmt. 654.04

and Four Paisa Only.

including makinggood the wall, ceiling and floor etc. complete. [B] 50 mm

Provinding & Fixing to Wall Ceilling and Floor SWR Rain Water Pipe as

Per IS-13592 of 90mm Dia. Complete with Special Flings, Compressor

type Fittings, Wall clips on wooden patty including making good the

ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR Rupees Three Hundred Two and

Fifty Four Paisa Only.

horizontal pipe and vertical pipe and 90mm bend at the end near by

Ground level rate are Inclusive of all Necessary Fittings required for ALL

FLOORS. Including Z Patti

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste

Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Rate inclusive of All

fittings like single or double 'Y' with door, reducer, coupler single 'T' with

Rupees Four Hundred Seventy

37 door bend, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and 26.00 Rmt. 471.36

One and Thirty Six Paisa Only.

minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical

distance including All Labour Charges etc. complete and making good

the Wall, Ceiling and Floor.

Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste

Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All

fittings like single or double 'Y' with door, reducer, coupler single 'T' with

door bend, G.I. Slotted Z patti of 16 Gauge (minimum1.60mm thick) and Rupees Two Hundred Forty Five

minimum 6mm dia. U Clamp with Washer Nut at every 1.50mt. vertical and Seventy Four Paisa Only.

distance including All Labour Charges etc. complete and making good

the Wall, Ceiling and Floor.

Provinding and Fixing in position UPVC / SWR cowel vent to pipe 75 mm Rupees Sixteen and Forty Seven

dia as directed. Paisa Only.

Provinding and Fixing in position UPVC / SWR cowel vent to pipe 110 Rupees Twenty Eight and Sixteen

mm dia as directed. Paisa Only.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin

Finish Kitchen Sink of over all Minimum size 533mm x 457mm x 203mm

deep having bowl Minimum size 470mm x 395mm x 203mm Finishing

with cement mortar 1:3 (1-Cement : 3-Fine Sand) etc. Complete. Rate Rupees Four Thousand Three

including of 32mm dia. C.P. Brass Waste Coupling and 32mm dia. Rigid Hundred Fifty Five Only

PVC Waste Pipe upto N.T. (S.S. Kitchen Sink Shall be of Nirali, Navkar,

Carysil or Krishna make Only) for ALL FLOORS.

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa

waste coupling with Connection 32mm dia waste Pipe etc. Complete.

Rupees Two Thousand One

Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

42 3.00 Nos. 2102.80 Hundred Two and Eighty Paisa

Complet as per Detailed Drawings, Specifications and as per the Only.

Instruction of Engineer In charge. Materials used for the above items

Must be list approved by G.S.P.H.C.L.

Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete &

M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to

Pillar Tap,PVC Bottle Trap with connection 32mm dia. C.P. brassa waste

coupling with Connection 32mm dia waste Pipe up to N.T etc. Complete. Rupees Three Thousand Nine

43 Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 6.00 Nos. 3935.33 Hundred Thirty Five and Thirty

Complet as per Detailed Drawings, Specifications and as per the Three Paisa Only.

Instruction of Engineer In charge. Materials used for the above items

Must be list approved by G.S.P.H.C.L.

Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour

& Necessary Fittings etc. Complet as per Detailed Drawings,

Rupees Nine Hundred Nine and

44 Specifications and as per the Instruction of Engineer In charge. Materials 6.00 Nos. 909.08

Eight Paisa Only.

used for the above items Must be list approved by G.S.P.H.C.L..

Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover &

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil pipe.

Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia,

Rupees Five Thousand Four

165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate

45 3.00 Nos. 5470.90 Hundred Seventy and Ninety

are inclusive of all matreials, Labour & Necessary Fittings etc. Complet Paisa Only.

as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive

of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Rupees One Thousand Three

46 Drawings, Specifications and as per the Instruction of Engineer In 4.00 Nos. 1309.39 Hundred Nine and Thirty Nine

charge. Materials used for the above items Must be list approved by Paisa Only.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complet as per Detailed

Rupees Five Hundred Sixty Five

47 Drawings, Specifications and as per the Instruction of Engineer In 4.00 Nos. 565.61

and Sixty One Paisa Only.

charge. Materials used for the above items Must be list approved by

Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour

& Necessary Fittings etc. Complet as per Detailed Drawings,

Rupees One Thousand Seventy

48 Specifications and as per the Instruction of Engineer In charge. Materials 9.00 Nos. 1078.70

Eight and Seventy Paisa Only.

used for the above items Must be list approved by G.S.P.H.C.L..

Providing & fixing S.S. CLOTH HANGER ( 5 HOOK ) as per per Detail

Rupees Two Hundred Forty Nine

49 drawigs and as directed by Engineer in charge. Rate are inclusive of all 24.00 Nos. 249.85

and Eighty Five Paisa Only.

material, labour, Taxes. Samrat brand as approved..

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

Rupees Eight Hundred Fifty and

50 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 6.00 Nos. 850.90

Ninety Paisa Only.

wooden pluge with C.P.brass screws and washers.

Providing & Fixing Shower with Arm. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Rupees Nine Hundred Thirty One

51 Specifications and as per the Instruction of Engineer In charge. The 5.00 Nos. 931.79

and Seventy Nine Paisa Only.

Model & Make of Shower with Arm Shall be as per the Approved Make

List of GSPHCL.

Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with

Exposed Part & Other Accessories (Sleeve, Lever, Wall Flange) . Rate

are inclusive of all matreials, Labour & Necessary Fittings etc. Complete

Rupees Nine Hundred Forty Two

52 as per Detailed Drawings, Specifications and as per the Instruction of 5.00 Nos. 942.54

and Fifty Four Paisa Only.

Engineer In charge. The Model & Make of Concealed Heavy Stop Cock

Shall be as per the Approved Make List of GSPHCL.approved..

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per Detailed

Rupees Six Hundred Sixty Five

53 Drawings, Specifications and as per the Instruction of Engineer In 16.00 Nos. 665.51

and Fifty One Paisa Only.

charge. The Model & Make of Angle Cock Shall be as per the Approved

Make List of GSPHCL.

Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout

& Wall Flange . Rate are inclusive of all matreials, Labour & Necessary

Rupees One Thousand Three

Fittings etc. Complete as per Detailed Drawings, Specifications and as

54 1.00 Nos. 1330.32 Hundred Thirty and Thirty Two

per the Instruction of Engineer In charge. The Model & Make of Sink Paisa Only.

Cock Shall be as per the Approved Make List of GSPHCL

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as

Rupees Nine Hundred Ninety and

55 per Detailed Drawings, Specifications and as per the Instruction of 14.00 Nos. 990.61

Sixty One Paisa Only.

Engineer In charge. The Model & Make of Bib Tap Shall be as per the

Approved Make List of GSPHCL.

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern

fabricated from M.S. flat,square bars, round bars,c-channel, box pipe as

per detail Drawings. Rate is inclusive of welding with grinding smooth

surface, two coats of Oil paint and one coat of yellow Zinc primer coat of Rupees Seventy Five and Ten

56 approved brand only. Oil paint shall be Luxol Enamel paint of Berger 440.00 Kg. 75.10

Paisa Only.

Paint india limited. or asian paint apcolite premium gloss Enamel of

asian paint or Dulux premium gloss enamel of dulux paint only structural

steel shall be isi mark only

Provinding and Fixing S.W Gully Trap without C.I. grating but brick

Rupees One Thousand One

masonary chamber and water tight CI cover with frame of 300 x 300mm

57 10.00 Nos. 1176.94 Hundred Seventy Six and Ninety

size inside with standard weight (i) Square mouth traps (B) 150 x 100mm Four Paisa Only.

size P or R Type.

Constructing brick masnory chamber for under ground C.I.Inspection

chamber and bends with Brick having crushing strength not less than

Kg/Sq.cm.in cement mortar 1:5,RCC top slab with1:3:6 in cement mortar

1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4

mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal size)

foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth Rupees Four Thousand One

58 with a floating coat of neat cement on walls & bed concrete etc. 5.00 Nos. 4196.85 Hundred Ninety Six and Eighty

complete. Rate are also inclusive of outside plaster 15mm thick in C.M Five Paisa Only.

1:3 from top of chamber and all side upto 45cm deep below ground level

(I) Inside dimensions 500mm x 700 mm and 450mm deep for Single or

multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD

10 ton (Rubber mould Finish) Inner Size 500 x 700mm with all necessary

Extra over items 58 for every additional depth of 0.1M. ofpart thereof

Rupees Two Hundred Sixty Two

59 beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 5.00 Nos. 262.24

and Twenty Four Paisa Only.

700mm size.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Constructing brick masnory chamber for under ground C.I.Inspection

chamber and bends with Brick having crushing strength not less than

Kg/Sq.cm.in cement mortar 1:5,RCC top slab with1:3:6 in cement mortar

1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C. top slab with 1:2:4

mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal size)

foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth Rupees Three Thousand Seven

60 with a floating coat of neat cement on walls & bed concrete etc. 14.00 Nos. 3793.18 Hundred Ninety Three and

complete. Rate are also inclusive of outside plaster 15mm thick in C.M Eighteen Paisa Only.

1:3 from top of chamber and all side upto 45cm deep below ground level

(I) inside dimensions 455mm x 610mm and 450mm deep for Single or

multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD

10 ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary

Extra over items 60 for every additional depth of 0.1M. ofpart thereof

Rupees Two Hundred Thirty Nine

61 beyond 450mm depth for Brick masonry chamber.(ii) for 455mm x 14.00 Nos. 239.99

and Ninety Nine Paisa Only.

610mm size.

Providing & fixing precast R.C.C. Frame with Cover MD 10 Ton (Rubber

Rupees One Thousand Seven

62 Mould Finish) inner Size 600 x 450mm with all Necessary Fittings. 6.00 Nos. 1702.00

Hundred Two Only

Provinding and fixing WELD MESH JALLI of 0.25mm and 0.25mm wide

with necessary screws and nail at joints cracks of brick work R.C.C work Rupees Two Hundred Three and

as per drawing and specification and direction of Engineer incharge. Fifty Paisa Only.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class

SN8 Structured Wall polyethelene Piping systems (Pipe with

online/offline coupler and elastomeric sealing ring) with non-smooth

External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading,

conveyance to the departmental stores etc. complete. (150 mm ID Dia)

Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene

Rupees Three Hundred Ninety Six

64 Piping and fittings with the help of coupler ( on line / off line ) attached 120.00 Rmt. 396.00

with one end of pipes, sliding over the elastomeric sealing rubber ring

placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the continuity

tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes

& fittings from site stacks to the place of laying etc. as per direction of

Engineer- in-charge.

Providing laying (to level or slopes) and jointing reinforcedconcrete Light

duty non-pressure pipes I.S. class NP2 of thefollowing internal diameter Rupees Two Hundred Fifty Four

with collars and butt ends prepared for collar joints including testing of and Sixty Four Paisa Only.

joints complete.(B) 150mm

Painting Two coats (excluding priming coat) on previously painted steel

and other metal surface with enamel paint, brushing, to give an even Rupees Ninety Eight and Ninety

shade including cleaning the surface of all dirt, dust and other foreign Three Paisa Only.

Painting Two coats (excluding priming coat) on previously painted wood

Rupees One Hundred Fourteen

67 and wood based surface with enamel paint, to give an even shade 130.00 Sqm. 114.24

and Twenty Four Paisa Only.

including cleaning the of all dirt, dust and other foreign matter.

Providing and fixing in positon ISI marked Rotational moulded

Polyethylene double layer cylindrical vertical storage tank (IS : 12701 )

water tank size including making inlet and outlet. Overflow and wash out Rupees Three and Ninety One

arrangement with GI connection including using necessary M H for Paisa Only.

connection etc. Complete with closed cover including applying two coats

of oil pianting outside the tank etc complete.

Provinding and fixing gun metal check or non return full way WHEEL / Rupees Four Hundred Sixteen

HANDLE VALVE 25 mm dia. and Forty Seven Paisa Only.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Provinding and fixing gun metal check or non return full way WHEEL / Rupees Six Hundred Fifty Six and

HANDLE VALVE 40 mm dia. Eighty Six Paisa Only.

Provinding and fixing gun metal check or non return full way WHEEL / Rupees Two Thousand Three

71 HANDLE VALVE 50 mm dia. 3.00 Nos. 2302.33 Hundred Two and Thirty Three

Paisa Only.

Total Amount =

Total Amount =

(B) Electrical

72A Providing and erecting Point wiring with approved 1.1 KV Grade ISI mark 2 X 45 Point 382.00 Rupees Three Hundred Eighty

1.5 sq.mm. copper FRLS PVC insulated wire with 1.5 mm2 copper FRLS PVC Two Only

insulated wire for earth continuity in 25/32 white approved make press fit casing

capping with double locking arrangement with grooves, trunking of size not

below 10/12 mm in height IS:14927 ISI Part –II and with approved make white

accessories like inside and outside coupler, elbow, tee, junction boxes etc. Also

not below 1.8 mm thick duly sealed at joinst and 6 A. Modular type switch /

bell push & accessories and earth continuity of following type, erected on

PVC / Acrylic box, single mounting base frame covered with textured / metallic

/ white front plate modules erected / flushed on wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector (make &

model approved by EIC and matching colur with switches accessories) as

directed. For Open wiring. For Light point. Cat-II

[Length of point wiring must not increase than 10 mtr. For that necessary switch

board and their location must be finalised before execution by agency

otherwise payment will not be done for extra long point. For future extention, if

required, agency has to erect one higher size box as per instruction of EIC &

Wire must be having box packing].

72B For Bell Point, Cat.-II 1 Point 382.00 Rupees Three Hundred Eighty

72C For Fan Point Cat.-II 12 Point 568.00 Rupees Five Hundred Sixty Eight

72D For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 15 Point 410.00 Rupees Four Hundred Ten Only

mark) Cat.-II

72E For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both having 28 Point 234.00 Rupees Two Hundred Thirty Four

ISI mark) Cat.-II. Only

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

73A Providing & erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 17 Point 340.00 Rupees Three Hundred Fourty

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC Only

insulated FRLS wire for earth continuity in PVC Rigid Pipe in Existing Pipe

erected flushed on wall/ceiling complete with approved make 5/6 Amp. ISI

make Modular type switch and accessories mounted in 20 G. G.I. company

fabricated box covered with appropriate front plate modules erected flushed

with wall / ceiling with necessary Modular type lamp holder / Modular type

ceiling rose / HD Connector as directed for concealed wiring.(Deep Junction

box 75mm depth if required)(Make & Model approved by EIC and matching

colour with switch and accessories) Light point. Cat.-II.

Necessary sheet / tape / polythene / sand must be erected or filled in all box to

prevent mortar going into the box. Length of point wiring must not increase than

10 mtr. For that necessary switch boards and their locations must be finalised

before execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size

metal box and plate as per instruction of EIC. Cost of blank plate shall be paid

as per tender item) [This item include cleaning (inside/outside) of all G.I. switch

boards, electric point box, fan box, MCBDB & box cutting plaster finishing for

plate without any gap] (Conductor resistance should be as per IS:8130/1984)

73B For Fan Point (with 6 A. Modular type switch and two module hum free EME 12 Point 502.00 Rupees Five Hundred Two Only

Five step type Electronic fan regulator both having ISI mark) Cat.-II

73C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 3 Point 369.00 Rupees Three Hundred Sixty Nine

mark) Cat.-II Only

73D For Looped on switch board (with 6 Amp.Switch & 3/5 pin socket both having 11 Point 234.00 Rupees Two Hundred Thirty Four

ISI mark) Cat.-II. Only

74A Providing and erecting Medium Class FIA approved and ISI mark white colour 300 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & clamps

on / in wall / ceiling along with continuous fish wire to draw mains with

necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

74B 25 mm dia. 130 Mtr. 33.00 Rupees Thirty Three Only

75A Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having 50 Mtr. 31.00 Rupees Thirty One Only

double-locking arrangement with grooves, trunking of size not below 12.5 mm

in height as per IS with accessories of PVC/Resin polypropylene not below

mm thick duly sealed in joint & erected on wall / ceiling of following size. (a)

mm [make and model approved by EIC as per specification only]

75B 32 mm dia. [make and model approved by EIC as per specification only] 50 Mtr. 36.00 Rupees Thirty Six Only

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

76A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 250 Mtr. 56.00 Rupees Fifty Six Only

grade in 25/32 white approved make press fit casing capping with double

locking arrangement with grooves, trunking of size not below 10/12 mm in

height IS : 14927 ISI Part –II and with approved make white accessories like

inside and outside coupler, elbow, tee, junction boxes etc. Also not below

mm thick duly sealed at joinst with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. [Wire must be having box

packing] (Conductor resistance should be as per IS:8130/1984)

76B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. 200 Mtr. 82.00 Rupees Eighty Two Only

FRLS copper multi stranded conductor for earthing as per standard colour

code. (Conductor resistance should be as per IS:8130/1984)

76C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 60 Mtr. 135.00 Rupees One Hundred Thirty Five

FRLS copper multi stranded conductor for earthing as per standard colour Only

code. (Conductor resistance should be as per IS:8130/1984)

77A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 200 Mtr. 46.00 Rupees Fourty Six Only

grade with Rigid Pvc Pipe In Existing Pipe erected flushed on wall/ceiling

complete with PVC fitting fixed to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with FRLS

PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm.

FRLS copper multi stranded conductor for earthing as per standard colour

code. (Conductor resistance should be as per IS:8130/1984)

77B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. 150 Mtr. 62.00 Rupees Sixty Two Only

FRLS copper multi stranded conductor for earthing as per standard colour

code. (Conductor resistance should be as per IS:8130/1984)

77C 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. 100 Mtr. 120.00 Rupees One Hundred Twenty

FRLS copper multi stranded conductor for earthing as per standard colour Only

code. (Conductor resistance should be as per IS:8130/1984)

78 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe 60 Mtr. 30.95 Rupees Thirty and Paisa Ninety

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of Five Only

following sizes.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

79 Providing and erecting Plug Point wiring with approved ISI make 2 x 2.5 7 Point 588.00 Rupees Five Hundred Eighty Eight

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC Only

insulated FRLS wire for earth continuity in 25/32 white approved make press fit

casing capping with double locking arrangement with grooves, trunking of size

not below 10/12 mm in height IS:14927 ISI Part –II and with approved make

white accessories like inside and outside coupler, elbow, tee, junction boxes

etc. Also not below 1.8 mm thick duly sealed at joinst with FRLS PVC insulated

wire for earth continuit with 16 Amp. ISI marked flush type modular indicator

switch, Socket and accessories erected on PVC / Acrylic box, single

mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. For open wiring [a] 16 Amp.

indicator switch & 1 No. 6/16 A. universal socket combined white colour

suitable for 3 pin top duly. Cat.-II

80 Providing and erecting Plug Point wiring with approved ISI make 2 x 4.0 1 Point 746.00 Rupees Seven Hundred Fourty

sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC Six Only

insulated FRLS wire for earth continuity in 25/32 white approved make press

fit casing capping with double locking arrangement with grooves, trunking

of size not below 10/12 mm in height IS:14927 ISI Part –II and with approved

make white accessories like inside and outside coupler, elbow, tee, junction

boxes etc. Also not below 1.8 mm thick duly sealed at joint with FRLS PVC

insulated wire for earth continuity with 16 Amp. ISI marked flush type

modular indicator switch, Socket and accessories erected on PVC / Acrylic

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. For open wiring one

no. single pole 16 Amp. indicator switch & 1 No. 6/16 A universal socket

combined with white colour indicator & Fuse suitable for 3 pin top duly.

(Approved ISI make & model) Cat.-II

81 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked 5 Point 499.00 Rupees Four Hundred Ninety Nine

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour PVC Rigid Pipe in Existing Pipe erected in

wall/slab along with continuous G. I. fish wire to draw wires and 16 Amp

Modular type Swich and accessories mounted in 20 G. GI company fabricated

metallic box covered with appropriate front plate modules erected flushed with

wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal socket white

colour suitable for 3/5 pin top duly both having ISI mark. (Necessary sheet

/ tape / polythene / sand must be erected or filled in all box To Prevent Mortor

Going In To The Box) Cat.-II. (Conductor resistance should be as per

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

82 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore 3 Each 7025.00 Rupees Seven Thousand Twenty

of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Five Only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark

of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark

reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and gave rectangular

shape so its work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron any where.

SS Nut bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at

terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

Necessary test depth

reportand Cover

must should be heavy duty cast iron with required

be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only]

[OEM has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to

maintain earthing & its value for one year. Earthing must be done in the

presence of A.E. (GSPHCL)]

83 For above earthing additional charges for boring in hard rock soil (by breaker) 3 Each 276.00 Rupees Two Hundred Seventy Six

& filling soft soil in earth pit (certificate for soil have to given by DEE / AE along Only

with photographs)

84 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red 20 sq inch 5.94 Rupees Five and Paisa Ninety

oxide be concealed in wall with necessary plastering & finishing with 3 mm thick Four Only

laminated sheet with grooving as directed of following depth 3" depth.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

85 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED 32 Each 370.00 Rupees Three Hundred Seventy

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat

shall be made from Aluminum extrusion having enough strength (sample must

approved by EIC) with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD : Max. 15%

(G)Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M)Surge protection : Min. 2KV

(N) IP rating: IP

(O)IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q)Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has

submit 4 yrs free replacement Guarantee for complete Fixture) [Approval will be

86 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 4 Each 751.00 Rupees Seven Hundred Fifty One

Cool/Warm white Color LED Down lighter office Lighting Luminaire with Only

separate potted driver with single piece pressure die cast aluminium alloy

housing with corrosion resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED complete (only from

Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, with

W. The LED's should be mounted on Back Lit metal core PCB for better heat

conduction and long life of LED. The Fixture should comply all International

Standarad third party (LM 79 for complete fixture, LM80 for individual LED).

The Fixture have protection like miswiring, over voltage, over load, wrong

wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 90 lm/w & driver efficiency > 85%.

For 24 W fixture wide voltage range from 160 V to 270 V, 50/60 HZ @ 240V

application, 2 KV surge protection.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

The fixure must have min. 2160 lumen light output. The fixture should be

provided with external separate Potted driver, latest Valid BIS approved

Luminaire and driver. The Fixture efficiency ≥ 90 lumens/watt only for safety

and performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily

mount on POP / Grid false ceiling. The Luminiare should be tested as per IP

and following test reports should be submitted at the time of approval: heat

resistant test, thermal test, Ingress protection test, drop test, Photobiological

report with 3 core X 1.0 Sq.mm. flexible wire as per site requirment [Note:-The

manufacturer / authorized Channel partner of the manufacturer has to submit

yrs. free replcement Guarantee for complete Fixture]

87 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 27 Each 111.00 Rupees One Hundred Eleven

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge Only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

88 Providing and erecting Polycarbonet body surface mounting LED Bulk head 2 Each 780.00 Rupees Seven Hundred Eighty

type 9 watt Lighting Fitting with electronic driver having THD < 15%, CRI>80, Only

P.F.0.95 And lumen output from luminaire 720 lm, input voltage range 90-300 V

AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having efficiency

>=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with Beam

Angle 120 deg.

89 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 24 Each 1929.00 Rupees One Thousand Nine

to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Hundred Twenty Nine Only

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9,

(4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service

value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium,

(10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: min

MFD (15% Tolerance )as per is 1709-1984, Aluminium body premium quality,

Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site

requirment, (17) No vibration and noise due to mechanical parts. (Agency has

to erect safey wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at ERDA) (Necessary

test reports should be submitted strictly at the time of approval. Sample

approved by EIC subject to above specification only)

90 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & 24 Each 98.00 Rupees Ninety Eight Only

Nuts erected with necessary hook of 10 mm M.S. Round Bar.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

91 Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt 1 Each 170.00 Rupees One Hundred Seventy

complete erected on existing polished wooden block or in M.S. box with 3mm Only

thick white ISI mark laminated sheet. [Anchor (Chime model), vision, rider

92 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe 15 Mtr. 107.00 Rupees One Hundred Seven

down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 Only

core flexible Core with earthing. [The down rod thikness, hole, locking

arrangement, construction, poweder coating, colour shed should be same as

original down rod brought with ceiling fan. For that agency has to give original

down rod sample to fabricator and one sample down rod should be approved

with EIC. After approval given by EIC, agency can use the down rod as per

approved sample. If without approval down rod will be erected on site, agency

has to replace them with own cost.]

93 Supplying & erecting approved make low noise Decorative exhaust fan 3 Each 1687.00 Rupees One Thousand Six

having size 150/200 mm with 1350 RPM with round / square frame Hundred Eighty Seven Only

ABS/metalic body with Grill / inbuilt lowers.(Make & model approved by EIC)

94 Supplying and fixing radium sticker or Painting the number and words for 50 Each 2.00 Rupees Two Only

inventory Identification on erected fittings / equipment’s or Such accessories

(MCBDB, Panel, Pole, Rack, Earthing, Pump, Door etc.) as may required with

good quality of enamelled paint or fade proof, weather proof, waterproof high

quality vinyl radium sticker for indoor / outdoor application as directed by

engineer in charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by EIC as per

site requirement)

95 Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 1 Rn.Mtr. 4378.00 Rupees Four Thousand Three

G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and Hundred Seventy Eight Only

necessary busbar supports with COPPER busbar having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase & neutral each

suitable for following current capacity with necessary painting mounted on wall

or pedestal frame of required size with necessary connections..(A) Suitable for

63/ 100 Amp. Capacity

96 Providing & erecting 240 V MCB Double pole switch for M&I load (C curve) 6 Each 327.00 Rupees Three Hundred Twenty

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box Seven Only

having following capacity. For 40 Amp.

97 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 1 Each 730.00 Rupees Seven Hundred Thirty

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Only

having following capacity [c] 63 Amp.

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

98A Supplying & fixing box for housing RCCB + MCB combination made of 18 6 Each 272.00 Rupees Two Hundred Seventy

SWG sheet steel duly powder coated with gasket, dust & vermin proof bakelite Two Only

shield two earthing terminals for following type of RCCB, RCCB + MCB [a] For

2 pole [Same company metal box used as MCB / ELCB used with earthing

terminal with necessary Numbering / marking with oil Paint by painter]

98B For 4 pole [Same company metal box used as MCB / ELCB used with 1 Each 442.00 Rupees Four Hundred Fourty Two

earthing terminal with necessary Numbering / marking with oil Paint by Only

99 Supplying and erecting KITKAT pattern porcelain cutout with base of 1 Each 416.00 Rupees Four Hundred Sixteen

following current capacity erected on existing block board. [vi] 200 A. 500 V. Only

100 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 5 Each 111.00 Rupees One Hundred Eleven

25 Amp. suitable to operate on 240 V A.C. system and having breaking Only

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with

101 Providing ad erecting approved make single phase Double Door metal clad 2 Each 4906.00 Rupees Four Thousand Nine

D.B. as per relevant indian standards ammended upto date. Hundred Six Only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after

apply seven tank chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing

link with isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 12 Way

MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

102 Providing ad erecting approved make single phase Double Door metal clad 1 Each 5536.00 Rupees Five Thousand Five

D.B. as per relevant indian standards ammended upto date. Hundred Thirty Six Only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after

apply seven tank chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing

link with isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal blocks

and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way

103 MCBDB: Including

Supplying 1 no.

& erecting

mm Amp. 30 mA

thick double sheet

backelite pole ELCB (ELCB confirming

of approved make and 3 Sq. Mtr. 2289.00 Rupees Two Thousand Two

grade on existing 25 x 25 x 3 mm red oxide painted angle iron frame suitable Hundred Eighty Nine Only

for fixing ICDP SWITCH and energy meter (contractor shall make approved

drawing of Bakelite sheet To arrange required No. of Energy meter &

ICDP/MCB switch-busbar etc. as per Actual space available in electrical room

104 Providing, erecting, Fabricating the M.S. structure as per requirement of site 50 Kg. 75.10 Rupees Seventy Five and Paisa

as per structure design Including proper size approved by EIC of M.S. angles, Ten Only

flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make)

complete with cutting, welding, grinding and finishing duly painted with

Asian/Nerolac make premium quality oil paint and true care red oxide metal

primer,asian paint make with erection on site as per direction of engineer in

charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding.

Payment will be done on KG as per Actual weight.

105 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE 2 Each 69.00 Rupees Sixty Nine Only

installation to be erected as per I.S.

106 Supplying and laying UPVC cable trunking system comprising unplasticised 20 Mtr. 275.00 Rupees Two Hundred Seventy

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS Five Only

.All necessary accessories and measuring of following sizes. [1] 75 mm x

mm trunking. [MK, LEGRAND, OBO make Only]

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

107 Supplying and erecting Fabricating terminal box for street light pole made 7 Each 702.00 Rupees Seven Hundred Two

from 16 SWG M.S. sheet having following size complete with fixing Only

arrangement for terminal board, with necessary hole for wire entry and exit from

the box. The box shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps fabricated from 25mm x

6mm flat.The box shall be painted with one coat of red oxide and two coats of

paint having following box size 330 mm x 260 mm x 140 mm (depth). Providing

and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts,

washers and clamps of size 25 mm x 3 mm suitable for pole painted with one

coat of red lead paint.

108 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm 6 Each 487.00 Rupees Four Hundred Eighty

outside diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and Seven Only

required size and length suitable for 76.5 / 80 mm. required size of pole top or

pipe in pipe surface for terrace as per instruction of EIC or wall bracket as per

instruction of EIC having nuts and bolts for fixing the brackets and having

spread of Upto 0.50 mtr. length with suitable rise as per site condition and

suitable welded stiffner reducer and nipple with check nut complete painted

with one coat of yellow zinc and two coats of alluminium paint for Single arm

bracket suitable for pole or terrace as per design given by EIC (a) For single

arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test

certificate to be submitted)

109 SITC of Outdoor aesthetically designed LED Street Light Luminaire 6 Each 3512.00 Rupees Three Thousand Five

with total consumption of Max. 45 W with single piece die cast aluminium Hundred Twelve Only

housing, high power LED shall be mounted on high quality metal core

PCB with extremely precison designed heat sink complete with IP66

protection Class with polycarbonate / thoughened glass cover the fixture

should be suitable for pole/bracket mounting. The fixture to comply both

LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The Watt Capacity of

Each LED Must be >=4watt in street/flood Light Fitting .The Fixture

Should be able to be Pole Mounted and also bracket mounted, provided

with high quality driver for protection against high and low Voltage cut

Off, opertional for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the Fixture should

meet the following technical criterias Oprating range Voltage 160 to

V, system efficiency >= 110 lm/w, and total lumens not less then

CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

The Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the

fault is removed. In addition to the above product should be operational in

the temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5yrs free replcement Guarantee for complete

110 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper 95 Mtr. 269.00 Rupees Two Hundred Sixty Nine

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with Only

suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor..For 4 core x 2.5 sq.mm.

111 Providing & laying HDPE Double walled corrugated pipes (DWC) 15 Mtr. 117.00 Rupees One Hundred Seventeen

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of 450N Only

capacity with anti rodent and ultra violet material properties with necessary

connecting accessories of same material at required depth to be laid 90 cms.

under ground for laying of cable below ground / road surface for enclosing

cable and back filling the same to make ground as per original. (A) For Outer

dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

112 Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & 20 Mtr. 171.00 Rupees One Hundred Seventy

erecting as directed by Engineer-in-charge. For 25 mm dia. One Only

113 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade 20 Mtr. 46.00 Rupees Fourty Six Only

ISI marked copper wires of following size to be erected as directed. 3 core x

1.5 sq.mm. PVC insulated round copper wire ISI mark.

114 Providing & fixing double compressed heavy duty flange type brass cable 12 Each 43.00 Rupees Fourty Three Only

gland with rubber ring for P V C insulated armoured cable complete with

outgoing tails, insulating tape etc. For following size cables. For 2 to 4 core x

2.5/4.0 Sq. mm (Sigma, MCI, Comet Make Only)

115 Providing & Erecting Univesal Astro interlligent Street light Control Syatem insu 1 Each 12895.00 Rupees Twelve Thousand Eight

with weather proof box for indoor allplication 5KVA ( as Per atteched Hundred Ninety Five Only

Specification)

116 Providing & fixing Solderless crimping type Copper lugs conforming to IS 600 Each 8.00 Rupees Eight Only

suitable for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner. [a] 1.5/2.5 to 6 Sq.mm

117 Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi 30 Mtr. 141.00 Rupees One Hundred Fourty One

stranded, annealed copper conductor with heat resistant PVC insulated Only

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. For

One wire 16 sq. mm

Total Amount =

Total Amount =

Description of Item Unit Total Amount Rs.

Description of Item Unit Total Amount Rs.

No Quantity Rate Rs. in words

Total Amount(A+B) =

Total Amount(A+B) =

I/c Ex. Engineer

Signature of the contractor. G.S.P.H.C.Ltd. Rajkot