Providing & Laying 1400 mm dia. MS Pipeline from Inverted Syphon to Prop. RWPS, Construction of Raw Water Pumping Station & Rising main of 600 mm dia. DI-K9 pipe from Proposed RWPS to Sughad WTP of GMC Area.

Bill of Quantities For

Providing & Laying 1400 mm dia. MS Pipeline from Inverted Syphon to Prop. RWPS, Constuction of Raw Water Pumping Station

& Rising main of 600 mm dia. DI-K9 pipe from Proposed RWPS to Sughad WTP of GMC Area

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

01 4786.00 3 89.00 Rupees EightyNine Only

Excavation for pipeline trenches as per required gradient and line m

including all safety provision using site rails and stacking excavated

stuff including up to all required lead cleaning the site etc. complete

for all lift and strata as specified. In all sorts of Soil and soft murrum.

b) 1.5 to 3.0 m. 3999.00 m3 98.00 Rupees NinetyEight Only

b) 3.0 to 4.5 m. 3211.00 m 103.00 Rupees One Hundred Three Only

b) 4.5 to 6 m. 896.00 m3 109.00 Rupees One Hundred Nine Only

02 Supply and fabrication of mild steel pipes of 10 to 12 M minimum 700.00 Rmt 37781.00 Rupees ThirtySeven Thousand Seven Hundred

length in accordance with IS: 5822-1994 or its latest edition in EightyOne Only

suitable lengths from MS coils (coil shall be as per IS:10748 as per

its latest edition) Pipe manufactured shall be as per IS : 3589-2001

or is latest edition including cutting, bending of the plates/coils to

the required shapes, welding by submerged arch welding having

joints with bevelled ends, etc. complete as per detailed

specifications given in the tender including inside food grade

solvent free liquid epoxy lining & outside 3 LPE coated pipe. Hydro

testing, Ultrasonic testing in factory & at field (15% of welded

length of each pipe) as per IS-3589-2001 including all taxes,

insurance, transportation, octroi, inspection charges, loading and

unloading, lowering, laying and jointing etc. complete.

1422 mm Outside diameter with 12.5 mm thick MS plate

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

03 Supply, fabrication, transporting, including all taxes, insurance etc. 15430.00 Kg 98.00 Rupees NinetyEight Only

aligning & fixing in position flange ends and mild steel specials and

fixtures including inside food grade lining and outside 3 LPE

Coated pipe in accordance with IS : 5822-1994 or its latest edition

from MS plates or coils (plate shall be as per IS : 2062 as per its

latest edition of Grade-B Fe-410 & coil shall be as per IS : 10748 as

per its latest edition). Pipe manufactured shall be as per IS : 3589-

2001 or its latest edition including cutting, bending, drilling holes

and complete welding. The rate also includes supply of rubber

packing, bolts, nuts etc. wherever required including Ultrasonic

testing in factory & at field (15% of welded length of each joint) as

04 Providing, supplying, and fixing ISI mark Ductile Iron D/F Double 1.00 No 582935.00 Rupees Five Lacs EightyTwo Thousand Nine

Eccentric Electrically Actuator operated Butterfly valve including Hundred ThirtyFive Only

all taxes , insurance, transportation, freight charges, Octroi,

inspection charges, loading, unloading, conveyance to site stacking

a) 1000 mm dia (Sluice valve)

05 Supply, installation, testing and commissioning of Flange ends 2.00 No. 88200.00 Rupees EightyEight Thousand Two Hundred Only

Expansion Bellow (PN 1.0) as per EJMA standards and as per specs.

complete in all respect for following Size.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

06 Providing, supplying, ISI mark Cast Iron D/F manually Gear 1.00 No 53384.00 Rupees FiftyThree Thousand Three Hundred

operated Scour /Sluice Valve including all taxes, insurance, EightyFour Only

transportation, freight charges, Octroi, Inspection, charges, loading,

unloading, conveyance to site stacking, etc. complete valve with ISI

PN 1.0 with PD type short body

450 mm dia. - Scour Valve

07 Lowering, laying ,Fixing & jointing in position Scour Valve including 1.00 No 2760.00 Rupees Two Thousand Seven Hundred Sixty Only

cost of all labour, jointing material, including nut bolts & giving

satisfactory hydraulic testing, etc. complete.

450 mm dia. - Scour Valve

08 Providing and supplying CI/DI Tamper proof /Bi Stream Air valves 2.00 No. 40595.00 Rupees Fourty Thousand Five Hundred

with SS 304 Float gun metal nozzle of approved make & quality of NinetyFive Only

following class and diameter including all taxes,insurance,

transportation, freight charges, octroi,inspection charges, loading,

unloading, conveyance to the departmental stores, stacking etc.

With Isolating Sluice Valve PN

09 Lowering, laying & jointing in position following air Valves including 2.00 No. 857.00 Rupees Eight Hundred FiftySeven Only

cost of all labour, jointing material, including cost of all

labour,jointing material including nut bolts & giving satisfactory

hydraulic testing, etc. complete.

10 6.00 3 3758.19 Rupees Three Thousand Seven Hundred

Providing and laying cement concrete M15 (1:2:4) (1 cement : 2 m

coarse sand : 4 hand broken stone aggregate 20 mm nominal size) FiftyEight and Paise Nineteen Only

and curing etc. complete (Excluding cost of form work) For

Foundation and in plinth(up to 10 ton)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

11 Providing and laying controlled cement concrete M20 (1:1.5:3) for 173.00 Cum 4422.47 Rupees Four Thousand Four Hundred TwentyTwo

thrust block & encasing including formwork but excluding the cost and Paise FourtySeven Only

of reinforcement with curing etc. complete, as directed.

12 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. C. 2.00 MT 77285.20 Rupees SeventySeven Thousand Two Hundred

work including bending, binding and placing in position complete EightyFive and Paise Twenty Only

upto floor two level.

13 Extra rate over item of excavation of earth for excavation of asphalt 365.00 m2 200.00 Rupees Two Hundred Only

pavement/RCC of thickness upto 0.30 meter including demolishing

the asphalt carpet, metal, soiling/cutting Reinforcement etc. comp.

with stacking the material as directed. (i) up to 0.30 meter (By any

type of Breaker Machine or R.C.C Cutter machine including cost of

operator, fuel & transportation etc complete.

14 Reinstatement of Bituminous road including with 40 mm thick 365.00 m2 1945.00 Rupees One Thousand Nine Hundred FourtyFive

Bituminous Concrete using 5.4 % Asphalt ,50 mm thick DBM using Only

4.5 % Asphalt with tack coat using RS 1 emulsion @ 2.5 Kg/Sqm

with Tack coat using RS 1 emulsion @ 2.5 Kg/Sqm, Prime coat with

SS 1 emulsion @ 7.5 kg/Sqm,250 mm thick WMM , 200 mm thick

GSB I loosening and recompacting ground as per respective

MoRTH specification and as directed by engineer in charge.

15 Demolition including stacking of serviceable materilas 888.00 m3 1110.75 Rupees One Thousand One Hundred Ten and

and disposal of unserviceable materials with all lead and Paise SeventyFive Only

lift. (i) R.C.C. work

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

16 Construction of 250 mm thick un-reinforced plain cement concrete 2960.00 mt2 1870.00 Rupees One Thousand Eight Hundred Seventy

pavement with M - 40 grade of concrete including provision of Only

contraction, construction and longitudinal joints, joint filler,

sealant primer, joint sealant, finishing to lines and grades as per

drawing as per MoRTH clause 602 over a 100 mm thick DLC with

necessary excavation/loosening and recompacting ground as per

respective MoRTH specification and as directed by engineerin

17 Refilling the pipeline trenches incl. ramming, watering, 7673.00 m3 22.00 Rupees TwentyTwo Only

consolidating desposal of surplus stuff as directed within a radius

18 Construction of chambers in RCC M30 with TMT Fe-500 167.00 m3 89.00 Rupees EightyNine Only

reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside

cement plaster in C.M.1:3 with OPC cement and depth of chamber

from G.L. to pipe invert level including complete civil works and

inclusive of the cost of excavation, refilling and PVC foot steps

including providing RCC Slab in one single piece with fixing of FRC

(heavy duty) manhole frame and cover or RCC 1:2:4 Precast slab in

parts with key hole etc. complete.

m. 167.00 m3 98.00 Rupees NinetyEight Only

3.0 m. to 4.5 m. 167.00 m3 103.00 Rupees One Hundred Three Only

4.5 m. to 6.0 m. 139.00 m3 109.00 Rupees One Hundred Nine Only

b) PCC M-15 13.00 m3 3758.19 Rupees Three Thousand Seven Hundred

FiftyEight and Paise Nineteen Only

c) RCC M 30 90.00 m3 8083.00 Rupees Eight Thousand EightyThree Only

RC.C. Top Slab 15.00 m3 8213.00 Rupees Eight Thousand Two Hundred Thirteen

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

RC.C. Base Slab 21.00 m3 8213.00 Rupees Eight Thousand Two Hundred Thirteen

d) TMT Fe-500 Reinforcement 10.00 MT 77285.20 Rupees SeventySeven Thousand Two Hundred

EightyFive and Paise Twenty Only

e) 20 mm thick Inside Cement Plaster in CM 1 : 3 294.00 m2 286.10 Rupees Two Hundred EightySix and Paise Ten

f) FRC Manhole 6.00 No. 2380.00 Rupees Two Thousand Three Hundred Eighty

g) Refilling 356.00 m3 22.00 Rupees TwentyTwo Only

h) PVC steps 102.00 No. 87.00 Rupees EightySeven Only

19 Conveyance of materials such as murum, earth, kapchi, gravel, brick 6784.00 m2 103.26 Rupees One Hundred Three and Paise TwentySix

bats, kankar, sand, debris etc. from the site to approved location, Only

including loading, unloading, stacking and spreading etc. complete. (

Pushing work for Crossing 1400 mm dia. MS pipeline (Carrier pipe) by 1800 mm dia RCC NP4 Casing Pipe for crossing Gas Pipeline

01 Laying 1.8 m. dia. RCC NP4 pipe ( by Pushing method) of required

length including open excavation for thrust bed necessary form

work, concreting, curing, vibrating , pushing etc. complete as per

contractor's own design approved by competent authority based on

approved GAD by competent authority. The item includes

(a) Providing and laying M-25 grade for cast in situ thrust bed

and thrust wall with necessary excavation with shoring and

strutting, formwork, curing, vibrating as per contractor's

own design approved by Authority.

(b) Providing and laying RCC pipe

(c) Providing and fixing TMT-Fe-500 bars for RCC pipe

including thrust bed and thrust wall including supplying,

cleaning, cutting, bending and placing in position, lapping,

binding with 16 SWG soft iron wire irrespective of locations

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

(d) Providing front shield, intermediate shield, jointing, jacking

rigs, sliding channels spacers etc. All the structural steel

used except intermediate shields will be ownership of

contractor after pushing work is completed.

(e) Pushing with hydraulic jack without disturbance to

pavement including all necessary excavation for thrust bed

and thrust wall, necessary shoring and strutting required,

necessary dewatering required if any, excavation within the

Pipe with all necessary refilling upto ground level after

pushing work completed including carting of extra earth

upto a lead of 5 Kms. This also includes necessary labour

cost for pushing and including necessary cost of hydraulic

pipe and oil for hydraulic jacks including necessary

depreciation cost of jack.

(f) Applying 2 coats of approved quality epoxy painting on top

and sides of precast units after casting work completed

including necessary groutings with cement between two

precast units after pushing work is completed.

a) 1800 mm dia. RCC NP4 pipe 30 Rmt. 57520 Rupees FiftySeven Thousand Five Hundred

02 Excavation for tenches as per required gradient and line including 56 m3 89 Rupees EightyNine Only

all safety provision using site rails and stacking excavated stuff

including up to all required lead cleaning the site etc. complete for

all lift and strata as specified.In all sorts of Soil and soft murrum.

b) 1.5 to 3.0 m. 56 m3 98 Rupees NinetyEight Only

c) 3.0 to 4.5 m. 56 m3 103 Rupees One Hundred Three Only

d) 4.5 to 6.0 m. 56 m3 109 Rupees One Hundred Nine Only

e) 6.0 to 7.5 m. 37 m3 113 Rupees One Hundred Thirteen Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

03 Constructing RCC Chamber built in RCC M30 grade concrete with 6 m3 3758.19 Rupees Three Thousand Seven Hundred

TMT Fe-500 reinforcement including PCC M 15, RCC M30 for wall, FiftyEight and Paise Nineteen Only

base slab and top slab, including formwork etc. complete. Concrete

work should be fair finish.

b) RCC (M-30) 12 m3 8213 Rupees Eight Thousand Two Hundred

i) Top Slab Thirteen Only

ii) Bottom Slab 12 m3 8213 Rupees Eight Thousand Two Hundred

iii) Wall 58 m3 8083 Rupees Eight Thousand EightyThree Only

c) Reinforcement TMT Fe-500 10250 Kg 77.29 Rupees SeventySeven and Paise TwentyNine

04 Providing and applying 15 mm thick cement plaster in single coat on 170.00 m2 185.41 Rupees One Hundred EightyFive and Paise

brick / concrete work for interior plastering upto floor any level FourtyOne Only

finished even and smooth in Cement mortar 1:3 (1 cement : 3 sand)

including racking out joint curing, scaffolding required if any, with

necessary cement finishing etc. complete as directed.

05 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 46.00 m2 315.69 Rupees Three Hundred Fifteen and Paise

coarse sand : 4 graded stone aggregate 20 mm nominal size) SixtyNine Only

including finishing with a floating of neat cement etc. complete laid

in one layer finished including necessary curing and with ordinary

portland cement. 40 mm thick.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

06 Providing F.R.C. MH seat cover incl. carting to the work site etc. 2.00 No. 2380.00 Rupees Two Thousand Three Hundred Eighty

comp. Directed. Only

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover:

728mmø & 100 mm thick circular cover, 35.00MT load design,100 x

2mm MS flat all round,16mm øplain round bar for lifting the cover

& should be fitted with plastic cups. Frame:560mm ø clear opening,

-888 x 888 x 175mm. On the upper periphery off rame 25x3 mm

wide MS flat should be well embed in concrete to protect the edges

off rame. FRCE.H.D.-35 manhole cover & frame described as above.

07 Providing and fixing water tight construction or expansion joints 150 34.00 Rmt 330.00 Rupees Three Hundred Thirty Only

mm. dia. Wide thin ribbed PVC

08 Extra rate over item of excavation of earth for excavation of asphalt 40 Sq.m. 200 Rupees Two Hundred Only

pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker

machine) including cost of operator , fuel & transportation etc.

09 Providing and supplying lSI Standard R.C.C. pipes(of OPC) in 30 Rmt. 19067 Rupees Nineteen Thousand SixtySeven Only

standard lengths of following class and diameter suitable Socket

and Spigot joints including EPDM Rubber Ring as per IS 5382-1985

including all taxes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. (IS - 458 -2021)

RCC NP4 Pipe (with OPC Cement)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

10 Supply and fabrication of mild steel pipes of 10 to 12 M minimum 30 Rmt. 38989 Rupees ThirtyEight Thousand Nine Hundred

length in accordance with IS: 5822-1994 or its latest edition in EightyNine Only

suitable lengths from MS coils (coil shall be as per IS:10748 as per

its latest edition) Pipe manufactured shall be as per IS : 3589-2001

or is latest edition including cutting, bending of the plates/coils to

the required shapes, welding by submerged arch welding having

joints with bevelled ends, etc. complete as per detailed

specifications given in the tender including inside food grade

solvent free liquid epoxy lining & outside 3 LPE coated pipe. Hydro

testing, Ultrasonic testing in factory & at field (15% of welded

length of each pipe) as per IS-3589-2001 including all taxes,

insurance, transportation, octroi, inspection charges, loading and

unloading, lowering in pipe, laying and jointing etc. complete.

1422 mm Outside diameter 12.5 mm thick MS plate

11 Refilling the trenches including ramming, watering, consolidating 130 m3 22 Rupees TwentyTwo Only

etc. complete as directed within radius of 3 Km.

12 Providing and fixing plastic moulded reinforced steps with 10 mm 47 No. 87 Rupees EightySeven Only

TOR steel bar with plastic polyproclene (P.P.) material (vergin)etc

13 Carting of excavated material such as murrum, earth, kapachi, 169 m3 103.26 Rupees One Hundred Three and Paise

gravel, brickbats, kankar, debris, sand, dismantled material, TwentySix Only

including loading, unloading, stacking etc. complete at non

objectional place as directed by engineer in charge.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

CONSTRUCTION OF RAW WATER SUMP & PUMP HOUSE AT SUGHAD IN GMC AREA

01 Excavation for foundation for loose and soft soil including sorting 6904 m3 123.13 Rupees One Hundred TwentyThree and Paise

out and stacking of useful materials and disposing of the excavated Thirteen Only

stuff up to 50 meter lead.

a) From 0.0 to 1.5 m.

b) From 1.5 to 3.0 m. 6223 m3 136.3 Rupees One Hundred ThirtySix and Paise

c) From 3 to 5.0 m. 7790 m3 149.65 Rupees One Hundred FourtyNine and Paise

d) From 5 to 6.0 m. 3892 m3 171.83 Rupees One Hundred SeventyOne and Paise

EightyThree Only

e) From 6 to 7.0 m. 1573 m3 194.01 Rupees One Hundred NinetyFour and Paise

f) From 7 to 8.0 m. 730 m3 216.19 Rupees Two Hundred Sixteen and Paise

g) From 8 to 9.0 m. 513 m3 238.37 Rupees Two Hundred ThirtyEight and Paise

ThirtySeven Only

02 Extra over item no. 1 above for lead from 50 m to 5 Kms. as 4652 m3 76.64 Rupees SeventySix and Paise SixtyFour Only

03 Extra over item no. 1 above for lead from 5 Kms. to 10 Kms. as 4652 m3 103.26 Rupees One Hundred Three and Paise

directed. TwentySix Only

04 Filling with available excavated earth (excluding rock) in trenches, 18320 m3 136.92 Rupees One Hundred ThirtySix and Paise

plinth, sides of foundation in layers not exceeding 20 cm in depth NinetyTwo Only

consolidating each deposited layer by ramming and watering.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

05 Providing and laying cement concrete M15( 1:2:4) (1 cement : 2 20 m3 3758.19 Rupees Three Thousand Seven Hundred

coarse sand : 4 hand broken stone aggregate 20 mm nominal size) FiftyEight and Paise Nineteen Only

and curing etc. complete (Excluding cost of form work) For

Foundation and in plinth

06 Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 353 m3 4122.32 Rupees Four Thousand One Hundred

coarse sand : 4 graded stone aggregate 20 mm nominal size) and TwentyTwo and Paise ThirtyTwo Only

curing etc. complete (with form work) For Foundation and in plinth

07 Providing and laying controlled cement concrete M30 for water 1581 m3 8213 Rupees Eight Thousand Two Hundred

retaining structures with vibrating, curing etc. complete including Thirteen Only

the cost of form work but excluding the cost of reinforcement for

RCC work stated below etc. complete at any height as directed.

a) R.C.C. baseslab and footings

b) R.C.C. walls and baffle wall 1095 m3 8083 Rupees Eight Thousand EightyThree Only

c) R.C.C. staircase 11 m3 8395 Rupees Eight Thousand Three Hundred

NinetyFive Only

d) R.C.C Beams 52 m3 8486 Rupees Eight Thousand Four Hundred

e) R.C.C. Top slab 112 m3 8213 Rupees Eight Thousand Two Hundred

f) RCC Column 81 m3 9317 Rupees Nine Thousand Three Hundred

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

08 Providing and laying controlled cement concrete M25 for 85 m3 8347 Rupees Eight Thousand Three Hundred

foundation and superstructure with vibrating, curing etc. complete FourtySeven Only

including the cost of form work but excluding the cost of

reinforcement for RCC work stated below etc. complete at any

height, as directed.

a) R.C.C. beams, lintels plinth beams, tie beams.

b) R.C.C. slabs and platform 75 m3 8077 Rupees Eight Thousand SeventySeven Only

c) R.C.C. weather shed, pardi & staircase 20 m3 8266 Rupees Eight Thousand Two Hundred SixtySix

d) R.C.C. columns 124 m3 9195 Rupees Nine Thousand One Hundred

NinetyFive Only

e) R.C.C. footing 10 m3 8077 Rupees Eight Thousand SeventySeven Only

09 Providing TMT Bar Fe-500D reinforcement bars for R. C. C. work 430.87 MT 77285.2 Rupees SeventySeven Thousand Two

including bending, binding and placing in position complete upto Hundred EightyFive and Paise Twenty Only

floor two level.

10 Providing and laying one layer of bitumen kraft paper conforming to 2050 m2 13 Rupees Thirteen Only

IS : 1398 of approved make and quality.

11 Grouting with 1:3 cement, sand mortar for anchor bolt pockets, 10 m3 3628.28 Rupees Three Thousand Six Hundred

machine bases, pipe sleeves, pockets holes, etc. including TwentyEight and Paise TwentyEight Only

roughening and cleaning of concrete surfaces, curing, etc. complete.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

12 Supplying, cleaning, cutting, bending, welding, fabricating, errecting 16953 kg 99 Rupees NinetyNine Only

strucural steel in position ir-respective of locations and levels as per

drawing including handling and transport etc. complete including

applying two coats of primer red oxide and two coats approved

quality of paint over it etc. complete as directed for gentry girder,

platform, stairs, chequered plate for cable trench etc.

13 Providing and fixing precast reinforced cement concrete trench 10 m3 6504 Rupees Six Thousand Five Hundred Four Only

covers, hatch covers, etc. of Class M20 with 20 mm downgraded

coarse aggregate excluding reinforcement but including shuttering,

vibrating, curing, all handling, transporting etc. complete with water

proofing compound

14 Providing and applying 20 mm thick inside cement plaster with 2148 m2 298.1 Rupees Two Hundred NinetyEight and Paise

water proofing agent on inside of sump consisting of 12 mm thick Ten Only

backing coat of CM 1:3 (1 cement : 3 sand) and 8 mm thick finishing

coat of CM 1:1 (1 cement : 1 sand) etc. complete including

necessary curing, scaffolding required if any etc. complete.

15 Providing and applying 15 mm thick cement plaster in single coat on 2150 m2 236.03 Rupees Two Hundred ThirtySix and Paise

brick work with floating coat of net cement slurry for interior Three Only

plastering of pumphouse and outside plastering of sump upto

finished even and smooth in Cement motar 1 : 3 (1 cement :

sand) including racking out joint curing, scaffolding required if any,

with necessary cement finishing etc. complete as directed.

(ii) Ceiling 423 m2 262.08 Rupees Two Hundred SixtyTwo and Paise

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

16 20 mm thick sand faced cement plaster on walls upto height 10 967 m2 315.69 Rupees Three Hundred Fifteen and Paise

metres above ground level consisting of 12mm thick backing coat of SixtyNine Only

C.M. 1:3 (1-cement : 3-sand) and 8 mm thick finishing coat of C.M.

1:1 (1-cement : 1 sand) etc. complete.

17 Providing and laying 40 mm thick cement concrete flooring in 1:2:4 961 m2 323.06 Rupees Three Hundred TwentyThree and

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Paise Six Only

nominal size) including water proofing compound finishing with a

floating of neat cement etc. complete laid in one layer finished

including necessary curing with sulphate resistant cement.

Average 40 mm thick

18 Providing and laying 40 mm thick heavy duty cement concrete 294 m2 323.06 Rupees Three Hundred TwentyThree and

flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Paise Six Only

aggregate 20 mm nominal size) with ironite powder including

finishing with a floating of neat cement etc. complete.

19 Providing and laying polished Kota stone slab 25 mm thick in riser of 19 m2 1226.46 Rupees One Thousand Two Hundred

steps, dado & pillars, skirting, laid on 10 mm thick cement mortar TwentySix and Paise FourtySix Only

1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry

including rubbing and polishing etc. complete

20 Providing and laying polished Kota stone slab flooring over 20 mm 130 m2 1131.24 Rupees One Thousand One Hundred

(average) thick base of cement mortar 1:6 (1 cement : 6 coarse ThirtyOne and Paise TwentyFour Only

sand) laid over and jointed with grey cement slurry including

rubbing and polishing etc. 30 mm thick

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

21 Providing and laying polished Kota stone slab 20 to 25 mm thick in 32 m2 1279 Rupees One Thousand Two Hundred

Sills & Jambs of doors, Windows & Vent laid on 10 mm thick SeventyNine Only

cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey

cement slurry including rubbing and polishing etc. The rate Shall

also include half round bullet edge complete as directed by

engineer inchage.

21 Providing F.R.C. MH seat cover incl. carting to the work site etc. 5 No. 2380 Rupees Two Thousand Three Hundred Eighty

comp. Directed. F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers Only

& Frames Cover: 728mmø & 100 mm thick circular cover, 35.00MT

load design,100 x 2mm MS flat all round,16mm øplain round bar for

lifting the cover & should be fitted with plastic cups. Frame:560mm

ø clear opening, -888 x 888 x 175mm. On the upper periphery off

rame 25x3 mm wide MS flat should be well embed in concrete to

protect the edges off rame. FRCE.H.D.-35 manhole cover & frame

described as above.

22 Providing 100 mm x 100 mm size vata in cement mortar (1:1) 131 Rmt 24.28 Rupees TwentyFour and Paise TwentyEight

including smooth finish, curing, etc. complete. Only

23 Providing 100 mm x 100 mm size vata in cement concrete (1:2:4) 310 Rmt 21 Rupees TwentyOne Only

including water proofing compounds, smooth finish, curing, etc.

complete for the internal side of the sump, pump house and

chlorination room.

24 Brick work using common burnt clay building bricks having crushing 190 m3 4502.81 Rupees Four Thousand Five Hundred Two

strength not less than 35 kg/cm2 in superstructure and parapet in and Paise EightyOne Only

cement mortar 1:6 (1 cement : 6 coarse sand) including racking out

joints, curing, scaffolding required in any as directed.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

25 Brick work using common burnt clay building bricks having crushing 50 m3 4244.85 Rupees Four Thousand Two Hundred

strength not less than 35kg / Sq. C. M. in ramp, steps and FourtyFour and Paise EightyFive Only

Foundation & Plinth in cement morter1:5 (1 cement : 5 coarse sand)

including racking out joints, curing, scaffolding required if any etc.

complete, as directed.

26 Providing Half brick masonry in common burnt clay building bricks 20 m2 601.17 Rupees Six Hundred One and Paise

having crushing strength not less than 35 Kg/cm2 in C. M. 1:4 for Seventeen Only

partition work including raking out joints, curing, scaffolding etc.

complete as directed for any height.

27 Wall painting (two coats) with plastic emulsion paint of approved 967 m2 83.18 Rupees EightyThree and Paise Eighteen Only

brand and manufacture of undercoated wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropings and other foreign matter and sand papered smooth.

28 Distempering (two coats) with oil bound distemper of approved 2150 m2 112.58 Rupees One Hundred Twelve and Paise

brand and manufacture and or required shade on undecorated wall FiftyEight Only

surface to give an even shade, over and including a priming coat

with distemper primer of approved brand and manufacturer after

thoroughly brushing the surface free from mortar dropping and

other foreign matter also including preparing the surface even and

sand papered smooth.

29 Applying two coats of Birla(white cement based) or Asian 2150 m2 40.59 Rupees Fourty and Paise FiftyNine Only

(acryliclapy putty) or equivalent & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matte rand sand papered smooth.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

30 Providing and fixing iron doors including using the frames of 609 Kg 99 Rupees NinetyNine Only

channels, angles and flats and MS sheets as per drawing including

revating or welding and fixing in concrete block including iron

fixture and fastening with one coat of primer and 3 coats of enamel

paint etc. complete.

31 Providing & fixing in position aluminium fully panelled doors with 15 8 m2 3500 Rupees Three Thousand Five Hundred Only

micron natural matt brush finish anodised as per over all size shown on

the drawings and aluminium sections of approved make conforming to

IS:733 and IS : 1285, made out of 102 mm x 45 mm x 1.90 mm thick

aluminium outer frame section weighing 1.640 Kg/m. and shutter sections

with bottom / lock rail 96 mm x 45 mm x 2.7 mm, top rail 48 mmx 45 mm

x 2.70 mm weighing 1.38 Kg/m. vertical styles 48 mm x 45 mm x 1.90 mm

weighing 0.976 Kg/m. with rounded sides, fixed with rawl plugs and

screws or with fixing clips, or with expansion hold esters including

necessary filling up of gaps at junctions, at top, bottom and sides with

required PVC/neoprene felt etc. and aluminium snap beading for glazing /

panelling, C. P. brass/stainless steel screws, including standard anodised

aluminium fittings and fixtures of approved make and of adequate size

and in adequate numbers, double action floor springs of approved make

for each shutter with standard pivot panels of 12 mm thick pre-laminated

three layer medium density, exterior grade particle board (termite proof,

water proof and fire proof) Grade 1, Type II conforming to IS :

bounded with phenol formaldehyde synthetic resin, of approved make

including cost and fixing of fixtures etc. complete as per detailed drawings

with all lead and lifts.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

32 Providing and fixing window having extruded aluminum Colour 37 m2 1583.95 Rupees One Thousand Five Hundred

anodized section frame main outer size 95mm x 24mm x 1.17 mm EightyThree and Paise NinetyFive Only

(of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt), horizontal Three

track member size 92mm x 31.75 mm x 1.30 mm (of Jindal Section

no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50 mm (of Jindal Section no. 8933, @ Wt. 1.06 Kg/mt.)

with sliding shutters of horizontal member size 40mm x 18mm x .29

mm (of Jindal section no. 8947 @ wt. 0.456 Kg/mt.) vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no.

8949 @ wt. of 0.456 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per

33 Providing and fixing standared extruded of alluminimum section of 11 m2 1175.56 Rupees One Thousand One Hundred

size 63mm x 38.10mm x 1.2mm (Jindal Section : 2434, @ Wt. 0.643 SeventyFive and Paise FiftySix Only

Kg/mt.) with colour powder coated alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete for Ventilation

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

34 Providing & fixing in position aluminium grill with 15 micron natural 48 m2 1975 Rupees One Thousand Nine Hundred

matt brush finish anodised as per over all size shown on the SeventyFive Only

drawings and aluminium sections of approved make conforming to

IS:733 and IS : 1285, made out of DG - 104 design ( Jindal or

equivalent ) fixed with required size F channel, rawl plugs and

screws or with fixing clips, or with expansion hold esters including

necessary filling up of gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt etc. and aluminium snap beading

for glazing / panelling, C. P.brass/stainless steel screws, including

standard anodised aluminium fittings and fixtures of approved

make and of adequate size and in adequate numbers, including cost

and fixing of fixtures etc. complete as per detailed drawings with all

lead and lifts.

35 Providing and fixing rolling shutter of approved make made of 80 12 m2 3554.4 Rupees Three Thousand Five Hundred

mm. wide M.S. laths inter lock together their entire length and FiftyFour and Paise Fourty Only

jointed together at the end locks mounted on specially designed

pipe shaft with bracket plates, guide channels and outside locking

with push- pull operation including the cost of hood cover and

spring etc. complete

a) Shutters having width below 3.5 m.

36 Providing and fixing 32 mm dia SS 304 pipe railing with Three 3420 kg 583 Rupees Five Hundred EightyThree Only

horizontal raws of pipe and posts of 32 mm dia SS 304 pipe of 1.0 m

height and placed at 1.5 m c/c including welding, grinding,

buffing,polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners, stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

37 Painting two coats including priming coat on new steel & other 100 Sq.M. 128.62 Rupees One Hundred TwentyEight and Paise

metal surfaces with enamel paint, brushing, interior to give an SixtyTwo Only

even shade including cleaning the surface of all dirt, dust, other

foreign matter.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

38 Providing,Supplying and fixing ISI mark G.I pipes with coupling of 10 Rmt 190 Rupees One Hundred Ninety Only

following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges,

loading,unloading, conveyance to departmental stores, stacking etc.

complete (IS:1239)Medium Duty.

a) 25 mm dia GI pipe sleeves

b) 32 mm dia GI pipe sleeves 10 Rmt 249 Rupees Two Hundred FourtyNine Only

c) 50 mm dia GI pipe sleeves 10 Rmt 387 Rupees Three Hundred EightySeven Only

d) 80 mm dia GI pipe sleeves 10 Rmt 625 Rupees Six Hundred TwentyFive Only

e) 100 mm dia GI pipe sleeves 10 Rmt 898 Rupees Eight Hundred NinetyEight Only

f) 150 mm dia GI pipe sleeves (Medium duty) 10 Rmt 1404 Rupees One Thousand Four Hundred Four

39 Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. 35 Rmt 2950 OnlyNine Hundred Fifty

Rupees Two Thousand

Flats 10 mm x 75 mm with 20 mm dia steel bar steps in double Only

rows, @ 30 em C/C. The include stays of 10 mm x 50 mm flats

fixed at 3 meter C/C wtih welding anchoring and 3 coats

anticorrosive paint. (M.S. ladder (without safty cage)

40 Providing and fixing PVC pipe of 6Kg./cm2 of 140 mm dia for rain 60 Rmt 470 Rupees Four Hundred Seventy Only

water with shoe.

41 Filling in plinth with sand under floors including watering, ramming, 50 m3 481.7 Rupees Four Hundred EightyOne and Paise

consolidating and dressing etc. complete as directed. Seventy Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

42 Providing, Fabricating & fixing name board of Size 3.00mX0.60 1 No. 11965 Rupees Eleven Thousand Nine Hundred

made from ISA 50X50X5 mm M.S angle with 3 Nos supports at back SixtyFive Only

side vertical member of angle size 1.1m ht incl 0.3 m hold fast

inserted in compound wall with necessary dismantling and fixing

with cement concrete. The rate shall also incl 16 g M.S sheet of size

3.00X0.60 mt incl writing letter with GMC logo as directed by EIC.

rate shall incl painting board with 2 coat of enamal paint over one

coat of anti-corrosive primet

43 Providing and laying chequered precast concrete tiles 22 mm thick 70 m2 545.76 Rupees Five Hundred FourtyFive and Paise

with aggregates of size up to 6 mm in floors, treads & Riser of steps SeventySix Only

and landing of sump of 20 mm thick bed of cement mortar 1:6 with

neat cement slurry with pigment to match the shade of tiles.

44 Providing and laying broken Chine Mosaic flooring for terrace using 430 m2 779.7 Rupees Seven Hundred SeventyNine and

12 mm to 20 mm broken pieces of glazed tiles to be laid over Paise Seventy Only

Cement mortar 1:3 to plain or slope and to be tempered to bring

mortar crème out upto surface using white cement including

rounding of junctions and extending them upto 15 cm. along the

wall, clearing with water and oxalic acid etc. as directed.

45 Providing precast cement concrete jali or louvers 40 mm thick 1:2:4 2 m2 743.67 Rupees Seven Hundred FourtyThree and

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm Paise SixtySeven Only

nominal size) reinforced with 1.6 mm dia. Mild steel wire including

roughening, cleaning, fixing and finishing in CM 1:3 and curing,

painting complete

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

46 Providing and fixing water tight construction or expansion joints 150 1490 Rmt. 330 Rupees Three Hundred Thirty Only

mm. dia. Wide thin ribbed PVC.

47 Providing and fixing plastic moulded reinforced steps with 10 mm 90 No. 87 Rupees EightySeven Only

TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc.

48 Providing and laying Rough chiseled stone dressed flooring over 20 165 m2 576.79 Rupees Five Hundred SeventySix and Paise

mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse SeventyNine Only

sand) including pointing with cement mortar 1:2 (1 cement : 2 stone

dust) etc. complete at top of walkway.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

SCHEDULE OF QUANTITIES & RATES FOR SITC OF ELECTRICAL, MECHANICAL & INSTRUMENTATION WORKS WITH 5 YEARS O&M FOR RAW WATER PUMPING STATION (RWPS) AT

SUGHAD WTP OF GMC.

1.1.1 MECHANICAL WORK: 2 Set 1637450.00 Rupees Sixteen Lacs ThirtySeven Thousand

VT PUMP-MOTOR SET:

Four Hundred Fifty Only

Supply, Installation, Testing and Commissioning (SITC) of Vertical Turbine Pump of

following duty parameters & guaranteed efficiency of following MOC, having max.

speed as mentioned below, suitable to couple with motor of specified rating

vertical flange mounted TEFC sq. cage induction motor, along with column and

bowl assembly, discharge head, base channel / Rolled Steel Joist etc. MOC: Impeller

& sealing rings- CF8M, Bowl & suction bell of CI FG 260 as per IS 210 with 2 % Ni,

Shaft with coupling - SS410, Column Pipe of M.S. ERW of min. 600 mm dia. & min.

8.0 mm thickness and each piece of 1.25 / 2.5 m long pipes and total length as per

actual site requirement and to achive min. submergence requirement, MS Base

plate, Thordon bearings, and Suction Strainer of SS-304 (size as per pump

manufacturer recommendation), sole plate, Flex. pin-bush coupling, Hot dip

galvanised (HDG) bolts, nuts & washers, gaskets etc. complete as per IS and

SITC of an approved make, IE3 Efficiency Class, vertical flange-mounted, solid shaft,

squirrel cage induction motor. The motor shall conform to IS 12615:2018 and the

pump manufacturer's recommendations. It shall be suitable for VFD operation, 3-

Phase, 415V, 50Hz AC supply, and feature a TEFC enclosure with Class H insulation

(temperature rise limited to Class F). RTD sensors for winding and bearing

temperature protection, as well as a space heater, are required and shall be as per

the tender specifications.

Pump Capacity: 1740 m3/hr, (1W + 1S) (Type 1 - for 40 MLD WTP)

Bowl Head: 15 m,

Speed: 1500 RPM (max),

Minimum Acceptable Bowl Efficiency at Duty Point: 84 % &

Motor Rating: Minimum 110 kW (or higher as recommended by pump mfg).

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

1.2.1 Supply, Installation, Testing and Commissioning (SITC) of Vertical Turbine Pump of 2 Set 831850.00 Rupees Eight Lacs ThirtyOne Thousand Eight

following duty parameters & guaranteed efficiency of following MOC, having max.

Hundred Fifty Only

speed as mentioned below, suitable to couple with motor of specified rating

vertical flange mounted TEFC sq. cage induction motor, along with column and

bowl assembly, discharge head, base channel / Rolled Steel Joist etc. MOC: Impeller

& sealing rings- CF8M, Bowl & suction bell of CI FG 260 as per IS 210 with 2 % Ni,

Shaft with coupling - SS410, Column Pipe of M.S. ERW of min. 400 mm dia. & min.

8.0 mm thickness and each piece of 1.25 / 2.5 m long pipes and total length as per

actual site requirement and to achive min. submergence requirement, MS Base

plate, Thordon bearings, and Suction Strainer of SS-304 (size as per pump

manufacturer recommendation), sole plate, Flex. pin-bush coupling, Hot dip

galvanised (HDG) bolts, nuts & washers, gaskets etc. complete as per IS and

SITC of an approved make, IE3 Efficiency Class, vertical flange-mounted, solid shaft,

squirrel cage induction motor. The motor shall conform to IS 12615:2018 and the

pump manufacturer's recommendations. It shall be suitable for VFD operation, 3-

Phase, 415V, 50Hz AC supply, and feature a TEFC enclosure with Class H insulation

(temperature rise limited to Class F), as well as a space heater, are required and

shall be as per the tender specifications.

Pump Capacity: 870 m3/hr, (1W + 1S) (Type 2 - for 20 MLD WTP)

Bowl Head: 15 m,

Speed: 1500 RPM (max),

Minimum Acceptable Bowl Efficiency at Duty Point: 82 % &

Motor Rating: Minimum 55 kW (or higher as recommended by pump mfg).

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

2.1.1 SITC of double flanged CI / DI Electric Actuator operated Sluice 2 Nos. 221421.00 Rupees Two Lacs TwentyOne Thousand Four

Valve as per IS 14846, Electric Actuator complete with position Hundred TwentyOne Only

transmitter, PN 1.0 of following sizes with SS 304 seat rings, SS

Rising Spindle with all hot dipped galvanised hardwares, bolts, nuts

& washers, gaskets including all taxes, insurance, transportation,

etc. complete as per IS and Specification.

Size : 400 mm NB (At delivery of VT Pump - Type 2)

2.1.2 --- Item description as above --- 2 Nos. 361944.00 Rupees Three Lacs SixtyOne Thousand Nine

Size : 600 mm NB (At delivery of VT Pump - Type 1) Hundred FourtyFour Only

2.2.1 SITC of double flanged CI/DI Dual Plate Check Valve conforming to 2 Nos. 82266.00 Rupees EightyTwo Thousand Two Hundred

API 594, PN 1.0 with Cast Steel dual door, hinge pin & stop pin of SS SixtySix Only

304, springs of AISI 304 and seat of SS 304, along with all required

accessories, gaskets and hardwares,etc. and as per specification and

complete in all respect.

Size : 400 mm NB (At delivery of VT Pump - Type 2)

2.2.2 --- Item description as above --- 2 Nos. 217494.00 Rupees Two Lacs Seventeen Thousand Four

Size : 600 mm NB (At Del. of VT Pump - Type 2) Hundred NinetyFour Only

2.3.1 SITC of Electric Actuator operated Horizontal shaft CI Double 1 No. 841569.00 Rupees Eight Lacs FourtyOne Thousand Five

Flanged Butterfly Valve, conforming to IS 13095 / BS EN 593, PN 1.0 Hundred SixtyNine Only

with SS 304 renewable seat ring, indicator, gear box with bolts,

nuts & washers, gaskets, etc. as per specifications.

Size : 1200 mm NB (at Inlet line valve before FM)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

2.4.1 SITC of CI/ DI Tamper proof Flanged Air Valve with Isolation Sluice 1 No. 25759.00 Rupees TwentyFive Thousand Seven

Valve as per IS 14845 PN-1.0 & IS-14846 PN-1.0 respectively with Hundred FiftyNine Only

SS304 float, gun metal nozzle, complete hardware's, bolts, nuts &

washers, gaskets etc. as per IS and Specification.

Size: 150 mm NB - (At common Header line of Type 1 VT pump)

2.4.2 --- Item description as above --- 1 No. 16671.00 Rupees Sixteen Thousand Six Hundred

Size: 100 mm NB (At common Header line of Type 2 VT pump) SeventyOne Only

3.1.1 SITC of Flange ends Expansion Bellow (PN 1.0) as per EJMA 3 Nos. 16500.00 Rupees Sixteen Thousand Five Hundred Only

standards and as per specs. and complete in all respect.

Size : 400 mm NB (At delivery of VT Pump - Type 2, 1 No. at Flow

3.1.2 --- Item description as above --- 3 Nos. 29280.00 Rupees TwentyNine Thousand Two Hundred

Size : 600 mm NB (At delivery of VT Pump - Type 1, 1 No. at Flow Eighty Only

3.1.3 --- Item description as above --- 1 Nos. 111512.00 Rupees One Lacs Eleven Thousand Five

Size : 1200 mm NB (At Flow meter - inlet line) Hundred Twelve Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.1.1 MS PIPES & SPECIALS: 2 RMT 1979.00 Rupees One Thousand Nine Hundred

Supply, Gas cutting of pipe, Fabrication, welding, Installation, SeventyNine Only

testing and commissioning of MS pipe & Specials, reducer,

expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges

confirming to IS 6392-PN-1.0, fabricated from MS. plate with

necessary supports & anchoring. Pipe fabricated from MS plate.

(Excluding supply of flange) as per specs. and complete in all

Size : 168.3 mm OD X min. 6.3 mm Thk (for AV)

4.1.3 --- Item description as above --- 25 RMT 6096.41 Rupees Six Thousand NinetySix and Paise

Size : 406.4 mm OD X min. 8.0 mm Thk (for delivery of VT Pump - FourtyOne Only

Type 2 & header up to 20 MLD WTP)

4.1.4 --- Item description as above --- 150 RMT 7513.56 Rupees Seven Thousand Five Hundred

Size : 610 mm OD X min. 8.0 mm Thk (for delivery of VT Pump - Thirteen and Paise FiftySix Only

Type 1 & header up to 40 MLD WTP)

4.1.5 --- Item description as above --- 10 RMT 22327.00 Rupees TwentyTwo Thousand Three

Size : 1219 mm OD X min. 10.0 mm Thk (at inlet line) Hundred TwentySeven Only

4.2.1 Supply, Welding, Installation, Testing & Commissioning of MS flat 1 No. 800.00 Rupees Eight Hundred Only

machined faced flanges confirming to IS 6392 & drilled as per IS-

1538 with drilling off centre bolt holes and flange thickness as per

PN 1.0 including cutting & welding.

Size : 100 mm NB - Drilled (for Air Valve on Header Line - pump type

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.2.2 --- Item description as above --- 1 No. 1180.00 Rupees One Thousand One Hundred Eighty

Size : 150 mm NB - Drilled (for Air Valve on Header Line-pump type Only

4.2.3 --- Item description as above --- 2 Nos. 3540.00 Rupees Three Thousand Five Hundred Fourty

Size : 400 mm NB - Drilled (or actual VT Pump Del. - Type 2) Only

4.2.4 --- Item description as above --- 9 Nos. 3540.00 Rupees Three Thousand Five Hundred Fourty

Size : 400 mm NB- Drilled Only

4.2.5 --- Item description as above --- 2 Nos. 5670.00 Rupees Five Thousand Six Hundred Seventy

Size : 600 mm NB- Drilled (or actual VT Pump Del. - Type 1) Only

4.2.6 --- Item description as above --- 8 Nos. 5670.00 Rupees Five Thousand Six Hundred Seventy

Size : 600 mm NB- Drilled Only

4.2.7 --- Item description as above --- 1 No. 4940.00 Rupees Four Thousand Nine Hundred Fourty

Size : 400 mm NB- Drilled Blind Only

4.2.8 --- Item description as above --- 1 No. 9720.00 Rupees Nine Thousand Seven Hundred

Size : 600 mm NB- Drilled Blind Twenty Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.2.9 --- Item description as above --- 4 Nos. 17800.00 Rupees Seventeen Thousand Eight Hundred

Size : 1200 mm NB- Drilled Blind Only

4.3.1 Flanged Joints of Pipes, Fittings and Specials: 3 Nos. 1699.00 Rupees One Thousand Six Hundred

Supply, Installation, Making of Flanged CI / DI / MS / GI Pipes, NinetyNine Only

Fittings and Specials Joints with all jointing materials, rubber

packing, nut bolts, labour etc. complete the work in all respects.

Size: 400 mm dia.

4.3.2 --- Item description as above --- 3 Nos. 3217.00 Rupees Three Thousand Two Hundred

Size: 600 mm dia. Seventeen Only

4.4.1 G.I. PIPES & FITTINGS: 2 RMT 1026.00 Rupees One Thousand TwentySix Only

Supply, installation, connection with equipments as required,

testing and commissioning of GI pipe conforming to IS-1239, Heavy

Duty with tee, bend, coupling, etc. all required fittings for

connection complete with gaskets, hardware, and required

accessories as per IS & Specifications.

Size: 100 mm NB

4.5.1 Excavation for pipeline trenches for water supply, sewerage line, 440 Cu.m. 135.00 Rupees One Hundred ThirtyFive Only

manhole etc. all with shoring and struting if required as per

required gradient and line incl. all safety provisions using site rail

and stacking excavated stuff including up to all required lead

Cleaning the site etc. complete for all lifts and strata as specified.

a) 0-1.5 m depth

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.5.2 --- Item description as above --- 230 Cu.m. 148.00 Rupees One Hundred FourtyEight Only

b) 1.5-3 m depth

5.1.1 Providing, Supply of Structure Steel at site of work with freight, 3000 kg. 76.27 Rupees SeventySix and Paise TwentySeven

loading, unloading carting, etc. including all taxes and duties Only

complete such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (min. 8 mm

thickness) for cable trench etc. required for support structure of all

Electro-mechanical equipment, piping, etc. for support on floor /

wall / beam / brackets etc. as per tender and IS.

5.1.2 Labour Charges for lowering, laying, Fixing with fabrication various 3000 kg. 11.37 Rupees Eleven and Paise ThirtySix Only

size section of MS such as joints, channels, angles, Iron Rails,

ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench

etc Complete with two coats of red oxide and two coats of

approved colour shade of epoxy paint as per relevant IS and as per

6.1.1 SITC of Electric Actuator Gear operated C.I. Sluice Gate conforming 6 nos. 460790.00 Rupees Four Lacs Sixty Thousand Seven

to AWWA C 501 or IS : 13349 - 1992, Class - 2 with rising spindle, Hundred Ninety Only

single faced, wall thimble mounted, handwheel, flange back frame,

Spindle length as specified or to suit site condition, being suitable

for seating as well as unseating water head and complete in all

Size : 900 mm X 900 mm - approx. 4.0 m spindle length (at each

Screen chamber I/L & O/L) - Flush Bottom or suitable Closing

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

6.1.2 Item Description as per 6.1.1 and of following size complete in all 5 nos. 754420.00 Rupees Seven Lacs FiftyFour Thousand Four

respect. Hundred Twenty Only

Size :1200 mm X 1200 mm- approx. 6.3 m spindle length (at Suc. Pit

I/L, Sump I/L & interconnecting wall at Suc. pit) - Flush Bottom or

suitable Closing

6.1.3 Item Description as per 6.1.1 and of following size complete in all 1 no. 963240.00 Rupees Nine Lacs SixtyThree Thousand Two

respect. Hundred Fourty Only

Size :1400 mm X 1400 mm- approx. 3.5 m spindle length (at I/L

line) - Flush Bottom or suitable Closing

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

7.1.1 SITC of Box Type Manual mesh Screen having following size, made 4 set 316970.00 Rupees Three Lacs Sixteen Thousand Nine

of SS 304 material having round bars of size 10 mm dia. with clear Hundred Seventy Only

bar opening as specified here below, suitably welded in outer frame

of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher,

with intermediate support at required locations, complete as per

specs. & shall also including followings:

The screen shall be with SS perforated Screening Material Collection

Box at bottom end of Screen having size as specified, fabricated

from 3 mm thk. SS sheet, screen shall be suitable to slide complete

screen through rollers between existing guide channel of MCP

embedded/ fixed in wall on both sides of RCC wall up to top of

chamber with all necessary hardware, SS nuts, bolts & washers,

sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting

chain having intermediate link/chain of 200 mm dia. at every 1.5 m

distance with shackle, etc. complete in all respects and provided

with 1 set of cleaning rake with each screen complete as per

specification and complete in all respect.

Screen Size: 1400mm (W-or actual chamber width) x 1850mm (H) x

Screening Box size: 1400mm (W) x 300mm (H) x 300mm (D)

Opening: 50 mm x 50 mm sq. opening.

(w/o Guide channel & MS supporting structure)

Note: 1) Manual mesh Screen suitable for 1500 mm wide screen

chamber or to suit site requirement.

2) 1 No. Box Type Manual mesh Screen shall be store stand by.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

8.1.1 SITC of Single girder type E.O.T. crane with electrically operated 1 Set 800250.00 Rupees Eight Lacs Two Hundred Fifty Only

hoist, class II duty, geared travelling trolly with lift as specified here

below complete with long travel rail track (40 sq.mm. bar), moving

or cross girder, all three motions electrically operated by suitable

rating motor IP54, control panel, & down pendant control block,

brake, safety device, cables from motor to starter panel & other

required accessoaries & manufactured and tested as per IS-807, IS-

3938 & IS-3177, class-II, complete as per IS & Specifications.

Capacity: min. 7.5 Ton, (at Pump house - For VT Pump lifting)

Lift: 12.0 m or (or as per site req.)

Span: Approx. 8.8 m (or as per site req.)

Bay length: App. 30.0 m (or as per site)

Note: Minimum as specified capacity or higher as per requirement

such that EOT crane capacity is min.1.25 times of the pump /motor

OR single heaviest component to be lifted within pump house.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

8.2.1 SITC of Ele. Operated Chain Hoist & Ele. operated Trolley, suitable 1 Set 176240.00 Rupees One Lacs SeventySix Thousand Two

to operate on Mono Rail Girder having motorised motion, Hundred Fourty Only

manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II,

complete with brake, chain-gear, crane duty motors, safety device,

pendant push button, starter panel, cables from motor to starter

panel and all other required accessories like limit switches, power

supply system (Fastoon cable type), fasteners, epoxy painting, etc.

tested for over load as per IS and as per specifications, complete in

Capacity : 1.0 Ton. (for lifitng / lowering of Manual Screen)

'Lift : 8.5 m as mini. or as per site req.

Bay Length : 6.0 m

(w/o MONORAIL GIRDER & MS supporting structure)

9.1.1 PORTABLE DEWATERING / DESILTING PUMP 1 Set 192343.00 Rupees One Lacs NinetyTwo Thousand Three

Supply and testing of Subm. non clog Portable Dewatering Pumpset Hundred FourtyThree Only

with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose

pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS

lifting chain, 20m pair of cable for motor to starter panel, suitable

for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as

indicated here below, Switch-Starter panel with PMU suitable inter

lock for winding protection, moisture controller for fault detection

and auto stop facility, with buit-in level switch for dry run

protection and auto stop facility, 20 m suitable size power supply

cable to starter panel, GI/CI pump stool and other required

accessories for wet well.

Pump Capacity: 50 m3/hr,

Motor Rating: Min. 5.5 kW (or higher rating as reco. by pump

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

10.1.1 PVC FLEXIBLE HOSE PIPES (FLUSHING / CLEANING) 90 Rmt 34.50 Rupees ThirtyFour and Paise Fifty Only

Providing and supplying in standard length ISI mark rigid

unplasticised PVC pipes with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local and central

taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores and

including cost of jointing material etc. complete.

Size: 25 mm NB (Pipe length preferred in 30 mtr. Run)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

SCHEDULE OF QUANTITIES & RATES FOR SITC OF ELECTRICAL, MECHANICAL WORKS WITH 5 YEARS O&M FOR SYPHON AT SUGHAD, NARMADA MAIN CANAL OF GMC.

1.1 ELECTRICAL WORK: 1 Set 720845.00 Rupees Seven Lacs Twenty Thousand Eight

11kV OUTDOOR RING MAIN UNIT (RMU) Hundred FourtyFive Only

Supply, installation, testing & commissioning Outdoor type 11 KV,

Amps. 21 kA for 3 second SF6 type extensible and motorized 3 way

smart Ring Main Unit (RMU) complete with 3Nos. VCB with FRTU

and FPI as per IS.

(for common supply : 1 Incomer, 2 outgoing : 1 outgoing for existing

40MLD WTP, 1 outgoing for Proposed RWPH)

2.1 H.T. INDOOR SWITCH GEAR PANEL 1 Set 1328836.80 Rupees Thirteen Lacs TwentyEight Thousand

SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type, Horizontal Eight Hundred ThirtySix and Paise Eighty

draw out, Motorised spring charging mechanism, 3 breaker Vacuum Only

Circuit Breaker Panel (1 No. Incomer + 2 Nos.outgoing), with EC

grade copper busbars along with required Resin cast CT Dual

primary & secondary, Cl: 0.5/5P10, 15VA, Digital MFM with RS

with 3 Line Display, Class-0.5s and PT (dual secondary) Cl:0.5/3P,

min 200VA or higher for metering and protection, 110V DC power

pack for incoming & outgoing feeder, Annunciator, Hooter,

Indicating lamps, Numerical Protection relay

(Current & Voltage Based) with RS 485 with combined protection

for 3O/C+1E/F, S/C, Under & Over Voltage, Transformer Protection

Aux. relay etc. High speed tripping relay, Trip ckt supervision relay,

Fuse failure relay, Digital Power factor meter for incoming &

outgoing feeder, Ammeter, Voltmeter (Only I/C), A/M switch

suitable for PLC/SCADA etc. complete in all respects as per IS,

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

2.2 SITC of H.V. CABLES 200 Mtr. 2217.96 Rupees Two Thousand Two Hundred

11 kV (E), 3C x 240 sq.mm., Aluminium, extruded innersheath, Seventeen and Paise NinetySix Only

Armoured, XLPE , H.V Cable as per IS 7098 (part 2) and Tech.

(existing Client DP structure to RMU, RMU to existing HT panel of

WTP plant, RMU to Proposed HT panel of RWPH, Proposed HT panel

(RWPH) to proposed Tansformer 1 & 2)

2.3(a) SITC of the Indoor Heat shrinkable Termination: 9 Nos. 4798.00 Rupees Four Thousand Seven Hundred

Supply of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x NinetyEight Only

240 sq.mm. XLPE armoured cable.

2.3(b) SITC of the Outdoor Heat shrinkable Termination: 1 Nos. 6763.00 Rupees Six Thousand Seven Hundred

Supply of Outdoor H.T. cable end terminations Kit for 11 kV (E), 3C SixtyThree Only

x 240 sq.mm. XLPE armoured cable.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

3.1 DISTRIBUTION TRANSFORMER 2 Nos. 1145181.00 Rupees Eleven Lacs FourtyFive Thousand

SITC of 630kVA, 11/0.433 kV, Oil filled, Outdoor Transformer One Hundred EightyOne Only

continuously rated, 3-phase, 50 Hz, OFF Load Tap Changer, OCTC,

ONAN cooled, copper double wound core type, vector group Dyn11,

Delta(HT)/Star(LT), Oil immersed winding with temperature rise in

oil / winding 40/45 deg.C above design temperature with neutral

brought out to connect to separate earthing including Terminal

arrangement bushing / cable Box on HT side & LT side(LT cable shall

be suitable for min 4R X 3.5C X 300 Sq.mm A2XFY cable), first fill of

oil along with Fittings & accessories as per Energy efficiency Level-2

of IS:1180 (Part-1):2021 and its latest ammendments and as per

Tender Specification.

Note: Transformer shall be suitable for parallel operation.

Minimum requirement shall be as below:

Both transformer shall have " Identical X/R ratio, phase angle shift,

polarity, phase sequence, frequency, position of tap changer.

Turns ratio & voltage ratio".

3.2 (a) Supply and levelling of Switch yard & transformer yard using gravel, 75 Sq.m. 340.00 Rupees Three Hundred Fourty Only

fine sand and other required filing material, enmarked for the

Switchyard & Transformer yard including removing of trees or

boulders etc. if any. The general level of the yard shall be at a

convenient level for movement of man and material and it should

match with FGL and as per Specification and Drg.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

3.2 (b) Supply and Installation of GI Chain link fencing frames with L 35 RMt. 1060.00 Rupees One Thousand Sixty Only

angle/Channel post around Transformer yard etc. as per

Specification and Drg.

3.2 (c) SITC of 3.0 mtr wide gate with GI chain link as per Specification and 2 Nos. 10660.00 Rupees Ten Thousand Six Hundred Sixty Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.1 LOW VOLTAGE (LT) PANEL BOARD (PMCC) : 1 Set 2924000.00 Rupees TwentyNine Lacs TwentyFour

SITC of PMCC Panel (50kA), compartmentalized, Floor mounted, Thousand Only

operating height maximum 1800/1900 mm, Extensible on both ends,

suitable for Manual & Auto operation -Local & through PLC/SCADA

operation as per site conditions complete in all respects as per Tender SLD

/ Specification / IS and including following as minimum:

(1) INCOMER 1&2: FP, 1000A, 50 KA Microprocessor EDO ACB LSIG with

inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS,

Digital Ammeter with ASS, Resin Cast CT-Cl : 0.5,10VA, Digital MFM with

RS 485 with 3 Line Display Cl. 0.5, Breaker Control Switch (TNC), A/M

switch, Indicating lamps, Push bottons etc,. with electrical & mechanical

interlocking between Incomers and buscoupler.

(1.1) Surge protection device, 3P + N, Type 2 for lightning/surge

protection. Load sensing CT in Incomer & Busbar for APFC Panel, Cl.-0.5.

Constant voltage/control voltage transformer 1500VA, 415V/230V AC,

with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power contactor.

(2) BUS-COUPLER: One no. FP 1000A ACB (same as per Incomer)

(3) 1250A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault

level and Temperature rise with Current density 0.8A/Sq.mm)

(4) DG INCOMER 3 : FP, 1250A, 50 KA Microprocessor EDO ACB LSIG with

inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS,

Digital Ammeter with ASS, Resin Cast CT-Cl : 0.5,10VA, Digital MFM with

RS 485 with 3 Line Display Cl. 0.5, Breaker Control Switch (TNC), A/M

switch, Indicating lamps, Push bottons etc,. with electrical & mechanical

interlocking between Mains and DG set.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

(5) TRANSFORMER FIXED COMPENSATION FEEDER (20 kVAR): 2 rate incl in above price

Each comprising of 63A FP Thermal Magnetic MCCB, Ind. Lamp,

with Capacitor duty contactor, ON Delay timer, individual

MCCB/MCB as per Tender SLD.

(6) 100 KVAR APFC POWER FEEDER: 2 NOS :

Feeder comprising of 250A TPN TM MCCB, 50kA, Digital Ammeter

with ASS, CT, Indicating lamps, etc.complete in all respects.

(7) 400A POWER FEEDER FOR FUTURE 20MLD WTP : 2 NOS :

Feeder comprising of 400A TPN Microprocessor MCCB LSIG, 50kA,

Digital MFM with RS-485 Cl. 0.5, CT, Indicating lamps, etc.complete

in all respects.

(8) SOFT STARTER FOR 110 KW MOTOR (VT PUMP) : 2 NOS :

Each feeder comprising of Soft Starter with Internal/External bypass

contactor for 110 kW Motor or higher as per pump manufacturer

reco. with soft starter rating minimum (225A @ 50deg C) with

suitable derating with detachable type door mounted display key

pad and with 320A TPN MP MCCB (LSIG), 300A, AC3 duty Line

contactor, Semi conductor fuse, MFM with RS-485, Resin Cast CT Cl:

0.5, SPP, Cooling fan, Space heater, Minimum Eight-channel

temprature scanner with RS-485, A/M, L/R switch, ON, OFF, TRIP

Indication &(Start & E-Stop) pushbutton etc.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

(9) STAR-DELTA STARTER FOR 55 KW MOTOR(VT PUMP) : 2 NOS : rate incl in above price

Each feeder comprising of 55 KW or higher as per pump

manufacturer recommendation Star-delta starter with 200A TPN

Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C

protection, 95A AC3 duty contactors (3 Nos), O/L Relay, star-delta

timer, MFM with RS-485, Resin Cast CT Cl: 0.5, MPR with RS-485,

CBCT, SPP,Space heater, A/M, L/R switch, ON, OFF, TRIP Indication

& Start, E-Stop & Reset pushbutton etc. for S/D starter. complete in

(10) 63A TPN TM MCCB FEEDER : 6 NOS. (1 no. for EOT crane at

PH., 2 nos. for PDB, 1no. for De-watering pump panel, 2nos. Spare)

Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB,

with indicating lamp etc.

(11) 32A TPN TM MCCB FEEDER : 2 NOS. (2 nos. Spare)

Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB,

with indicating lamp etc.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

(12) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 SETS: rate incl in above price

Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating

a) 6 nos. 32A 'C' curve 4P MCB feeders (1 no. for Indoor LDB, 1 no.

for ICP/PLC Panel, 1no. for DG charging, 1no. for DG sensing, 2 nos.

b) 1 no. 32A 'C' curve 4P MCB with Time switch,32A contactor

4P,ON lamp feeders (for Outdoor LDB)

c) 4 nos. 16A DP MCB feeders (For HT Panel, 2 nos. for X'mer

marshaling box, 1 no. Spare)

(13) Multiplication relay as required for dry run protection of

NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection

with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary

handle, Terminal spreader, Auxiliary Change over contact and trip

contact as required.

2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with

3) For Actuator LCS (PBS) shall be provide potential free contact for

(open,close,trip & L/R ) indication and terminal for Open,close and

stop command because actautor shall be operator from PLC Panel

also in addition to LCS (PBS).

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.2 SITC of 100 KVAR at 415V, APFC Panel,compartmentalised, Floor mounted, 2 Sets 340875.00 Rupees Three Lacs Fourty Thousand Eight

extensible type on both sides with Horizontal bus bar arrangement as per site

Hundred SeventyFive Only

requirement & complete in all respects as per SLD / Specification / IS and including

following as minimum:

1.1 250A, TPN, 50 KA TM MCCB with Digital Voltmeter with VSS, Digital Ammeter

with ASS, Resin Cast CT- Cl: 1.0, 10VA, A/M switch, ON, Trip, Auto & Manual

Indication lamps, Push buttons etc.

1.2 Microprocessor based APFC Relay,144sq.mm, 12 STEP with RS 485 with

minimum operating current 10mA.

2. OUTGOING CAPACITOR FEEDER:

All Capacitor feeder of following rating comprising of TPN MCCB/MCB with

Capacitor duty contactor, Heavy duty MPP / gas filled capacitor unit, ON Delay

timer, A/M Switch, Start, E-Stop Push button, ON, Auto/Manual Indication lamps

etc. as per Tender SLD & Specification.

2.1 20 KVAR FEEDER WITH 63A MCCB, ON & TRIP Indication: 3 NOS

2.2 10 KVAR FEEDER WITH 32A MCCB, ON & TRIP Indication: 3 NOS

2.3 5 KVAR FEEDER WITH 16A MCB FEEDER: 1 NO

2.4 2 KVAR FEEDER WITH 16A MCB FEEDER: 2 NOS

2.5 1 KVAR FEEDER WITH 16A MCB FEEDER: 1 NO

2.6.Two nos. Vacant feeder suitable for 1-20KVAr and 1-10KVAr to be provided.

NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller

/ Blade / Vanes of Minimum2nos. or higher as required at the top of the panel

with canopy/hood.

2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.3 SITC of Lighting Distribution Board (LDB) as under: 2 Nos. 7568.94 Rupees Seven Thousand Five Hundred

SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for SixtyEight and Paise NinetyFour Only

Indoor Lighting & Outdoor Lighting Suitable to house :

Incoming: 32A FP, ELMCB (30mA)

Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)

4.4 SITC of Aux-Power Distribution Board (PDB) as under: 2 Nos. 11762.46 Rupees Eleven Thousand Seven Hundred

3 Phase 4 Wire TPN, 12way Pre-wired-MOG / MOV PDB for SixtyTwo and Paise FourtySix Only

Auxiliary accessories Load power supply (1no. for EOT with ECH at

manual screen, 1 no. MOG at Inlet Pipe, 1 no. MOG At Inlet

Chamber, 3nos. For MOG At Screen Inlet, 3nos. For MOG At Screen

outlet, 2nos. For MOG At Sump Inlet, 2nos. For suction pit inlet,

1no. For suction pit inter-compartment, 4 nos. for MOV At Pump

Delivery, WR-DB, Aux. load & Rest spare)

Incoming: 63A 4P, MCB 'C' Curve

Outgoing: 12 nos. 32A 4P MCB 'C' Curve

4.5 SITC of LCS pushbutton station ON & OFF (E-stop) set complete 4 Nos. 2008.47 Rupees Two Thousand Eight and Paise

with Enclosure, necessary mounting/ fixing arrangement on wall / FourtySeven Only

pipe support etc. to be installed near motors for remote operation,

etc. as per IS and specifications. (including structural steel) (For

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

5.1 LOW VOLTAGE (LT) CABLES 1050 Mtr. 1400.87 Rupees One Thousand Four Hundred and

Supply, laying , testing and commissioning of 1.1 kV, Paise EightySeven Only

A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded

conductor, Extruded inner sheath cables as per specification & IS.

The cable when laid outside the building shall be laid underground

in trench with brick & sand protection/in DWC pipes as per

specified method and shall be laid in prepared trench/ on cable tray

when laid inside the building.

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (4 runs each for

Transformer-1 & 2 to PMCC panel incomer-1 &2, 5 runs each for DG

set to AMF panel, 5 runs for AMF panel to PMCC panel incomer)

5.2 SITC of 3.5C x 150 sq. mm. A2XFY(X) Cable (1 run each for PMCC 60 Mtr. 1161.50 Rupees One Thousand One Hundred

panel to APFC-1 & APFC-2 Panel) SixtyOne and Paise Fifty Only

5.3 SITC of 3C x 240 sq. mm. A2XFY(X) Cable (1 run for PMCC Panel to 2 100 Mtr. 234.32 Rupees Two Hundred ThirtyFour and Paise

nos. 110kW VT Pump motor) ThirtyTwo Only

5.4 SITC of 3C x 25 sq. mm. A2XFY(X) Cable (2 run for PMCC Panel to 2 150 Mtr. 234.32 Rupees Two Hundred ThirtyFour and Paise

nos. 55kW VT Pump motor) ThirtyTwo Only

5.5 SITC of 4C x 10 sq. mm. A2XFY (X) Cable (2nos. for PDB, 1 no. for 200 Mtr. 138.37 Rupees One Hundred ThirtyEight and Paise

EOT crane at PH., 1no. for Dewatering pump panel) ThirtySeven Only

5.6 SITC of 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. Indoor LDB, 1 no. 150 Mtr. 124.23 Rupees One Hundred TwentyFour and Paise

for Outdoor LDB, 2nos. WR-DB ) TwentyThree Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

5.7 SITC of 4C x 2.5 sq. mm. 2XWY(X) Cable (1no. for EOT with ECH at 1000 Mtr. 269.67 Rupees Two Hundred SixtyNine and Paise

manual screen, 1 no. MOG at Inlet Pipe, 1 no. MOG At Inlet SixtySeven Only

Chamber, 3nos. For MOG At Screen Inlet, 3nos. For MOG At Screen

outlet, 2nos. For MOG At Sump Inlet, 2nos. For suction pit inlet,

1no. For suction pit inter-compartment, 4 nos. for MOV At Pump

Delivery, 1 no. ICP/PLC Panel & for 6 nos. street light, 1no. for DG

charging & 1no. for dg sensing)

5.8 SITC of 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For 2 nos. Tr. 150 Mtr. 176.75 Rupees One Hundred SeventySix and Paise

Marshalling Box, 2 nos. APFC CT) SeventyFive Only

5.9 SITC of 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump-Motor LCS) 150 Mtr. 220.00 Rupees Two Hundred Twenty Only

5.10 SITC of 10C x 2.5 sq.mm. 2XWY(X) Cable (2 Run Tr. to HT Panel 150 Mtr. 510.00 Rupees Five Hundred Ten Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

6.1 CABLE END TERMINATION AND CONNECTION: 36 Nos. 976.00 Rupees Nine Hundred SeventySix Only

SITC of Double compression Ni-Plated brass cable glands and

crimping type Bimetallic lugs / sockets with necessary tools and

equipment's as specified in specifications and IS. The glands and

lugs / sockets shall be suitable for cable size and type mentioned

below & as per specifications.

1) Earthing the glands and armouring with earthing clamp and

jumper and also connecting to common earth bar.

2) The job also includes, if necessary, supply & fixing of extension

busbar of same material on MCCB or panel board terminal /

connector to connect more than one no. of parallel cables or to

connect higher size cable to lower size unit. The job also includes

earthing the glands and armour of the cable with common earth bar

or flexible copper mesh.(Cable termination qty. shall be as per site

SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (4 runs each for

Transformer-1 & 2 to PMCC panel incomer-1 &2, 5 runs each for DG

set to AMF panel, 5 runs for AMF panel to PMCC panel incomer)

6.2 Same as above but, 3.5C x 150 sq. mm. A2XFY(X) Cable (1 run each 4 Nos. 838.00 Rupees Eight Hundred ThirtyEight Only

for PMCC panel to APFC-1 & APFC-2 Panel)

6.3 Same as above but, 3C x 240 sq. mm. A2XFY(X) Cable (1 run for 4 Nos. 255.00 Rupees Two Hundred FiftyFive Only

PMCC Panel to 2 nos. 110kW VT Pump motor)

6.4 Same as above but, 3C x 25 sq. mm. A2XFY(X) Cable (2 runs for 8 Nos. 255.00 Rupees Two Hundred FiftyFive Only

PMCC Panel to 2 nos. 55kW VT Pump motor)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

6.5 Same as above but, 4C x 10 sq. mm. A2XFY (X) Cable (2nos. for 8 Nos. 128.00 Rupees One Hundred TwentyEight Only

PDB, 1 no. for EOT crane at PH., 1no. for Dewatering pump panel)

6.6 Same as above but, 4C x 6 sq. mm. A2XFY (X) Cable (For 1 no. 8 Nos. 111.00 Rupees One Hundred Eleven Only

Indoor LDB, 1 no. for Outdoor LDB, 2nos. WR-DB )

6.7 Same as above but, 4C x 2.5 sq. mm. 2XWY(X) Cable (1no. for EOT 54 Nos. 65.65 Rupees SixtyFive and Paise SixtyFive Only

with ECH at manual screen, 1 no. MOG at Inlet Pipe, 1 no. MOG At

Inlet Chamber, 3nos. For MOG At Screen Inlet, 3nos. For MOG At

Screen outlet, 2nos. For MOG At Sump Inlet, 2nos. For suction pit

inlet, 1no. For suction pit inter-compartment, 4 nos. for MOV At

Pump Delivery, 1 no. ICP/PLC Panel & for 6 nos. street light, 1no. for

DG charging & 1no. for dg sensing)

6.8 Same as above but, 2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable 8 Nos. 49.49 Rupees FourtyNine and Paise FourtyNine

(For 2 nos. Tr. Marshalling Box, 2 nos. APFC CT) Only

6.9 Same as above but, 5C x 2.5 sq.mm. 2XWY(X) Cable (For Pump- 8 Nos. 180.00 Rupees One Hundred Eighty Only

6.10 Same as above but, 10C x 2.5 sq.mm. 2XWY(X) Cable (2 Run Tr. to 8 Nos. 240.00 Rupees Two Hundred Fourty Only

HT Panel control cable)

7.1 CABLE TRAY 150 Mtr. 694.88 Rupees Six Hundred NinetyFour and Paise

SITC of G.I. (hot dip galvanised )Ladder type medium duty (2mm EightyEight Only

thick) Cable Tray with necessary bends, tees, reducers, covers and

clamps for fixing. All material shall be Hot dip galvanised. All

hardware shall be Electro-galvanized/ SS 304 complete in all

respects as per Specification. And including all accessories.

600 x 100 mm - Ladder type

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

7.2 300 x 100 mm - Ladder type 300 Mtr. 556.51 Rupees Five Hundred FiftySix and Paise

7.3 150 x 50 mm - Ladder type 350 Mtr. 278.76 Rupees Two Hundred SeventyEight and Paise

SeventySix Only

7.4 Supply, laying and erection of 125 mm (ID) approved make Double 200 Mtr. 325.00 Rupees Three Hundred TwentyFive Only

Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-

14930 II) with necessary connecting accessoies of same material at

required depth for laying of cable below ground / road surface for

enclosing cable and back filling the same to make ground as per

original. (For HT cable).

7.5 Supply, laying and erection of 75 mm ID approved make Double 250 Mtr. 144.00 Rupees One Hundred FourtyFour Only

Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-

14930 II) with necessary connecting accessoies of same material at

required depth for laying of cable below ground / road surface for

enclosing cable and back filling the same to make ground as per

original. (LT cable etc)

7.6 Making Trench/ excavation in soft soil of suitable width and of 500 Mtr. 46.46 Rupees FourtySix and Paise FourtySix Only

depth (minimum 750mm depth (LT) & 1000mm for HT) for laying

cable/ DWC pipe and back filling the same and making the surface

as normal ground as per IS & Ternder Specification/Drg. (For laying

of HT/LT cable)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

7.7 Cable Protection/ Covering in Trench: Cable Covering with second 100 Mtr. 134.33 Rupees One Hundred ThirtyFour and Paise

class bricks or cement tiles laid cover the cable (top) & also on both ThirtyThree Only

side with sand bedding/cusioning of 75mm.& covering of 150mm

Layer of sand above cable (16 bricks per meter.) as per IS & Tender

Drg/ Specification. (For HT/LT cable protection) complete in all

respects as instructed by EIC.

8.1 CHEMICAL EARTHING SYSTEM 12 Set 10593.89 Rupees Ten Thousand Five Hundred

SITC of Maintenance free chemical earthing (copper) with earthpit NinetyThree and Paise EightyNine Only

of minimum bore size dia. 225mm Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec.

made of corrosion free Pipes having Outer pipe dia of 48 mm

having 250 Micron copper plating, Inner corrosion free Hot dip

galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat

strip type connection terminal 14mm dia with constant ohmic value

surrounded by highly conductive corrosion resistant chemical

compound with high charge dissipation suitable for electrical

installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of

Back filling compound.. (2 nos. RMU, 2 nos. Each for neutral of Tr.-1

& 2, 2 nos. Each for DG set, 2nos. for HT Panel, 2 nos. for ICP

NOTE: Earthing Resistance value & date shall be painted on the

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

8.2 SITC of Maintenance free chemical earthing with earthpit of 14 Set 7095.25 Rupees Seven Thousand NinetyFive and

minimum bore size dia. 225mm Safe Earthing Electrode consisting Paise TwentyFive Only

Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of

corrosion free Hot dip Galvanised (min 150 Microns) Pipes having

Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised

(80 to 100 micron) pipe dia of 26 mm with copper flat strip type

connection terminal 14mm dia with constant ohmic value

surrounded by highly conductive corrosion resistant chemical

compound with high charge dissipation suitable for electrical

installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back

filling compound. (2 nos. Each for Tr.1 & Tr.2 Body, 2 nos. Each for

DG set Body, 2nos. for LT Panel, 2nos. for motor & 4nos. for grid

earthing & all elect. Equipments)

NOTE: Earthing Resistance value & date shall be painted on the

8.3(a) SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip 1716 Kg. 77.77 Rupees SeventySeven and Paise

galvanized GI Strip including supply & fixing using GI spacers, SeventySeven Only

saddles when laid inside the building and inclusive of excavation &

refilling of earth when laid outside the building & interconnection

with earth pit & all electro-mechanical equipments.

(50X8 G.I Strip wt.3.12 kg/m, 3.12x550Mt.=1716kg.)

8.3(b) Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as 120 Kg. 77.77 Rupees SeventySeven and Paise

required, HOT dip galvanized GI Strip including supply & fixing using SeventySeven Only

GI spacers, saddles when laid inside the building and inclusive of

excavation & refilling of earth when laid outside the building &

interconnection with earth pit & all electro-mechanical equipments.

(25X3 G.I Strip, 0.6 Kg/m, 0.6x200Mt.=120Kg.)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

8.3(c) Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper 38.05 Kg. 794.87 Rupees Seven Hundred NinetyFour and Paise

Strip including supply & fixing of bolts, saddles when laid inside the EightySeven Only

building and inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit & PLC Panel

(25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 50 mtr.=38.05Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

joint/welding. (For PLC Panel to Earthing)

8.3(d) Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper 282 Kg. 794.87 Rupees Seven Hundred NinetyFour and Paise

Strip including supply & fixing of bolts, saddles when laid inside the EightySeven Only

building and inclusive of excavation & refilling of earth when laid

outside the building & interconnection with earth pit & Tr. nutral.

(40X6 Cu. Strip, 1.88 Kg/m, 1.88 x 150mtr.=282Kg.)

Copper Bolt,Nuts ,Washers shall be used for Connecting Earth

electrode to individual eqp. Bitumen shall be used at the place of

8.3(e) SITC of 8 SWG HOT Dip Galvanized iron strip wire (For LDB, PDB, 56.65 Kg. 77.77 Rupees SeventySeven and Paise

LCS, etc.) SeventySeven Only

(8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 550Mt.=56.65)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

9.1 INTERNAL WIRING 250 Mtr. 78.78 Rupees SeventyEight and Paise SeventyEight

SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC Only

insulated ISI marked flexible stranded copper conductor wires with

medium class min. 25mm. dia. Rigid PVC pipe and accessories to be

erected concealed in / to be run on surface / wall / ceiling with

following sizes as mentioned below. The unit rate wirings shall be

with connector, PVC junction box, wires, holder, ceiling rose, angle

holder, switch, sockets, switch board, brass chromium / cadmium

plated machine screws, phase and neutral wires, green Earth

continuity wires etc. as required to complete wiring from LDB panel

to the final outlet termination points. The wiring shall be as per

IS:732, IS:4648 and as per tender specification / IS.

(a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

9.2 As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as 300 Mtr. 96.96 Rupees NinetySix and Paise NinetySix Only

per tender specification & IS.

9.3 As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as 300 Mtr. 86.86 Rupees EightySix and Paise EightySix Only

per tender specification & IS.

9.4 As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as 250 Mtr. 120.19 Rupees One Hundred Twenty and Paise

per tender specification & IS. Nineteen Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

9.5 SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 71 Nos. 329.26 Rupees Three Hundred TwentyNine and

1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI Paise TwentySix Only

marked 1.1 kv grade FRLS PVC insulated multistrand copper wires

pipe to be erected concealed in flushed on wall / ceiling, complete

with 6A Tissino Type ISI marked flush type switch / bell push &

accessories erected on metal / PVC Box covered with 3 mm thick PC

(Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling

Rose / H. D. connector as directed with medium class Rigid PVC pipe

9.6 SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size 5 Nos. 290.88 Rupees Two Hundred Ninety and Paise

wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 EightyEight Only

KV grade FRLS PVC insulated multistrand copper wires with medium

class Rigid PVC pipe and accessories to be erected on wall / ceiling,

complete with ISI marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

(1no. AMC HT Room, 2 nos. at LT Room, 2 nos. at PH.)

9.7 SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size 5 Nos. 570.65 Rupees Five Hundred Seventy and Paise

wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 SixtyFive Only

KV grade FRLS PVC insulated multistrand copper wires with medium

class Rigid PVC pipe and accessories to be erected on wall / ceiling,

complete with ISI marked 3 / 5 Pin socket and tissino type switch

erected with earth continuity connection erected on Metal / PVC

box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet.

(1no. AMC HT Room, 2 nos. at LT Room, 2 nos. at PH.)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

9.8 SITC of Single Phase 20A 3 Pin Matal clad Industrial Type Socket 5 Nos. 820.00 Rupees Eight Hundred Twenty Only

with plug top and 20A SPMCB, suitable for flush mounting, in

SWG MS box of suitable size and covered with 3 mm thick electrical

grade hylam sheet or eqivalent ISI marked Electrical grade bakelite

sheet and earthing with 2.5 sq.mm insulated copper wire run inside

the conduit including interconnections etc. complete as required.

(1no. AMC HT Room, 2 nos. at LT Room, 2 nos. at PH.)

9.9 SITC of One 300/380 mm dia. Ex fan 16A independent Plug point 10 Nos. 570.65 Rupees Five Hundred Seventy and Paise

near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire SixtyFive Only

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires with medium class Rigid PVC

pipe and accessories to be erected on wall / ceiling, complete with

ISI marked 3Pin socket and tissino type switch erected with earth

continuity connection erected on Metal / PVC box covered with

mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall be near

Ex.Fan.(4nos. for PH & 6nos. for LT Room)

9.10 SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, 10 Nos. 3082.52 Rupees Three Thousand EightyTwo and Paise

having double ball bearing, M.S.blades, mounting frame, forearms, FiftyTwo Only

suitable to operate on 230V,50 HZ AC supply conforming to IS:

2312.Fan shall be painted with epoxy grey colour controlled by one

6 A flush type switch on board and 6A plug point near Ex. fan.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

9.11 SITC of Sheets steel powder coated weather proof enclosure with 4 Nos. 770.63 Rupees Seven Hundred Seventy and Paise

One no. 32A, 415V 4P MCB for Motor & Inductive load (C Curve) SixtyThree Only

having 10 KA breaking capacity & confirms to IS:

(For 1 no. for EOT Crane P.H., 1no. EOT with ECH at Screen, 2nos.

10.1 LED LIGHT FIXTURES & LIGHTING: 35 Nos. 589.84 Rupees Five Hundred EightyNine and Paise

SITC of Indoor wall mounting 20Watt or up to 25% higher wattage EightyFour Only

LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA polyester powder coated and high U.V. & corrosion

resistance with diffuser and/or Polycarbonate optics with company

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

(Each fitting required LM-79 & LM-80 Certificates)

Tube Light with integral / non-integral driver, Surge-4KV,IP-20,

(For 3 nos. HT Room, 18 nos. LT Room, 14nos. Pump House)

10.2 Item description as per Sr. No. 8.1.1 SITC of 7 watts LED Lamps 5 Nos. 220.18 Rupees Two Hundred Twenty and Paise

integral type,cool white with PC diffuser suitable for B22 LAMP Eighteen Only

holder (For 1no. HT Room, 2 nos. LT Room, 2nos. PH.).

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

10.3 1200mm sweep ceiling fan, capacitor type, having double ball 4 Set 1596.81 Rupees One Thousand Five Hundred

bearing 450mm down rod, canopies, shackle, rubber bush, blades, NinetySix and Paise EightyOne Only

electronic speed regulator, suitable to operate on 230V,50Hz AC

supply conforming to IS: 374/1979.Fan shall be painted with white

10.4 SITC of 40W LED Surface / Wall mounted LED Flood Light fittings 15 Nos. 5194.43 Rupees Five Thousand One Hundred

with High power White LEDs wattage of 1Watt and above NinetyFour and Paise FourtyThree Only

assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses with company

mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Indoor use: ( Pump House)

10.5 SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long 27 Nos. 558.53 Rupees Five Hundred FiftyEight and Paise

duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, FiftyThree Only

erected on wall or corner for mounting luminaire with necessary

hardware materials duly painted for wall mounting indoor flood

light fixtures on Wall of Buildings & post top lantern.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

11.1 EXTERNAL LIGHTING (Flood LIGHT): 12 Nos. 6088.28 Rupees Six Thousand EightyEight and Paise

SITC of 70W LED Wall mounted LED Flood Light fittings with High TwentyEight Only

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company mark/name engraved

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

(IP-65), Surge -4KV Cat-III

For Outdoor use: (area lighting)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

12.1 EXTERNAL LIGHTING (STREET LIGHT): 6 Nos. 10688.83 Rupees Ten Thousand Six Hundred

SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long EightyEight and Paise EightyThree Only

with single arm & M.S.base plate with pipe cap and over hung 1.5 m

long having dia to suit the socket of 240V LED street light fixtures.

Street light pole unit rate shall be with (i) IP 65 SMC box of size

x 15 x 15 cms. with MCB & terminal strip inside the box with

hinged/sliding door (ii)50mm dia, B class GI pipe bracket

min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp

of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty

MS pipe of 4.2 cms. Out side dia complete with suitable sleeve

tubing 45 cms. long of required size of pole top etc. and having

spread of 1.5.mtr. length with 110 deg.(v) Complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium

/ PU paint for Pole,Arm, pipe etc.

12.2 SITC of 70W LED Street light fittings with High power White LEDs 6 Nos. 5976.17 Rupees Five Thousand Nine Hundred

wattage of 1Watt and above assembled on single MCPCB, efficiency SeventySix and Paise Seventeen Only

more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K

Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED

driver efficiency > 85 %.

( Each fittings required LM-79 & LM-80 certificates)

Street Light (IP-65), Surge -4KV, 70 watt Cat-III

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

12.3 SITC of M-20 / 1:2:4 cement concrete foundation for Street light 6 Nos. 1292.80 Rupees One Thousand Two Hundred

pole & 70 % PCC from bottom including excavation for the pole of NinetyTwo and Paise Eighty Only

size 60 x 60 x 120 cms. Deep in below ground level with plinth of

cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with

necessary curing and finishing in approved manner.

13.1 DIESEL GENERATOR SET (100% Working Load of Proposed load & 1 Set 8261480.00 Rupees EightyTwo Lacs SixtyOne Thousand

20MLD WTP for future) Four Hundred Eighty Only

Supply, laying , testing and commissioning (SITC) of 750 KVA (CPCB-

IV+) at 415 V, 50 Hz, 3 Phase, 4 wire Prime powerrating Diesel

Generating Set at design temperature at 40°C and 0.8 PF,complete

with necessary controls and safety devices confirming to relevent

ISS/BSS with latest amendements. Diesel Engine shall be suitable

for continuous operation of generator set duty inclusive of fly

wheel, air cleaner, radiator. fan with guard, fuel pump, fuel filter,

Electronic governor, auto main fail electrical starting starter system,

12V battery, off line battery charger, Advanced digital controller,

voltage regulator, instrument panel, Hospital Grade type Exhaust

silencer, suitable capacity fuel tank, protections against low

lubrication oil pressure, high water temperature.

Alternator shall be 415V, 3 phase, 50 Hz, 4 wire, 0.8 power factor,

Insulation Class-H, self regulated, brushless type, drip proof

confirming to IS:4722 with latest amendments.

The engine and alternator shall be coupled over a sturdy common

base frame. Floor mounted,dust & vermin proof, indoor type, dry

type air filter etc. and complete in all respect as required.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

13.2 Supply, laying ,testing and commissioning of AMF panel suitable for 1 Set 950910.00 Rupees Nine Lacs Fifty Thousand Nine

750KVA Rating for 3 phase, 415V, AC diesel generating sets Hundred Ten Only

complete scope as detailed below:

Panel shall be Floor mounted, dust & vermin proof, indoor type

Panel shall be consisting of rating of minimum 1250A MP EDO ACB

with LSIG Protection or higher, Electronic AMF cum Synchronizing

Logic relay (Nb2 or Equivalent) with minimum functions, 3Line

Display MFM, digital voltmeter, Ammeter, 8 channel temprature

scanner with RS-485 communication port, Power factor, frequency,

hour meter, Emergency Stop PB, CTs, with Indication, Alaram & Trip

Annunciation, Selector switch, other accessories etc. as complete in

all respect as required as per IS / Specifications.

14.1 SAFETY ACCESSORIES 9 Nos. 8671.86 Rupees Eight Thousand Six Hundred

SITC of following safety accessories complete with necessary fixing SeventyOne and Paise EightySix Only

brackets, other accessories and tools etc. as required to complete

Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg

capacity with necessary clamps made from 50 x 6 mm M.S. Flat with

nut & bolts grouted in wall complete.

(For 1no. RMU, 2 nos. X'mer-1 & 2, 1 no. HT Room, 2 nos. for LT

Room, 2 nos. for PH., 1no. at DG set)

14.2 Supplying of standard first AID box with antiseptic cream, medicine 3 Nos. 299.97 Rupees Two Hundred NinetyNine and Paise

for use on wounds due burn, crepe bandage, guage bandage, NinetySeven Only

medicated ready to use bandage (Band-aid) adhesive tape for

medicinal user, scissors, antiseptic solution (Savlon or similar) etc.

(All above contents shall be of standard makes)

(1 no. for HT Room, 2 nos. for LT Room)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

14.3 Supply & fixing of printed instruction (First Aid) Chart both in English 2 Nos. 130.29 Rupees One Hundred Thirty and Paise

and Gujarati and duly framed with front glasses, for treatment of TwentyNine Only

person suffering from electric shock. (1 no. for HT Room, 1 no. for

14.4 Supplying & fixing of floor mounting stand for keeping four nos. of 3 Nos. 1798.81 Rupees One Thousand Seven Hundred

FIRE buckets comprising 1500 mm in length, 900 mm height frame NinetyEight and Paise EightyOne Only

made out of 30mm X30 mm X 4 mm angle iron with cross supports

for legs, welded with 4 hooks and duly painted with one coat of red

lead and two coats of approved enamelled silver paint.

(For Tr. 1 & 2, DG set)

14.5 Supply and fixing of 20 W LED operated emergency light with 2 Nos. 2670.00 Rupees Two Thousand Six Hundred Seventy

maintenance free battery for 4 hours operation during mains power Only

14.6 Supply and laying of Synthetic Insulating Mat of Class - B of min. 3 Sq.mtr. 3081.51 Rupees Three Thousand EightyOne and Paise

thickness 2.5mm as per IS:15652 and with good electrical insulation FiftyOne Only

property for 11kV/22KV as per site requirement. (for HT Panel)

14.7 Supply and laying of Synthetic Insulating Mat of Class - A of min. 15 Sq.mtr. 1027.17 Rupees One Thousand TwentySeven and

thickness 2mm as per IS:15652 and with good electrical insulation Paise Seventeen Only

property for 1.1KV/3.3KV as per site requirement. (For LT Panel)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

14.8 Providing pair of rubber hand gloves ISI make suitable for working 1 No. 214.12 Rupees Two Hundred Fourteen and Paise

on 22 KV supply Twelve Only

15.0 LIASONING CHARGES FOR OBTAINING NOC 1 Ls. 25000.00 Rupees TwentyFive Thousand Only

Power Liasoning Charges for obtaining N.O.C from Electrical

Inspector / Statutory authority for Power / Ele. Installation. (Fees

shall be paid by tenderer for obtaining N.O.C. from Electrical

Inspector / Statutory authority on behalf of client and shall be

reimbursed on submission of original receipt to Client).

Liasoning Charges shall include preparing required attested

documents & drawing for obtaining NOC on behalf of client

(Applicable Fees / deposits shall be reimbursed by Client).

SCHEDULE OF QUANTITIES & RATES FOR SITC OF ELECTRICAL, MECHANICAL & INSTRUMENTATION WORKS WITH 5 YEARS O&M FOR RAW WATER PUMPING STATION (RWPS) AT

SUGHAD WTP OF GMC.

1.0 PRESSURE MEASURING SYSTEM: 4 Nos. 2213.00 Rupees Two Thousand Two Hundred

Supply, installation, testing & commissioning of Bourden type Thirteen Only

Pressure Guage glycerene filled having 150 mm dial with necessary

fittings/accessories (Manifold valve, nipples, etc. shall be in SS

only) as per specifications & complete in all respects.Pressure gauge

shall be provided on each Pump delivery side.

Range : 0 - 4 kg / sq.cm.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

1.1 Supply, installation, testing and commissioning of Pressure 4 Nos. 29147.00 Rupees TwentyNine Thousand One Hundred

Transmitter with local display along with two valve manifold , FourtySeven Only

required fittings, tubing (all valves, fittings, tubings, etc. shall be in

SS 316 only), all accessories, hardware, etc. complete in all respects

as per specifications and having following measurement ranges:

Range : 0 - 4 Kg/cm2 (at each pump discharge line )

2.0 LEVEL MEASURING SYSTEM FOR SUMP 2 Nos. 59436.00 Rupees FiftyNine Thousand Four Hundred

Supply, installation, testing and commissioning of Ultrasonic type ThirtySix Only

Level Transmitter with remote type transmitter with 20 meter

cable between Sensor and Transmitter along with all required

accessories, Weather proof enclosure for transmitter for outdoor

application, mounting stand , etc. complete in all respects as per

specification and having following measurement ranges for liquid

(Water) application:

The scope also includes providing 4" flanged puddle pipe

approximate 300 mm long including fixing of the same in existing

civil structure slab of Sump for mounting of sensor .The work also

include all necessary work like make hole,repair / modificationin

existing slab, etc.

Supply,Range: upto 10testing

installation, m (at both compartment ofofsump)

and commissioning Float type Level 2 No. 12802.00 Rupees Twelve Thousand Eight Hundred Two

Switch along with 10 mtr. Cable and WP Junction Box (at sump for Only

dry run protection of pumps through relay multiplication in PLC),

etc., complete in all respects and as per specification.The scope

also includes providing 4" flanged , puddle pipe approximate

mm long including fixing of the same in existing civil structure slabe

of pump house for mounting of level switch.The work also include

all necessary work like make hole,repair / modificationin existing

Meas. Range: upto 10 m (at two nos. suction pit of sump )

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

2.2 Supply, installation, testing & commissioning of Float & Board type 2 Nos. 17718.00 Rupees Seventeen Thousand Seven Hundred

level indicator along with all accessories, hardware, etc. complete Eighteen Only

in all respects as per specifications and having following

measurement ranges:

Meas. Range: upto 7 m (at both compartment of sump)

3.0 ELECTRO MAGNETIC FLOWMETER MAINS OPERATED Supply, 1 No. 613220.00 Rupees Six Lacs Thirteen Thousand Two

installation, testing and commissioning of Full Bore Electromagnetic Hundred Twenty Only

flow meter comprising of IP-68 Sensor, IP-66 remote type

transmitter with 20 m cable between sensor and transmitter along

with all mounting accessories, Weather proof enclosure for

transmitter, hardware, mounting stand, etc.

as per specification and to complete the work in all respect as per

site condition necessary connection with pipe and shall have

following size.

Meter Size : 1200 mm NB (at Sump Inlet)

Pipe Size : 1200 mm NB

3.1 Meter Size : 600mm NB (at Type-1 Pump common header) 1 No. 303222.00 Rupees Three Lacs Three Thousand Two

Pipe Size : 600 mm NB Hundred TwentyTwo Only

3.2 Meter Size : 400mm NB (at Type-1I Pump Common header) 1 No. 211120.00 Rupees Two Lacs Eleven Thousand One

Pipe Size : 400 mm NB Hundred Twenty Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

4.0 PLC BASED CONTROL PANEL FOR WDS 1 No. 1545800.00 Rupees Fifteen Lacs FourtyFive Thousand

Supply, Installation, Testing & Commissioning of PLC Based Eight Hundred Only

Instrument control Panel with 10" color touch Screen HMI, 4G GPRS

modem with (ethernet port + SIM slot), Communication port for

MFM , Instrument Control Panel '(PLC Enclosure / Panel ) with

necessary PLC based logic and wiring , Min. 1 kVA online UPS (with

60 min backup), etc. complete in all respects and as per specs with

PLC having minimum I/O count of 102DI /54DO / 18AI /10AO.

These are the minimum IO requirement if any other IO,s required to

complete the work contractor shall be provide the same without

any extra cost.

5.0 INSTRUMENT CABLE & ACCESSORIES 350 MTR. 146.00 Rupees One Hundred FourtySix Only

'Supply, Laying, Installation, Connection, Termination, Testing &

Commissioning of Instrument Cables as per specs.

The unit rate shall include

a) Supply, loading & unloading of the cable at site from store.

b) Shifitng of cable from site store to place of installation.

c) Fixing of cable clamps, brackets, supports, route markers etc.

where ever required to fix the cables safely.

d) Excavation, back filling and levelling of ground alongwith laying of

fine sand, protection bricks and other necessary civil material for

laying cables outside the building.

f) Testing and submission of sketches & reports of all the cables laid.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

5.1 SIGNAL CABLE 700 MTR. 133.00 Rupees One Hundred ThirtyThree Only

5.2 CONTROL CABLE 1200 MTR. 381.00 Rupees Three Hundred EightyOne Only

6.0 INSTRUMENT CABLE TRAY 40 MTR. 730.00 Rupees Seven Hundred Thirty Only

Supply and installation / erection of Perforated type cable tray of

galvanized mild steel sheets of 2 mm thickness with required,

hardware, fitting and support structral asccessories . All material

shall be Hot dip galvanised as per IS 2629 and tray hardware shall

be in GI. Support structutre shall be of structral steel for mounting

the cable tray on wall / cable trench or as per site condition,

450 X 25 mm - Perforated type

6.1 100 X 25 mm - Perforated type 60 MTR. 344.00 Rupees Three Hundred FourtyFour Only

6.2 50 X 25 mm - Perforated type 30 MTR. 291.00 Rupees Two Hundred NinetyOne Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

7.0 CABLE END TERMINATION AND CONNECTION : 12 Nos. 160.00 Rupees One Hundred Sixty Only

'Supply, fixing, connection, testing and commissioning of double

compression brass cable glands and crimping type Bimetalic lugs /

sockets with necessary tools and equipments as specified in

specifications and IS complete in all respects. The glands and lugs

/ sockets shall be suitable for cable size and type mentioned above.

The job also includes earthing the glands and armour of the cable

with common earth bar or flexible copper mesh as applicable.

7.1 SIGNAL CABLE 22 Nos. 160.00 Rupees One Hundred Sixty Only

7.2 CONTROL CABLE 42 Nos. 230.00 Rupees Two Hundred Thirty Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

SCHEDULE OF QUANTITIES & RATES FOR SITC OF ELECTRICAL, MECHANICAL & INSTRUMENTATION WORKS WITH 2 YEARS O&M FOR SYPHON & RWPH AT SUGHAD WTP OF GMC.

1.0 OFFICE FURNITURE 2 Nos 6000.00 Rupees Six Thousand Only

Office Table of size 1200 mm length X 600 mm width

1.1 Steel Office chair 6 Nos 4000.00 Rupees Four Thousand Only

1.2 Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D) 1 No 20000.00 Rupees Twenty Thousand Only

2.1 Magger of range 0 -1000V 1 No 6000.00 Rupees Six Thousand Only

2.2 Clipon meter (Battery operated) satisfying the following. 1 No 8000.00 Rupees Eight Thousand Only

(i)With 0.100 mA, 0-1 A and 0-200 A AC

(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm,

(iv) The input impedence shall not be less than one maga ohms for

2.3 Single Phase Elect. Portable Air blower 1500 RPM 1 No 6000.00 Rupees Six Thousand Only

3.0 LADDER 1 No 18000.00 Rupees Eighteen Thousand Only

Ladder shall be made out of light aluminium allow of good strength.

They shall be of step ladder, foldable, self supportig type with

sperader of metalic angles or high strength.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

PROVIDING AND LAYING RISING MAIN OF 600 MM DIA. DI-K9 PIPE FROM PROPOSED RWPS TO SUGHAD WTP

Excavation for pipeline trenches as per required gradient and line 382 m Rupees EightyNine Only

including all safety provision using site rails and stacking excavated

stuff including up to all required lead cleaning the site etc. complete

for all lift and strata as specified. In all sorts of Soil and soft murrum.

b) 1.5 to 3.0 m. 27 m Rupees NinetyEight Only

02 Providing and supplying D.I.K-9 grade pipe with EPDM gasket for 150 Rmt 10309.00 Rupees Ten Thousand Three Hundred Nine

following nominal bore diameter with internal cement mortar Only

lining including all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading, conveyance to site,

stacking etc. complete. (IS 8329-2000). For Sewerage project

cement mortor lining shall be with sulphate resistance cement.

600 mm dia (DI-K9)

03 Lowering, laying and jointing DI Pipes of various classes with 150 Rmt. 404.00 Rupees Four Hundred Four Only

specials of following diameters in propoer position grade and

alignment as directed by Engineer in charge.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

04 D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron flanged 820 Kg 151.00 Rupees One Hundred FiftyOne Only

Socket Spigot Bends, tees,reducers or any other specials as per BS-

EN-545/1995 Class-A series K12 suitable for use with D.I Pipes

manufactured as per IS:8329/1994 delivery of specials to site of

works any where in Gujarat including fixing, all taxes, loading,

unloading, carting, stacking,insurance, inspection charges, octroi

etc. complete. (8 % of Pipe material cost)

Socket & Spigot Type

a) Above 300 mm dia

05 Providing, supplying & fixing ISI mark Cast Iron D/F Sluice Valves as 1 No 126744.00 Rupees One Lacs TwentySix Thousand Seven

per IS 14846 (Latest edition) of following class and diameter Hundred FourtyFour Only

including all taxes, insurance, transportation, fright charges, Octroi,

Inspection charges, loading, unloading, conveyance to site stacking,

PN 1.0 with hand wheel /cap operated (PD Type Short body)

a) 600 mm dia (Sluice valve)

06 Providing and supplying CI/DI Tamper proof /Bi Stream Air valves 1 No. 25154.00 Rupees TwentyFive Thousand One Hundred

with SS 304 Float gun metal nozzle of approved make & quality of FiftyFour Only

following class and diameter including all taxes,insurance,

transportation, freight charges, octroi,inspection charges, loading,

unloading, conveyance to the departmental stores, stacking etc.

With Isolating Sluice Valve PN

07 Lowering, laying & jointing in position following air Valves including 1 No. 605.00 Rupees Six Hundred Five Only

cost of all labour, jointing material, including cost of all

labour,jointing material including nut bolts & giving satisfactory

hydraulic testing, etc. complete.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

08 Providing and laying cement concrete M15 (1:2:4) (1 cement : 2 40 m3 3758.19 Rupees Three Thousand Seven Hundred

coarse sand : 4 hand broken stone aggregate 20 mm nominal size) FiftyEight and Paise Nineteen Only

and curing etc. complete (Excluding cost of form work) For

Foundation and in plinth(up to 10 ton) (T.B & Road)

09 Providing and laying controlled cement concrete M20 (1:1.5:3) for 112 Cum 4422.47 Rupees Four Thousand Four Hundred

thrust block & encasing including formwork but excluding the cost TwentyTwo and Paise FourtySeven Only

of reinforcement with curing etc. complete, as directed.(T.B

Encasing & Road)

10 Providing TMT Bar Fe-500/500D reinforcement bars for R. C. C. 3 MT 77285.20 Rupees SeventySeven Thousand Two

work including bending, binding and placing in position complete Hundred EightyFive and Paise Twenty Only

upto floor two level. (T.B.+Road)

11.0 Demolition including stacking of serviceable materilas and disposal 87 m3 1110.75 Rupees One Thousand One Hundred Ten and

of unserviceable materials with all lead and lift. (i) R.C.C. work Paise SeventyFive Only

12.0 Providing & laying Trimix with dewatering machine and floater 375 m2 54.00 Rupees FiftyFour Only

machine on constructed RCC work incl. cost of machine and labour

etc compact directed.

13.0 Making 15 mm groove in RCC work on road and filling it with 94 Rmt 30.00 Rupees Thirty Only

polysulfide selant and finished it good incl. all labour charges etc

comp as directed.

14.0 Refilling the pipeline trenches incl. ramming, watering, 366 m3 22.00 Rupees TwentyTwo Only

consolidating desposal of surplus stuff as directed within a radius

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

15.0 Construction of chambers in RCC M30 with TMT Fe-500 51 m3 89.00 Rupees EightyNine Only

reinforcement, PCC150 mm thick in M 15 ,20 mm thick inside

cement plaster in C.M.1:3 with OPC cementand depth of chamber

from G.L. to pipe invert level including complete civil works and

inclusive of the cost of excavation, refilling and PVC foot steps

including providing RCC Slab in one single piece with fixing of FRC

(heavy duty) manhole frame and cover or RCC 1:2:4 Precast slab in

parts with key hole etc. complete.

1.5 m. to 3.0 m. 43 m3 98.00 Rupees NinetyEight Only

b) PCC M-15 4 m3 3758.19 Rupees Three Thousand Seven Hundred

FiftyEight and Paise Nineteen Only

c) RCC M 30 12 m3 8083.00 Rupees Eight Thousand EightyThree Only

RC.C. Top Slab 5 m3 8213.00 Rupees Eight Thousand Two Hundred

RC.C. Base Slab 7 m3 8213.00 Rupees Eight Thousand Two Hundred

d) TMT Fe-500 Reinforcement 2 MT 77285.20 Rupees SeventySeven Thousand Two

Hundred EightyFive and Paise Twenty Only

e) 20 mm thick Inside Cement Plaster in CM 1 : 3 40 m2 286.10 Rupees Two Hundred EightySix and Paise Ten

f) FRC Manhole 2 No. 2380.00 Rupees Two Thousand Three Hundred Eighty

g) Refilling 52 m3 22.00 Rupees TwentyTwo Only

h) PVC steps 14 No. 87.00 Rupees EightySeven Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

16.0 Conveyance of materials such as murum, earth, kapchi, gravel, brick 56 m2 103.26 Rupees One Hundred Three and Paise

bats, kankar, sand, debris etc. from the site to approved location, TwentySix Only

including loading, unloading, stacking and spreading etc. complete.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

SCHEDULE OF QUANTITIES & RATES FOR SITC OF ELECTRICAL, MECHANICAL & INSTRUMENTATION WORKS WITH 5 YEARS O&M

FOR SYPHON & RWPH AT SUGHAD WTP OF GMC.

1.1.1 Staff Salary 12 Months 57945.00 Rupees FiftySeven Thousand Nine Hundred

During First Year FourtyFive Only

The works of this schedule comprises of the supply of all spare parts as

required including the supply of all labour (including reliever to ensure

presence of specified type and no. of manpower per shift), materials,

consumables (except electrical power), equipment, tools and tackles and

comprehensive operations and maintenance of the SYPHON & RWPH

during the O & M period from the date of successful commissioning.

Total staff salary for O&M period (of 60 months) for Operation, security,

repairing and maintenance for the complete O&M period

a) Pump operator (ITI-Wireman/Eletrician) (3 nos - One for each shift of

1.1.2 Total of Manpower for Second Year (10% of Escalation on previous 12 Months 63740.00 Rupees SixtyThree Thousand Seven Hundred

year) Fourty Only

1.1.3 Total of Manpower for Third Year (10% of Escalation on previous 12 Months 70114.00 Rupees Seventy Thousand One Hundred

year) Fourteen Only

1.1.4 Total of Manpower for Forth Year (10% of Escalation on previous 12 Months 77126.00 Rupees SeventySeven Thousand One

year) Hundred TwentySix Only

1.1.5 Total of Manpower for Fifth Year (10% of Escalation on previous 12 Months 84839.00 Rupees EightyFour Thousand Eight Hundred

year) ThirtyNine Only

1.2.1 Helper cum Security - (Min. 10th pass & of age < 45 years) (3 nos. - 12 Months 55389.00 Rupees FiftyFive Thousand Three Hundred

One for each shift of 8 hrs.) - for SYPHON & RWPH AT SUGHAD WTP EightyNine Only

1.2.2 Total of Manpower for Second Year (10% of Escalation on previous 12 Months 60928.00 Rupees Sixty Thousand Nine Hundred

year) TwentyEight Only

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

1.2.3 Total of Manpower for Third Year (10% of Escalation on previous 12 Months 67021.00 Rupees SixtySeven Thousand TwentyOne

1.2.4 Total of Manpower for Forth Year (10% of Escalation on previous 12 Months 73724.00 Rupees SeventyThree Thousand Seven

year) Hundred TwentyFour Only

1.2.5 Total of Manpower for Fifth Year (10% of Escalation on previous 12 Months 81097.00 Rupees EightyOne Thousand NinetySeven

2.1.1 Comprehensive Maintenance 12 Month 21220.00 Rupees TwentyOne Thousand Two Hundred

Comprehensive repairing, spares and maintenance of entire works Twenty Only

alongwith administration & management charges including running

office, cost of lubricants, consumables, spares, tools, statutory

periodical approvals & testing of eqipments etc. required in all

except supply of ele. power and water during O&M period (for First

Year of O&M period) - FOR SYPHON & RWPH AT SUGHAD WTP

(Covered under Defect Liablity Period for First Year and

consumables @0.5% of EMI cost)

2.1.2 Total of Comprehensive Maintenance, repairing, Spares, 12 Months 58353.37 Rupees FiftyEight Thousand Three Hundred

Consumables etc. for Second Year (0.75% for spare + 0.5% for FiftyThree and Paise ThirtySeven Only

consumables = 1.25% with 10% of Escalation on previous year)

2.3 Total of Comprehensive Maintenance, repairing, Spares, 12 Month 64189.00 Rupees SixtyFour Thousand One Hundred

Consumables etc. for Third year of O&M period (10% of Escalation EightyNine Only

on previous year)

2.4 Total of Comprehensive Maintenance, repairing, Spares, 12 Month 70608.00 Rupees Seventy Thousand Six Hundred Eight

Consumables etc. for Fourth year of O&M period. (10% of Only

Escalation on previous year)

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

2.5 Total of Comprehensive Maintenance, repairing, Spares, 12 Month 77669.00 Rupees SeventySeven Thousand Six Hundred

Consumables etc. for Fifth year of O&M period. (10% of Escalation SixtyNine Only

on previous year)

I/We am/are willing to carry out the work at ________% above/below percent (should be written in figures and words) of the estimated rate mentioned above.

Amount of my / our tender works out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct____% below Add____% Above

In words In words

1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

2 All columns in the Schedule should be filled in ink and the total of the entire in the last columns should be struck by the contractor under his signature.

3 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site, moisture, weather etc.

4 To be continued on additional sheets, if found necessary.

5 The Labour Cess will be deducted as per prevailing rules i.e.1% of the work done.

6 GST is applicable seperatly for all type of works by the Client (Total Tender Cost is without GST).

7 The bituminous work shall be carried out by the contractor or as under by utilizing.

8 For abnormal high or law rates payment of such items shall be regulated as per Govt. Circular letter No. Parach-102008-61-S dated 27-11-2008 attached with tender papers.

9 From dt. 1-7-2017 GST is applicable hence Agency should quote price accoringly. Any dispute regarding this will not be considered by GMC.

10 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no ext

11 GST and Income tax TDS will be deducted at a source while making payments of bills.

Item Description Qty. Unit Rate in Rs. Amount

No. in Fig. in words in Rs.

12 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in SOR used for preparation of Estimate.

Signature of Contractor

The Deputy Commissioner

Gandhinagar Municipal Corporation (GMC),