S.I.T.C. of 2 Nos Weigh in motion 20T/Axle capacity 2 Nos Static Pitless type weigh bridge 40T capacity and Boom barriers at Dobra-Chathi Bridge in Distt Tehri Garhwal

Amount

S.I.T.C OF 20/40 Ton/Axle SLOW SPEED WEIGH IN MOTION Comprising of :- (a) Structure:- 3X0.7 meter fabricated with Mild Steel(SAIL/TISCO/JINDAL ISI) as per BIS 2062, Structure duly certified for Structural Analysis and design(STAAD)-III,IIT Equivalant ,Capacity 20/40 Ton/Axle. Accuracy of Weighing upto 2 % of full scale weight,In motion scale,Pit Type Flushed in ground installation,speed of weighing 1 to 15 kmph . (B) LOAD CELL- The typical Load cell WIM system consist of four load cell placed across the lane. Off –Scale detectors are integrated in to the scale assembly to sense any vehicle off the weighing surface . Load cells shall be of beam type which as in-built surge protection,hermetically sealed having IP68 approval (i) Type Beam Type(Flintec/Zemic/Vishay transducers) (ii) Anti Rusted Stinless steel (iii) Filling Strain Gauge (iv) Capacity 15 Tones each (v) Stationary Accuracy +/- 0.05% FSR (vi) In-motion Accuracy <+/-3% (vii) Safe guard limit 150 % (viii) Ultimate Overload 300 % (ix) Operating Temp Range – 10 degree to +65 degree C (x) Cable- 4 core RAT protected shield wires suitable for connection Load cell to junction box. (C) Vehicle separator – IR based curtain with minimum 12 sensors-housed in stainless steel pillars with proper sealing Axle counting . Size of curtain 500 mm, Range of IR Sensors 7 mtrs, Controller housing: water/weather proof with anti rust coating : IP65 Rated. (D) Magnetic Loop – (i) No's of Loop sensors : 04 (ii) Type of Loop Sensors : Inductive type (iii) Input/Output type : Duel channel (E) Control Panel with Indicator – Front Panel Calibration as per W & M Govt. of India sealed to avoid any manipulation. IS 2062 Powder coated with strap off Switch. IP-55 or more rated . (F) Junction box- IP65, suitable for 4 Load cell submission with required electronic components. (G) Cabling and wires for electrical connection (Havells/Finolex/Polycab make) as per site requirement.

S.I.T.C of Static weigh bridge PIT LESS TYPE 40/50 Ton capacity comprising of : IS9281:- (A) Technical Specification Static weigh bridge PIT LESS TYPE 40/50 Ton capacity (i)Platform size 7.5 mtrs x 3 mtrs (ii)Structure I Beam complying BIS 2062 , Top plates-10 mm or more steel as per BIS 2062,Main Beam ISMB 450 , Transom 250 & Runner Beam 200 mm. (iii) Structure duly certified for structural Analysis and design(STAAD)-III,IIT Equvalant (xi) Painting Anti-Rust and Anti-Corrosion Painting smoke Gray (xii) BIS specification IS-9281(Part-III) (xiii) Complaints: Legal metrology Act-2009( 1 of 2010 ) & Rules framed there under from time-duly sealed by the weight & measure department approval/certification weight and measure approved model class-III (ix) Make: SAIL/TISCO/JINDAL ISI (B) LOAD CELL – Load cell shall can be of any type with in-built surge protection,hermetically sealed construction of stainless steel with 17-4ph material or a better product towards anti rust with IP68 or better protection.OIML certification Type : Compression/DSB (Make-Flintec/Zemic/Vishay transducers) (i) Material : Stainless steel rust proof (ii) Filling : Strain Gauge (iii) Capacity :30 Tonnes each (iv) Safe Load Limit : 150 % (v) Ultimate Overload : 300 % (vi) Operating Temp Range : -10 degree to + 65 degree C (vii) IP Rating : IP 68 or better (viii) Cable- 4 core RAT protected shield wires suitable for connection Load cell to junction box. (ix) BIS specification : IS-9281(Part-III) (x) Approval/Certification by weight & measure deptt. (C) Junction box – Stainless steel Junction box shall be of IP65 Rated with built in surge protection suitable for 6/8 Load cell output submission . (D) Indicator – IP65 Rated, 8 digit segment, LED display RS 232/485 connection port . (E) Parallel window display- IP65 Rated, LED display

S.I.T.C of Electro-mechanical Boom Barrier ,auto & manually operated ,03 mtrs long ,100 % duty cycle,mild steel with Zinc coated housing frame(Inside and Outside)compliant to IP68 standard,swing open on impact, Maintenance free Torque motor drive,MTBF 5 million cycles,Power consumption 120 Watt,opening/ closing time 1.5 sec. complete with controller unit .(Make-Swaraj(Model-PAT 3) / Elka /BGI L 1009)

Supply & burring advance maintenance free earthing consisting 17.2 mm dia 3000 mm Long tripolar UL Listed CPRI tested , Cu coating thickness 250 micron with 40 Kg Z – earth chemical compouned . The rate shall include excavation of earthing filling with back fill compouned and earth pit chamber made of high density polyethylene for extra durability(HDPE), UV Protected earth pit covers-fibre reinforced.Resistant materials,assuring durability.Withstands up to 3 tonnes by weight in the ground level.as per IS 3084. At Top : 260mm x 260mm At Bottom : 150mm x 150mm Height : 260mm Make :- Indelec France/OBO Bettermann Germany

S/F of 15 mm dia ‘Medium’ class G.I Pipe for earth wire

S/F of 1x6.0 sqmm Copper wire in existing G.I Pipe as Earth wire

S.I.T.C of 5 KVA Online(1 Ph I/P & 1 Ph O/P) with 60 min battery backup and including battery cabinet complete.(Uniline/APC/Numeric make)

S/F of Armoured optical fibre 6 core single mode cable(Snider/Molex/equ make)

S/F of Computer including I3 processor, HDD 500 GB or more(sata made), RAM 4GB or more , OS WINDOW 7 or more, 17’ monitor(LED/TFT) , keyboard, mouse, etc

S/F of Thermal Printer for Reciept(Ticket generation purpose)

S/F of Laser Printer for Reporting Purpose For paper size A4 size

Providing of Software for Weight bridge & Weigh in Motion application and integrated with boom barriers, CCTV Cameras, Traffic signal Light for complete automation( in future if required )

Tollman International Pvt Ltd