SITC of 13 passengers lift along with AMC & Operation of lift to TTD Kalyanamandapam at bhimavaram in West Godavari district. (Part:A- SITC of Lift & Part:B- AMC of Lift).

Part-A (SITC of Lift )

SITC of 13 Passenger lift with the following specification of (The Technical Specification of work attached in BOQ tender documentI) PRODUCT DETAILS II) MACHINE AND CONTROLLER DETAILS III) CABIN DETAILS IV) SAFETY DETAILS V) ADDITIONAL FEATURES

Technical Specification:

I PRODUCT DETAILS

Building Type:Marriage Hall

Lift Type:Passenger Lift

Rated Capacity Persons / Kgs / Class of Loading: 13 Persons / 884 Kgs / P - Passengers

Rated Speed :1.25 m/s

Number of stops / openings:3/3

Floor Designation : GROUND + 2 UPPER FLOORS

Access Sides Inline/Thru Type : 1 (One), In Front Only

Floor Display Character (Entrance Position) : 0(F),1(F),2(F)

II MACHINE AND CONTROLLER DETAILS

Machine Location / Type: Machine Roomless - Gearless

Drive System: Micro Processor Based VVVF

Control system: Microprocessor Based Simplex Selective Collective Control With / Without Attendent

Main Power Supply: AC 3 Phase, 50 Cycles, 415 Volts ±10%

Light Power Supply: 220 Volts 50Hz LNE

III CABIN DETAILS

Car Width mm X Car Depth mm: 1500 X 1450

Car Clear Height mm: 2200

Car Door Type Center/Side: Power Operated Centre Opening Sliding Door

Type of Door Drive: Linear Door Drive System

Car Door (W X H) mm: 900 X 2000

Design Of Lift Cabin*: Stainless Steel (1.5 Mm)

Lift Cabin Finish*:Hairline Finish

Car Door*: Glass - Ss Enveloped (1.5 Mm) Non Fire Rated

Ceiling Finish*:Ss Hairline Finish

Ceiling Type:Sleek Small Circular-JLFC 03 / equilent

Ceiling Light:Led Lights-03

Fan:Regular (Circular) - Fan

Flooring Type:Pvc

Handrail Type:Ss Round Handrail JLHR01 / equilent

Handrail Location:Rear Side

Car Door Sill:Aluminum

Landing Door Finish*: 1-3-Glass - Ss Enveloped (1.5 Mm) - Hairline Finish Non Fire Rated

Landing Door Frame / Finish*: 1-3-Stainless Steel (1.5 Mm) - Hairline Finish

A) CABIN OPERATING PANEL

Number of Car Operating Panel:1

COP Faceplate Finish:Stainless Steel - Hairline Finish

Button Model: 1s4 - Bas128 (Round)

Car Display: Orange Square Dot-Matrix Scrolling Display-Vertical

Car Display Location: Car Operating Panel

Call Register Signal: Yes

Floor Annunciator: Yes

Landing Operating Panel Type:Landing Operating Panel

LOP Location: Landing Display On Wall

LOP Mounting Type: Grouting

LOP Faceplate Material: Stainless Steel - Hairline Finish

Landing Display: 1-3-OSDM-V

Landing Display Location: 1-3-LOP

Call Register Signal:Yes

Stainless Steel Braille Button:Yes

IV SAFETY DETAILS

Over Speed Governor:Yes

Door Protection:Infra Red Door Screen

Counterweight Screen:Inbuilt

Over Load Indicator:Yes

Fireman Switch:Yes

Automatic Rescue Device:Yes

Battery Operated Emg Alarm Light:Yes

Two Way Intercom with Press & Speak in COP:Yes

V. ADDITIONAL FEATURES

BRAILLE BUTTONS

FREE SERVICE FOR TWO YEARS

UNLOADING AT SITE

MINOR BUILDERS WORK

MACHINE SUPPORT, CAR & CWT ROPE ANCHORAGE CUSTOMIZATION WORKS

Warranty: 24 months

Part-B ( AMC of Lift )

Comprehensive Annual Maintenance Service Contract charges for 13 passengers lift (884 Kgs ) available in TTD Kalyanamandapam, Bhimavaram after completion of warranty period of 2 years. 3rd year AMC NOTE : The detailed scope of work attached in BOQ tender document

Comprehensive Annual Maintenance Service Contract charges for 13 passengers lift (884 Kgs ) available in TTD Kalyanamandapam, Bhimavaram after completion of warranty period of 2 years. 4 th year AMC NOTE : The detailed scope of work attached in BOQ tender document

Comprehensive Annual Maintenance Service Contract charges for 13 passengers lift (884 Kgs ) available in TTD Kalyanamandapam, Bhimavaram after completion of warranty period of 2 years 5th year AMC NOTE : The detailed scope of work attached in BOQ tender document

Scope of work: 1) Monthly checking and servicing the lifts and submit the service reports. 2) Attending to the lifts when called upon. 3) Repairing, overhauling the components of the equipment at site including replacement of wornt out parts when found necessary and submit the reports, lubricating the bearings of motor and fans when found necessary. 4) Replacement of ropes when found necessary. 5) Rewinding of motors replacement of V3F, door operators, cabin PCBs and motors board, limit switches, indicators etc., is under scope of contract except Car enclosure's, car flooring, hoist way enclosure, hoist way and car door, door and gate handles, door beading, door glasses, door frames, skills push box covers in landings and car electric incoming mains, main switch, EPABX Telephone intercom, fan and light fittings mirror, alarm bell and buzzer, emergency light, alarm device and batteries. 6) The lifts are to be repaired or rectified within 24 hours from the hour of defective condition for minor repairs. If major repairs are required the lift defects must be rectify within 15 days otherwise a penalty of Rs.1000/- per day. Note: Service reports should be send to concern DE(Elec)-I and Dy.EE(Elec)-VJA, AE/AEE(Elec.) -VJA section soon after every service.