Providing, Installation, testing and comm. of pumping machinery along with allied electro-mechanical works under WSS Duniyan Bhorna under JJM

Amount

(A) New tube well Duniyan: PProviding, Installation, testing & commissioning of two nos. submersible pump sets of ISI marked reputed make as per IS 8034 having specifications 3500 GPH x 100-150 Mtrs. Head along with allied works.

Providing, installation, testing & commissioning of two nos. HC pump sets as per various specifications of IS 1520 having specifications 4000 GPH x 200 Mtrs. Head along with allied works.

LT Control Panel, Voltage Stabilizer and allied electro-mechanical works : - Design, fabrication, installation, testing and commissioning of two nos. LT control panels with built in fault analyzer suitable for operation of two no. 50 HP HC pump sets. Providing and fitting of L&T make MU-G20 LT control panel for operation of submersible pump set. Providing, installation, testing and commissioning of 100 KVA, 3 phase, copper wound, unbalanced type, oil cooled manual voltage stabilizer with operating voltage of 320-480 Volts and operating frequency of 47-53 Hz conforming to relevant IS codes and IEC guidelines.

(B) Existing Dug well old Duniyan : Providing and installation of two nos. 3000 GPH x 16 Mtrs. Head mono submersible pump set along with L&T make MU-G10 panel and allied electro-mechanical works.

(C) Capped tube well Bhorna : Stabilization and yield testing of tube well by using submersible pump by way of lowering of submersible pump set of adequate capacity as per specifications till yield of well and draw down of the tube well and sand free water and is ascertained. Complete job including cost of materials such as jointing material, nuts & bolts, P.O.L, submersible pump with allied accessories and any other tools & tackles required during the completion of job in all respects. Providing, Installation, testing & commissioning of two nos. submersible pump sets of ISI marked reputed make as per IS 8034 having specifications 2500 GPH x 100 Mtrs. Head along with allied works at newly drilled tube well. Coupling of submersible pump-sets and testing it in testing pit at workshop and shifting to site of work. One no. submersible pump set (ready for lowering) is to be kept as standby at site.

(D) Filtration Plant Bhorna : Providing, installation, testing & commissioning of two nos. HC pump sets as per various specifications of IS 1520 having specifications 5000 GPH x 300 Mtrs. Head coupled with high-speed induction motor along with allied works.

LT Control Panel, Voltage Stabilizer and allied electro-mechanical works incl. earthing : - Design, fabrication, installation, testing and commissioning of two nos. LT control panels with built in fault analyzer suitable for operation of two no. newly installed 70 HP HC pump sets. Providing, installation, testing and commissioning of 100 KVA, 3 phase, copper wound, unbalanced type, oil cooled manual voltage stabilizer with operating voltage of 320-480 Volts and operating frequency of 47-53 Hz conforming to relevant IS codes and IEC guidelines. Providing and fitting of 3 nos. 50-watt outdoor type solar led light to be fixed properly on the side walls of the pump room. Earthing of all electric equipment’s installed in the pump room

(E) Existing Dug Well Bhorna: Providing and installation of two nos. mono submersible pump set of specifications 3000 GPH x 16 Mtrs. head along with L&T make MU-G10 LT panel and allied electro-mechanical works.

(F) Intake Well Duniyan: Providing, installation, testing and commissioning of two nos. mono block pump sets having specifications 5000 GPH x 40-50 Mtrs. Head including its allied works at intake well Duniyan. Providing of ISI mark make pump set, fitting of the same inside the pump room in a suitable place. Providing and fitting of LT panel suitable for operation of pump set. Making electrical connections of the pump set by providing and fitting of multistrand copper cable of suitable rating after proper thimbling and crimping. Testing the pump set. Complete job including cost and carriage of materials and labour charge etc.

(G) Existing Dug Well Duniyan New: Providing, Installation, testing & commissioning of one no. submersible pump set of ISI marked reputed make as per IS 8034 having specifications 5000 GPH x 100 Mtrs. Head along with allied works.

(H) Tool Kit : Providing of ISI marked tool kit complete with heavy-duty hand-held drill, angle grinder, bearing puller, adjustable wrench, hammers, variety of screw drivers, pliers, socket wrenches, files, open ended and ring spanners, allen keys, multimeter for maintenance of installed pumping machinery.

VK Mechanical Works