63083 Annual Plan- DPT -TSR- 2025 -26 - CONSTRUCTION OF TOILET - GHSS DESAMANGALAM - VALLATHOLE NAGAR DIVISION - WADAKKANCHERY BP(PRO NO. S0439/26)-IN WADAKKANCHERY BP-General Civil Work-1

Work Name:Annual Plan- DPT -TSR- 2025 -26 - CONSTRUCTION OF TOILET - GHSS DESAMANGALAM - VALLATHOLE NAGAR DIVISION - WADAKKANCHERY BP(PRO NO. S0439/26)-IN WADAKKANCHERY BP-General Civil Work-1

湡⁤娨湯⁥䥉⥉†敤楲敶⁤牦浯渠瑡牵污猠畯捲獥›″牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⁥搠牥癩摥映潲慮畴慲潳牵散⥳ጮ䑏㤷㜰⼷〲㔲㈭㈰㨶ഉ匊灵汰楹杮愠摮映硩湩⁧牐獥敳⁤瑳敥楷摮睯⁳湡⁤敶瑮汩瑡牯⁳景猠慴摮牡⁤慰瑴牥楷桴映慲敭⁳獡瀠牥瀠潲楦敬漠⁦敳瑣潩獮㠠⨲㈶洠浥潢敳獤敨瑥猠畨瑴牥㔠⨰〲洠灳捥慩档湡敮爨癥牥敳愠摮戠慥楤杮 桳瑵整⁲㈱洠楤⁡潲⁤㔲㔪洠汦瑡眠瑩⁨㔷洠卓栠湩敧⁳潨歯‬㈱‵浭猠慴⁹湡⁤慨摮敬映牯眠湩潤獷眠瑩⁨敳瑣潩獮ㄠ㔰㘪‰浭甠楳杮ㄠ朸⠠㈱洠桴捩剃䅃 桳敥獴愠摮猠畨瑴牥⁳慭敤漠⁦敳瑣潩獮㜠⨵〳挠慭敤漠⁦敳瑣潩獮㜠⨵〳挠潦⁲畯整⁲瑳汹獥愠摮栠牯穩湯慴敭扭牥⁳湡⁤桴湥椠獮牥整⁤″浭瀠慬湩朠慬獳稠湩牣浯瑡⁥牰浩牥혮〱㈮区牴捵畴慲瑳敥潷歲爠癩瑥摥‬潢瑬摥漠⁲敷摬摥椠畢汩⁴灵猠捥楴湯ⱳ琠畲獳獥愠摮映慲敭⁤潷歲‬湩汣摵湩⁧畣瑴湩Ⱨ栠楯瑳湩Ⱨ映硩湩⁧湩瀠獯瑩潩湡⁤灡汰楹杮愠瀠楲業杮挠慯⁴景愠灰潲敶⁤瑳敥牰浩牥愠汬挠浯汰瑥⹥欀칧⸵㈲㘮区整汥爠楥普牯散敭瑮映牯删䌮䌮眠牯湩汣摵湩⁧瑳慲杩瑨湥湩Ⱨ挠瑵楴杮‬敢摮湩Ⱨ瀠慬楣杮椠潰楳楴湯愠摮戠湩楤杮愠汬挠浯汰瑥⁥灵潴瀠楬瑮⁨敬敶呬敨浲‭敍档湡捩污祬吠敲瑡摥戠牡⁳景朠慲敤䘠ⵥ

00D or more[email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)@13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)m13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)Š13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD79078/2025-2026:Providing and laying Anti-skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., completeû
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.¥50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.no¹50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.ª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.4
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wallmetre4
50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wallÓ50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2'
50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wallÌ50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2Ï
17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restseach@
17.7.1:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsã17.32.4:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mmš50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door ElbowÖ50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2™50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow™50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee™50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl)OD79076/2025-2026:15mm CP long body tap 
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre¯OD79083/2025-2026:Supplying and fixing ready made soak pit of size 90x90x90cm size spreading all around with 40mm Brick Aggregate including conveyance and fixing etc complete.©OD79079/2025-2026:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - PVC gully trap with SS grill.•50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow”50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend`9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mmy9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 7

620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).SOD79075/2025-2026:Supplying 65mm pad lock (6 lever) including all cost etc completeB
51.19.ST4:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 4. 35 to 50 flush capacitylOD79081/2025-2026:providing and fixing name board with necessary lettering as direction of officer in charge“OD207650/2025-2026:Supplying and fixing 18mm thick granite name board of any colour including lettering labour for fixing carriage etc complete.